Atal Tools

The UTL8200 series electronic load is equipped with a 2.8-inch LCD display, which is convenient and simple to operate, stylish and generous, stable in operation, has a wide power measurement range, voltage and current measurement speeds up to 40kHz, and a test resolution of up to 1mV/1mA, with rich test functions and modes, and standard RS-232C communication interface, flexibly meet various on-site test conditions, and realize seamless connection with automated production lines and automatic test systems (ATS).
 
UTL8211: Single channel 150V /40A, 400W
CC/CV/CR/CP four basic modes
1mV/1mA high resolution
Dynamic current test
Voltage and current measurement speed up to 40kHz
Multi-mode battery discharge test
List mode, support automatic test
Independent short circuit test function
Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection etc.
Supporting PC software to realize remote operation and monitoring
Power-off memory function
Intelligent temperature control fan
Standard RS-232C interface, support SCPI protocol

UTL8200+series electronic load is equipped with a 2.8-inch LCD display, which is convenient and simple to operate, stylish and elegant in appearance, stable in operation.Supports dual-channel completely independent testing, has a wide power measurement range, and has a test resolution as high as 1mV/1mA.
Function:

2.8-inch 24-bit true color LCD display

Maximum power 400W,maximum current 40A,maximum voltage 150V

4.8MHz Current-Voltage Synchronous ADC Sampling

Single channel 400W 

1mV/1mA measurement resolution

Four basic operation modes CC, CV, CR, and CP

Up to 5kHz dynamic current test

Programmable current rise and fall rate

Support short circuit(short)simulation function

Support multi-mode battery discharge mode

List mode, support automatic test, support quick uninstall

Over-voltage, low voltage, over current, over power, overheat protection

Power polarity reverse alarm

Infinite servo, intelligent fan system

Power off memory function

Standard RS232 interface

Standard SCPI protocol

Equipped with host computer software to realize remote operation and monitoring

The UTL8200 Series is designed for users requiring a DC load with a compact form factor which is widely used in basic applications such as product production line and maintenance. Small size, easy operation, rich testing functions and modes, support for dual-channel independent testing,  the standard RS-232 interfaces for remote communication to meet your diversified test requirements, easy to connect seamlessly with automatic production line and  automatic test system (ATS). With a wide range of power measurement,  voltage and current measurement speed up to 40kHz, test resolution up to 1mV/1mA, the UTL8200 series is a cost-effective DC load with performance specifications that rival any instrument in its class.

UTL8200+ series electronic load is equipped with a 2.8-inch LCD display, which is easy to operate and stylish in appearance. Its test resolution is up to 1mV/1mA. Equipped with rich test functions and modes for you to choose. The equipment is equipped with RS232 communication module, which can flexibly meet various on-site test conditions, and is convenient for seamless connection with automated production lines and automatic test systems. The electronic load operates stably and has a wide range of applications, adapting to various testing requirements.

Voltage- 150V

Power- 400W

Current-20A/40A

• 1/2 2U standard rack size, suitable for rack-mount use.
• 3.9-inch TFT color LCD display
• Measurement range: 0-150V/0-20, 200W
• Four operation modes Supports: constant voltage, constant current, constant resistance, constant power
• Dynamic current testing supports, with dynamics up to 10kHz
• High-resolution voltage and current readback: 1mV/0.1mA
• Remote compensation supports.
• Multiple protections: overvoltage, overcurrent, overpower, overheat, etc.
• Standard RS232 interface, supports SCPI protocol.

UTL8500+ series DC electronic load is a new generation of intelligent large-screen and cost-effective electronic load. Up to 500KHz synchronous sampling, high-performance DSP processing. The fast, efficient and intuitive LIST programmable automatic test mode meets most R&D and testing needs.

• Voltage: 500V
• Current 30A
• Total Power: 400W
• Resolution: 0.1mV/0.01mA
• Max Dynamic Frequency: 50kHz

New Launch

The UTL8500+ Series is a cost-effective programmable DC electronic load series with high performance. With a resolution of 0.1mV and 0.1mA,  multiple protection mechanisms significantly improve the reliability of the equipment.  The Series has a variety of testing functions and modes, equipped with RS-232 communication interface, and can be equipped with other  communication interfaces according to design and testing requirements.The Series provides a flexible, fast and effective solution.

• 150V Voltage 30A Current 150W Total Power,  0.1mV/0.01mA Resolution
• 4.3 inch LCD screen display: 
• Four basic working modes: CC/CV/CR/CP,
• Multiple protection functions Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection, etc.
• UTL8500 series electronic loads provide more test modes for users to choose, including dynamic test, list test, combination test, OCP/OPP test, CR-LED test, battery test, load effect, OVP test , Short circuit, time test and other modes.
• Screenshot function, list call and system upgrade Press the [Screenshot] button to save the current screen image to the USB flash drive,or save the frequently used list test files in Flash or USB flash drive, so that they can be called when needed next time, and the system can be upgraded quickly through the USB flash drive.

 
150V VOLTAGE 30A CURRENT 300W TOTAL POWER 0.1mV/0.1mA RESOLUTION ½ 2U SIZE RS232,(Optional RS232-RS485, RS232-USB) CONNECTIVITY
4.3 inch LCD screen display 4.3 inch LCD screen display Resolution: 0.1mV/0.1mA Voltage test range: 0~150V Current test range: 30A Power test range: 0~300W
Four basic test modes Four basic working modes: CC/CV/CR/CP,Multiple protection functions Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection, etc.
Rich test mode In order to meet diversified test requirements, UTL8500 series electronic loads provide more test modes for users to choose, including dynamic test, list test, combination test, OCP/OPP test, CR-LED test, battery test, load effect, OVP test , Short circuit, time test and other modes.
Screenshot function, list call and system upgrade Press the [Screenshot] button to save the current screen image to the USB flash drive,or save the frequently used list test files in Flash or USB flash drive, so that they can be called when needed next time, and the system can be upgraded quickly through the USB flash drive.