Atal Tools

The new Rishabh Young and Rishabh iYoung Multimeter are compact, Handy & Trendy multimeters specially targeted for applications of Electrical contractors, Service Industry, Technicians, HVAC and also the education sector i.e., students who will be the future of tomorrow


Made in India

ToolWorld is Rishabh and Shanti Instruments authorized distributor

Includes calibration/conformity report

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super-fast response rate and safety features that take electrical testing to a higher level. The DT4256 is a digital multimeter designed to deliver maximum functionality for use in a wide range of settings.

• ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Measure up to 10 A with direct input.
• USB communications function supports PC measurements (optional)
• Dual display lets you check voltage and frequency simultaneously.
• Broad -25°C to 65°C (-13°F to 149°F) operating temperature range

The DM858 Series is a compact and capable benchtop 5.5 digit DMM with 7” touch display. It supports 11 measurement functions and offers a capable combination of 125 readings/s reading speed with a logging memory of 500,000 points. The DM858 includes USB and LAN interfaces to support remote control. Its small size and light weight conserve benchtop space while also allowing it to be attached to VESA-compliant stands or mounts.

• Increased reading speed- Faster and more accurate measurements Gather more data per measurement
• Deeper memory logging- Gather more data per measurement
• 7” touch screen with dual-display capability - Removes the need to switch between making measurements and observing data
• Type-C power interface- Enables the use of mobile power banks for measurement functionality on the go
• Compact form factor & VESA 100x100 compliant rear panel- Conserves desktop space

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super-fast response rate and safety features that take electrical testing to a higher level. The DT4252 is a digital multimeter designed specifically for general purpose testing, with ±0.3% DC V accuracy, direct current input and wide 40 Hz to 1 kHz bandwidth.

• ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Measure up to 10A with direct input.
• USB communications function supports PC measurements (optional)
• Dual display lets you check voltage and frequency simultaneously

• Real 6 1/2 bit reading resolution
• Front and back 2 sets of multimeter input interface, measure can a key switch
• Up to 30,000 rdgs/s reading
• Graph display function, trend drawing function to paperless record testing data, statistic information and histogram
• Double display measurement function, display 2 kinds of signal parameters at the same time.
• True RMS AC voltage and AC current measure
• 0.1μV resolution, easy to use, parameters can be settled easily
• Support dual display, Chinese and English menu
• Built in help system, convenient access to information
• 13 kinds of measure functions: DC Voltage, AC Voltage, DC current, AC current, 2 line resistance, 4 line resistance, capacitance, diode, connectivity, frequency, period, current range can be 10A
• 4.3 inch 64K LCD
• Safety standards: CAT II 300 V
• Support standard SCPI Remote control command, upper computer software, Compatible with the latest mainstream multimeter command set
• Configuration interface: USB Device, USB Host,

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket types. The DT4282 is a high-precision 60,000 count digital multimeter with direct 10A input and all the functions and features required for advanced testing in laboratories and R&D.

• 60000 count, 5-digit display, high-resolution measurements
• ±0.025% DC V basic accuracy, wide 20 Hz to 100 kHz AC V frequency characteristics
• Measure up to 10 A with direct input (DT4282 only)
• Low-pass filter cuts high harmonics
• Dual display lets you check voltage and frequency simultaneously

The Hioki 3030-10 is an analog multimeter that measures voltage, current and resistance, with robust construction that withstands a 1 meter drop onto a concrete floor.

• Drop proof design withstands drop onto a concrete floor from a height of 1 meter.
• LED check, Battery check support

The Hioki DT4200 Digital Multimeter Series consists of a diverse array of meters ranging from professional to industrial to pocket meters, delivering a super-fast response rate and safety features that take electrical testing to a higher level. The Hioki DT4224 is a pocket-sized digital multimeter featuring an innovative circuit-breaker false trip prevention function to enhance testing safety, capacitance and diode testing functions, ideal for all general electrical jobs.

• Achieving a high level of safety in a compact body and lightweight design
• Robust design capable of withstanding a drop from a height of 1 m
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Circuit breaker false trip prevention function helps avoid accidents resulting from breakers that mistakenly trip due to incorrect input.
• Test leads conveniently wrap around the back.
• Broad -10°C (14°F) to 65°C (149°F) operating temperature range
• More convenient function: Resistance, Capacitance measurement and diode testing (DT4224)
• ±0.5% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Display backlight

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super-fast response rate and safety features that take electrical testing to a higher level. The DT4221 is a pocket-sized digital multimeter designed specifically for electrical work requiring optimal safety, with ±0.5% DC V accuracy and wide 40 Hz to 1 kHz AC V bandwidth.

