Atal Tools

The UDP6900 series are single output programmable DC power supplies. It can achieve a variety of voltage and current combination outputs under a fixed power. A single power supply can meet the test of two types of DUTs, high voltage and low current or high current and low voltage, greatly saving your cost and space. UDP6900B series has standard RS232, RS485, LAN, USB and analog interfaces, supports SCPI protocol, and is convenient for remote control, industrial PLC control and building an intelligent test platform. Widely used in various testing fields such as DC/DC power modules, battery charging and sensors

• DC Voltage: 0–60V
• DC Current: 0–25A
• DC Power: 600W
• Type: Switching
• Resolution: 1mV/0.1mA
• Channels: One
• Class leading performance: High accuracy and resolution with low ripple and noise
• Multiple protection: OVP (Over Voltage Protection) and OCP (Over Current Protection)
• Easy to use: Voltage and current can be adjusted by the numeric keyboard and the encoder knob
• Programmable: Control the output of the voltage and current. Directly set your test scenario or use SCPI, Multi-SCPI, or Modbus RTU protocols
• Interfaces: RS232 & RS485 communication interfaces. LAN port supports Web remote control and VXI bus. USB Host and Device
• Rack mountable: Includes both front and rear panel connections
• Memory: Supports 18x8 group memory for saving and loading
• Output time control: Can be set (0.1–99999.9 seconds)
• Output slope control: Supports output voltage and current slope setting
• Digital voltmeter: Built-in 4 ½ digit voltmeter for outside measurement
• Remote sense: Used to avoid voltage drops due to long wires
• External controls: analog control and digital control
• Energy efficient: Build for high efficiency and low heat generation. Intelligent fan control saves energy
• Display: 4.3” TFT true color LCD. Simultaneous display of the set voltage and current, output voltage and current. Adjustable backlight
• Input voltage range: Supports 100 to 240V

• 1/2 2U standard rack size, suitable for rack-mount use.
• 3.9-inch TFT color LCD display
• Measurement range: 0-150V/0-20, 200W
• Four operation modes Supports: constant voltage, constant current, constant resistance, constant power
• Dynamic current testing supports, with dynamics up to 10kHz
• High-resolution voltage and current readback: 1mV/0.1mA
• Remote compensation supports.
• Multiple protections: overvoltage, overcurrent, overpower, overheat, etc.
• Standard RS232 interface, supports SCPI protocol.

UNI-T's UTP3305 DC power supply is a 3-channel power supply with 2 adjustable output and 1 fixed 5V output. It can output a maximum of 32 Volts and 5 Amps.

• Dual channel, two circuits of adjustable output voltage 0~32V and one circuit of fixed voltage 5V.
• Master-slave tracking, constant voltage and current,
• ???, ??? circuit can be used for master-slave tracking and used in parallel or in series.
• Low ripple, low noise
• High regulation: 0.01%
• Output ON/OFF control
• Constant voltage and constant current operation
• Overload protection, reverse polarity protection

• 1/2 2U standard rack size, suitable for rack-mount use.
• 3.9-inch TFT color LCD display
• Measurement range: 0-150V/0-40A, 400W
• Four operation modes Supports: constant voltage, constant current, constant resistance, constant power
• Dynamic current testing supports, with dynamics up to 10kHz
• High-resolution voltage and current readback: 1mV/0.1mA
• Remote compensation supports.
• Multiple protections: overvoltage, overcurrent, overpower, overheat, etc.
• Standard RS232 interface, supports SCPI protocol.