Atal Tools

Features of UT200+ Series 400A/600A Digital Clamp Meters

● True RMS

● LCD backlight

● Large screen and display digits

● 60mF large capacitance measurement (UT202A+/UT204+)

● Neutral/live wire test (UT202A+/UT204+)

UT200 series are 6000-count digital clamp meters with auto range, large LCD, true RMS, autoscale memory, and NCV functions. They conform to CAT III 1000V/CAT IV 600V safety rating andcerti???ed by CE/ETL. The  UT207B come with LoZ mode for eliminating ‘ghost ’voltage, LPF ACV function for measuring INV and VFD voltage, and inrush current modefor capturing transient current. 

• Flashlight button: Short press thisbutton to turn on/o  the  ashlight.
• Inrush current capture
• NCV Multi-Segment Display and audio/visual alarm
• True RMS/Auto backlight
• NCV/Function retention

- It has stable performance, high precision, high reliability, clear reading and overload protection.
- Lightweight, portable and easy to carry, it is suitable for professional and home use.
- True Rms Sensing
- 600A AC/DC
- LCD Backlight Display
- Small Current Measurement

It can measure DC/AC voltage and current, resistance, capacitance, temperature, frequency, diode, NCV and true RMS and other parameters.

UT256 is a CAT III 600V auto-ranging True RMS fork meter that measures 60A AC/DC current. It can detect the presence of voltage via the integrated non-contact voltage (NCV) sensor on the tip of the fork. The easy-to-use interface with bright backlight can help users finish the work efficiently and conveniently. The specially designed slim meter shell and thin fork are quite useful for cable measuring in narrow spaces. The meter comes with two 1.5V AAA batteries that can easily be changed, and the easy-access door is built for fast battery changes.

Features:

• 60A AC/DC current measurement
• True-RMS
• Jaw opening: 10mm
•  Zero function
•  Data hold
• Relative mode
• NCV
• CAT III 600V

UNI-T''s UT211B is a mini 60A True RMS high-precision digital clamp meter with auto range and zero mode. It can troubleshoot small current circuit (mA).
- Standard AccessoriesBatteries, Test Lead

- Max AC current resolution: 0.1mA
- Max DC current resolution: 1mA
- Data hold, LCD backlight
- True RMS
- 17mm jaw

● True RMS

● LCD backlight

● Large screen and display digits

● 60mF large capacitance measurement (UT202A+/UT204+)

● Neutral/live wire test (UT202A+/UT204+)

• 1000A AC current measurement
• 1000V AC/DC voltage measurement
• 600A inrush current measurement (UT206A+)
• Temperature (UT206A+) NCV (UT206A+) ACV frequency 10Hz～10kHz
• Jaw opening: 45mm
• Resistance / capacitance / frequency measurement
• Auto range / backlight / low battery indication
• Continuity / diode / duty cycle
• MAX/MIN
• Data hold / flashlight / relative mode
• Auto power off
• CAT II 1000V/CAT III 600V

UT216 series digital clamp meters are designed for measuring high frequency currents (up to 400Hz) in server rooms, IT systems, etc. Its double injection design gives users a more comfortable grip and enhanced durability. UT216’s 6000 count display also provides more precise readings for users.

• True RMS
• Auto range, 3 times/s sampling rate
• MAX/MIN/Relative modes
• Flashlight
• NCV, non-contact AC voltage testing

• Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement with measurement accuracy
• Removable magnetic display can be mounted where it is easily seen
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
• CAT IV 600 V, CAT III 1000 V

Mastech 2108 Clamp Meter, True Rms

• 600A AC/DC
• 6600 Counts

MS2108 is a versatile and invaluable tool for electricians, technicians, professionals and alike. You can use it to measure AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, continuity and even diode test. This true RMS clamp meter has inrush current measurement, which is designed to capture inrush current accurately and , most importantly synchronously and provide readings that accurately depict what the circuit protector experiences.

UNI-T's UT210E is a mini 100A True RMS auto range digital clamp meter with 2000 display count and VFC function.