• Achieving a high level of safety in a compact body and lightweight design
• Robust design capable of withstanding a drop from a height of 1 m
• Broad -10°C to 50°C (14°F to 122°F) operating temperature range
• Resistance and diode testing functions omitted by design in pursuit of added safety (DT4221)
• ±0.5% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Voltage detection function
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)

• Display 2000 counts
• - Auto & Manual Ranging
• - Auto Power Off
• - Diode Open Voltage 1.5V
• - Maximum Value Hold
• - Data Hold
• - Low Battery Display
• - Continuity Buzzer <50±20Ω
• - Logic Level Test
• - Retractable Tip for Safe Storage

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super-fast response rate and safety features that take electrical testing to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature, and clamp sensor testing, and wide 40 Hz to 1 kHz bandwidth.

• Ideal for measuring currents ranging from instrumentation signals (4 to 20 mA) to flame currents (μA) with built in high-sensitivity current ranges (DT4253)
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Dual display lets you check voltage and frequency simultaneously

DC Voltage range              600.0 mV to 1000 V, 5 ranges, Basic accuracy: ±0.15% rdg. ±2 dgt.

AC Voltage range              6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz

Basic accuracy 40 Hz - 500 Hz: ±0.9% rdg. ±3 dgt. (True RMS, crest factor 3 or less)

DC + AC Voltage range    6.000 V to 1000 V, 4 ranges, Frequency characteristics: DC, 40 Hz to 1 kHz

Basic accuracy DC, 40 Hz - 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS, crest factor 3 or less)

LoZ V     600.0 V, 1 range, Frequency characteristics: DC, 40 Hz to 1 kHz.

Basic accuracy DC, 40 Hz - 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS, crest factor 3 or less)

Resistance range               600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7% rdg. ±3 dgt.

DC Current range              600.0 mA to 10.00 A, 3 ranges

Basic accuracy: ±0.5% rdg. ±3 dgt.

AC Current range              600.0 mA to 10.00 A, 3 ranges

Basic accuracy 40 Hz - 500 Hz: ±1.4% rdg. ±3 dgt. (True RMS, crest factor 3 or less)

Frequency characteristics: 40 Hz to 1 kHz

AC Current range (use with Clamp on probes)      10.00 A to 1000 A, 7 ranges

Basic accuracy 40 Hz - 500 Hz: Add the Clamp on probe accuracy to ±0.9% rdg. ±3 dgt.

(True RMS, crest factor 3 or less)

Capacitance range            1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9% rdg. ±5 dgt.

Continuity Check              Continuity threshold ON: 25 Ω, Continuity threshold OFF : 245 Ω, Response time: 0.5 ms or more

Diode test            Open terminal voltage: 2.0 V or less, Testing current: 0.2 mA or less, Threshold of forward voltage: 0.15 V to 1.8 V

Display  Main and sub displays: 4-digits LCD, max. 6000 digits (excluding frequency measurement), bar-graph.

Display refresh rates        5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 times/s)

Power supply     LR6 (AA) alkaline batteries × 3, Continuous operating time: 130 hr. (without Z3210 installed), 70 hr. (with Z3210 installed and using wireless communications)

Dimensions and mass     87 mm (3.43 in.) W × 185 mm (7.28 in.) H × 47 mm (1.85 in.) D, 480 g (16.9 oz.) (with test leads holder and batteries)

Included accessories       Test Lead L9300 × 1, Instruction Manual × 1, LR6 (AA) alkaline battery × 3, Operating Precautions ×1

Warranty: 3 years

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super-fast response rate and safety features that take electrical testing to a higher level. The DT4255 is a digital multimeter designed for maximum safety with voltage measurement terminals that are protected by a fuse.

• Prevents short-circuit accidents with a fast-blow fuse and current-limiting resistor (DT4255)
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Prevents accidents with clamp-on sensor-based current measurement (DT4255)
• Broad -25°C to 65°C (-13°F to 149°F) operating temperature range (DT4255)
• Voltage detection function
• Dual display lets you check voltage and frequency simultaneously

rofessional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The Hioki DT4223 is a pocket-sized digital multimeter featuring an innovating circuit-breaker false trip prevention function to enhance testing safety and a built-in voltage detector, ideal for electrical inspections.

• Achieving a high level of safety in a compact body and lightweight design
• Robust design capable of withstanding a drop from a height of 1 m
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Circuit breaker false trip prevention function helps avoid accidents resulting from breakers that mistakenly trip due to incorrect input.
• Test leads conveniently wrap around the back.
• Broad -10°C (14°F) to 65°C (149°F) operating temperature range
• Resistance measurement and voltage detection function (DT4223)
• ±0.5% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Display backlight

RISHABH 610 digital multimeter is suited for universal, general applications in the electrical and electronics fields, as well as in radio and television service, training and education. It is of especially pocket size design and thus fit into pocket. The protective cover, which is provided as standard equipment, can be opened at an angle for convenient reading from the workbench.

• Direct and alternating voltages from 10 μV ... 1000V
• Direct and alternating currents from 10μA ... 10.00A
• Resistance from 0.1Ω ...60.00M Ω with zero correction
• Logic Frequencies from 0.01Hz ... 1MHz Approx
• Diode measurement and continuity testing
• Hold measurement.
• Relative measurement
• Duty cycle (%) measurement
• Temperature measurement with K type Thermocouple

The UT197PV is a rugged, high-precision true RMS handheld multimeter designed for industrial use. Key features include an IP67 rating for dust and water resistance, and the ability to withstand drops from up to 5 meters. This multimeter is ideal for harsh outdoor environments, such as damp or sandy conditions and extreme cold. It is widely used in power engineering, HVAC, new energy and environmental protection etc.

• True RMS measurement with 6,000 count
• AC/DC voltage: 1000V
• Power measurement: 1500KVA(AC) & 2500KVA (DC)
• VFD output measurement
• External clamp: AC/DC 1000A (Optional: UT-CS07)
• Display count: IP67 & 5m Drop Protection
• Overvoltage category: CAT IV 1000V & CAT III 1500V
• Working environment: -40 °C ~ 55 °C
• Bluetooth APP supported

The MOTWANEs multipurpose tester Model MIRT-61 is a Versatile, battery operated Digital insulation tester with true RMS industrial grade multimeter features best suited for industrial preventive maintenance. With test voltage range up to 1KV , highest insulation resistance range of 6G Ohm and multi featured function of RMS multimeter (i.e. AC/DC 1000V) ; makes it a superior offering for Industry and Service segment. It is designed predominantly for low voltage insulation resistance testing in maintenance and services, which involves the applications like Cables/Wires, Rotating Machines, LT transformers, Switchgears and Industrial installations. It is designed to suit the extreme environment conditions. Save your operating cost and test more with this single box design rather buying two different products.

• -6000 Count Digital Multimeter with Insulation Tester
• -Dual LCD Display with amber backlit

• Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR.
• 3400 counts with bargraph display.
• Pocket size and heavy duty design
• Continuity buzzerBuzzer sounds below 30±10Ω (Continuity buzzer works on 340Ω range only)
• Frequency(AC A) 3.4/10kHz ±0.1%rdg±1dgt (AC V) 3.4/34/300kHz ±0.1%rdg±1dgt (Input sensitivity Current: more than 15A, Voltage: more than 30V)

The RS PRO RS14 digital multimeter (DMM) is a handheld tool which can measure voltage, electrical current and resistance with diode and continuity check. There is also a “hold” function available in the compact design making it very user-friendly. The multimeter is also CAT III rated for 600V. This battery-powered device is great for continuity and portability. A robust, double-moulded, plastic housing provides ultimate protection from harsh environments. Included with the multimeter itself are integral test leads, 9V battery, type K temperature probe and a user manual.

Features:

• Compact and handheld
• Digital 2000 count LCD display
• 3-year warranty
• 104 x 70 x 48mm dimension
• Continuity tester
• Functions measured: AC and DC Current, AC and DC Voltage, Resistance, Temperature Measurement
• Diode test
• Auto power off
• Battery Type 1 x 9V
• Low battery indication

Automatic, Autoranging and Intelligent: - This multimeter is very easy to use as compared to a traditional multimeter as it is automatic and intelligent. You don’t have to set parameters beforehand.

• 4000 Counts ,True RMS ,NCV & Line
• Measures AC/DC Voltage, Resistance, Frequency, Continuity

MASTECH MS833 Pocket Size Digital LCD Multimeter This is a most economical best choice practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator and overload protection.

Features:

• 1999 Display counts
• DC Voltage: 200mV±(0.5%+2) 2V/20V/200V±(1.0%+5) 600V(1.0%+7)
• AC Voltage: 200V/600V ±(1.5%+10)
• DC Current: 200μA/2mA/20mA ±(1.0%+7) 200mA±(1.2%+5)

Features

• New Launch- 2000V AC/DC Multimeter by MetroQ- Ideal for solar installers
• New type holster, streamline design.
• Large LCD makes the reading clearly.
• Metallic screen board with stronger antimagnetic and anti- interferential function.
• No power off under natural operation.
• Full function protection, anti-high voltage circuit design.

The 3244-60 is a card-style digital multimeter for general electrical maintenance and testing, and includes gold-plated test leads for better contact. Insulated test pin sleeves also prevent short-circuits.

• Better contact test leads with 15 mm gold-plated tip pin.
• Overload protection to 500 V at resistance or continuity functions
• Only 9.5 mm (0.37 in) thick and 60 g (2.1 oz) in weight
• Full auto-ranging function and automatic power saving function

Analog Multimeter - True RMS reading for ACV/ACA testing

- It's and innovated accurate, shock-proof handheld instrument with robust protective holster alongside and the adjustable back tilt device with hook-up design.
- Power On Light Indicator With Auto Power Off.
- Heavy ABS Housing plus compact protective holster alongside

• True RMS for better accuracy when measuring distorted waveforms
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection
• Max Hold, Data Hold and Auto power off
• Complete with test leads and 9V battery

• True RMS DMM with 8 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 20A max Current
• Type K temperature measurements
• Data hold, Relative, Auto power off
• Large-digit backlit LCD
• Complete with CAT3 test leads, tilt stand, protective holster, velcro hanging strap, Type K bead wire temp probe and 9V battery