Features:
1. VFC, low pass filter
2. NCV
3. Ergonomic and lightweight
4. Auto range, 2~3/s sampling rate
5. True RMS
6. ZERO mode
7. LCD backlight, data hold
8. Auto power off, low battery indication

UT216 series digital clamp meters are designed for measuring high frequency currents (up to 400Hz) in server rooms, IT systems, etc. Its double injection design gives users a more comfortable grip and enhanced durability. UT216’s 6000 count display also provides more precise readings for users.

Features:

• True RMS
• Auto range, 3 times/s sampling rate
• MAX/MIN/Relative modes
• Flashlight
• NCV, non-contact AC voltage testing

This Instrument is well designed for on-line measurement of DC/AC leakage current and current below 600V, which adopts latest CT and digital integration technology. Slender clamp is very suitable for places full of concentrated cables (such as, electric power metering system, high-speed rail system, automobile circuit maintenance and so on). Non-contact measurement ensures operation safety. The meter has mini shape with high accuracy, stable performance and perfect functions.

• Current (A): 0mA 60.0A AC/DC, Resolution: 1mA AC/DC       
• Frequency Response      AC: 45HZ 200HZ
• RS-232 Data Transmission
• Data Storage: 99 groups

UT200 series are 6000-count digital clamp meters with auto range, large LCD, true RMS, auto scale memory, and NCV functions. They conform to CAT III 1000V/CAT IV 600V safety rating and certified by CE/ETL. The UT208B comes with LoZ mode for eliminating ‘ghost ’voltage, LPF ACV function for measuring INV and VFD voltage, and inrush current mode for capturing transient current. The UT208B also features high-precision temperature measurement with 0.1 °C resolution and can be equipped with a flexible current probe to extend the AC current measurement range to 3000A.

Features:

• Flashlight button: Short press this button to turn on/off the flashlight.
• NCV Multi-Segment Display and audio/visual alarm
• True RMS/Auto backlight
• NCV/Function retention

• High-Precision Measurement: 10,000-count True RMS intelligent clamp meter for accurate readings.
• Wide Measurement Range: Supports up to 750V voltage and 600A current.
• High-Quality Display: 2.0-inch 240 × 320 full-color TFT screen for clear visuals.
• Intuitive Interface: New UI with data curve display for easy reading at a glance.
• Three Measurement Modes: Switch freely between general measurement, waveform display, and power measurement modes.
• NCV Function: Non-contact voltage measurement and zero/fire line identification.
• Wide Temperature Range: Measures temperatures from -55°C to 1300°C.
• Long-Lasting Battery: Built-in 3.7V 1500mAh battery for extended usage.
• Type-C Interface: Convenient charging and data transmission via Type-C port.
• Additional Functions: Includes a flashlight, screen backlight, and data-saving capabilities.
• Auto Power-Off: Intelligent automatic shutdown to conserve battery life.
• Temperature Unit Switching: Easily switch between temperature units (℃/℉).
• Adjustable Brightness: Screen brightness is adjustable for various environments.
• Firmware Upgradeable: Supports firmware updates to enhance functionality.

The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.

The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.

Measure:

• Voltage to 1000 V AC or DC
• Resistance to 60 kΩ with continuity detection
• Min, max, average, and inrush recording to capture variations automatically
• 500 mV DC measurement range to interface with other accessories
• 1000 μF capacitance measurement

UT200+ series digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, featuring overload protection, high reliability, high safety and high accuracy. These meters can be used to measure high-voltage frequency, temperature, AC current, etc.

• True RMS
• LCD backlight
• Large screen and display digits
• 60mF large capacitance measurement 
• Neutral/live wire test 

• AC Voltage: 6V- 750V Trms
• DC Voltage: 600mV- 1000V
• AC Current : 0.01A,  60A, 1000A
• Frequency: Upto 10mhz, resistance : Upto 60m, capacitance: Upto 6000uf
• Continuity buzzer, diode checking and ncv (non contact voltage)

Please note that this does not measure DC Current

• Rotating clamp jaws facilitate the measurement at physically awkward positions, vertical bus bars, conductors placed at positions difficult to access.
• Comfortable operation of push buttons and function selector switch, in adverse field conditions.
• Clamp jaws can be opened or closed with the trigger placed at bottom side away from the jaws. This allows the user to place his/her hand at safer distance from live conductor. This greatly reduces exposure of human beings to electrical shocks.

UT-CS09D flex clamp sensor solves problems in measuring high current conductors in tight spaces. Its Rogowski coil based current sensor provides stable, safe, and high reliable measurements up to 3000A. This unique design and lightweight feature make it a great choice for professional electricians.

Features

• Flex clamp can measure from 1.5A to 3000A current
• 1m drop proof
• Robust terminal connection
• Directly displays current when connected to UT206B/208B

The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots.

• Expanded 25°C to 65°C operating temperature range.
• Drop proof design withstands drop from a height of 1 meter.
• Measure the fundamental waveform component using the average rectified method

UT210 series mini clamp meters are designed to work well in limited space environments. These are essential tools for mechanical and electrical equipment maintenance, home appliance installation and electrician duties.UT210 series mini clamp meters are designed to work well in limited space environments. These are essential tools for mechanical and electrical equipment maintenance, home appliance installation and electrician duties.

Features:

• Ergonomic and lightweight
• Auto range, 2~3 times/s sampling rate
• LCD backlight, data hold
• Auto power off, low battery indication

Mastech 2108 Clamp Meter, True Rms

• 600A AC/DC
• 6600 Counts

MS2108 is a versatile and invaluable tool for electricians, technicians, professionals and alike. You can use it to measure AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, continuity and even diode test. This true RMS clamp meter has inrush current measurement, which is designed to capture inrush current accurately and , most importantly synchronously and provide readings that accurately depict what the circuit protector experiences.

• Battery-powered Hall-effect probe measures 1A to 400 A
• 1mV/Amp output guarantees easy reading on your meter
• Take accurate current readings without breaking the circuit
• Maximum conductor Ø 32 mm
• CAT III 600 V safety rating
• Also available with softcase for DMM and clamp (i410 kit)
• One year warranty

Model   MTQ 997+

DC Voltage          400mV to 600V

AC Voltage          400mV to 600V

AC Current          600A

DC Current          600A

Resistance           0.1 to 400 Ohm to 40MOhm

Capacitance        4uF to 4mF

Frequency: 400Khz/ 4Mhz

Temperature: 0 - 750 Degree Celcius

Warranty: As per brand policy

• AC/DC current, AC/DC voltage
• Mini 100A True RMS Auto-Range Digital Clamp Meter with 20000 Display Count and VFC function.
• Standard non-contact AC voltage sensing (NCV) function
• VFC mode can filter high-frequency interference signals to ensure accurate measurement data.
• AC frequency response up to 1000Hz
• Small size, easy to carry
• Bluetooth communication function, supporting Android and Apple phones, enabling remote data viewing and instrument control (2100B)
• Support the recording function, record and analyze the measured values, share the recorded data, and work together (2100B)

The 3288-20 clamp multimeters are AC/DC current and voltage clamp meters that also measures continuity and resistance, featuring a double jaw lever and slim profile for easy access to crowded wires.

• Voltage, resistance, and continuity check functions
• Use the 3288 for high current measurements such as UPS emergency batteries and train motors

Features

• 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999
• Jaw Opening Size 30 mm
• AC/DC Currrent 600A
• Polarity : Automatic, positive implied, negative polarity indication.
• Overrange : (OL) or (-OL) is displayed.
• Zero : Automatic.

Features 

• - Display : 3⅚ Digits LCD Display
• - Display Counts : 6000
• - Jaw Opening Size : 30 mm
• - Includes Pair of Test Leads , Battery , K Type Thermocouple , Instruction Manual and Carrying Case
• - Max. DC Current Range Above 1000 A
• - Max. DC Voltage Range 601-1000 V
• - Max. AC Current Range Above 1000 A
• - Max. AC Voltage Range 601-750 V
• - Resistance Range (Ohm) 0-60 MΩ