Atal Tools

UPO1054 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 50MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

UPO1104 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 100MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

UPO1000CS series is a multi-function, cost-effective digital phosphor oscilloscope. It adopts parallel digital signal processing technology, which greatly improves the data processing speed and waveform capture rate. The original Ultra Phosphor technology can present the cumulative effect of the tested signal as a multi-layered afterglow. Compared with traditional digital storage oscilloscopes, the persistence of digital phosphor oscilloscopes can present three-dimensional waveform data of amplitude, time and signal intensity. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and runt signals. 

• BANDWIDTH:  100MHz
• CHANNELS:  2
• REAL-TIME SAMPLE RATE:  1GSa/s
• MAX. MEMORY DEPTH:  56Mpts
• WAVEFORM CAPTURE RATE:  500,000wfms/s

The CEX+ provides a richer trigger mode, 34 kinds of automatic parameter measurement and common mathematical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and can easily cope with the measurement needs of complex signals.

• Dual Channel, 100 Mhz
• Real Time Sample Rate: 1GSa/s
• Display range 8div x16 div and has a new Autoset strategy ,which can easily cope with complex test scenarios
• HD color LCD screen display
• Multi-language optional ,With 9 languages, it can meet the needs of users in more countries
• Multi-frequency square wave optional,ouput standard square wave 10Hz, 100Hz, 1kHz,10kHz optional
• Various parameter measurement and waveform recording functions

New Launch

UNI-T CEX+ series provides a richer trigger mode,34 kinds of automatic parameter measurement and common mathmatical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and easily cope with the measurement needs of complex signals.

• Dual Channel, 200 Mhz
• Real Time Sample Rate: 1GSa/s
• Display range 8div x16 div and has a new Autoset strategy ,which can easily cope with complex test scenarios
• HD color LCD screen display
• Multi-language optional ,With 9 languages, it can meet the needs of users in more countries
• Multi-frequency square wave optional,ouput standard square wave 10Hz, 100Hz, 1kHz,10kHz optional
• Various parameter measurement and waveform recording functions

2 channel DSO with 300 MHz bandwidth, 2.5 GSa/s sample rate, 40 MSa memory depth with a resolution of 800 x 600 pixel.

• 300MHz Bandwidth，2.5GS/s sample rate
• 8-bit high resolution ADC
• 40M record length max 70,000 wfms/s waveform refresh rate
• low back ground noise
• 8 inch 800 x 600 high resolution LCD
• SCPI, and LabVIEW supported
• multi- trigger, and bus decoding function (Optional)

Creative New Look

• ultra-thin body-design, less space accommodation
• multi-interface integration - USB host, USB device, USB port for PictBridge, LAN, AUX, and more
• VGA port - better solution for video expansion, and teaching demonstration

• Oscilloscope + multimeter + waveform generator, multifunction in one
• Oscilloscope: Dual Channel (2),  Bandwidth: 70 Mhz
• 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
• 18650 lithium battery, comprehensive power consumption ≤3W, can work continuously for about 6 hours
• USB Type-C interface, support power bank, support PC software connection
• Self-calibration function
• SCPI supported, facilitate secondary development
• Includes: USB cable, Set of test leads, Probe, BNC - alligator clips cable, Power adapter, Carrying pouch

The HDS272S is a portable dual-channel oscilloscope that can also be used as a multimeter and a function generator. The meter sports a 3.5" high-contrast colour display suitable for outdoor use and it runs on a pair of 18650 batteries, good for up to 6 hours of continuous use. You can hook up the meter to a PC host with USB-C to use it with Owon's desktop software, control it via SCPI or to use it with a power bank.

Signals can be recorded and stored internally, good for up to 8k data points. Waveforms can also be stored as image or CSV, to be exported via USB to a PC host.

Besides being an oscilloscope, it independently acts as a fully featured 20,000 count True-RMS multimeter. It has the capability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed comfortably large on the display.

The HDS242 is a portable dual-channel oscilloscope that can also be used as a multimeter and a function generator. The meter sports a 3.5" high-contrast colour display suitable for outdoor use and it runs on a pair of 18650 batteries, good for up to 6 hours of continuous use. You can hook up the meter to a PC host with USB-C to use it with Owon's desktop software, control it via SCPI or to use it with a power bank.
Besides being an oscilloscope, it independently acts as a fully featured 20,000 count True-RMS multimeter. It has the capability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed comfortably large on the display.

Oscilloscope + multimeter

Oscilloscope: Dual Channel (2),  Bandwidth: 40 Mhz

3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use

18650 lithium battery, comprehensive power consumption ≤3W, can work continuously for about 6 hours

USB Type-C interface, support power bank, support PC software connection

Self-calibration function

SCPI supported, facilitate secondary development

Includes: USB cable, Set of test leads, Probe, BNC - alligator clips cable, Power adapter, Carrying pouch

Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter and 6-digit hardware frequency indicator functions; 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defence, embedded systems, computers, research and education.

2 channels which are respectively controlled by independent knobs.

100MHZ analog channel bandwidth

Sampling rate up to 1 GSa/s

8M memory depth

Vertical range 2mV/div ~ 10V/div

Built-in 1 CH 25MHz waveform generator (DSO2D10, DSO2D15)

Vertical resolution: 8bit

Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC

BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN

Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures.

A 3-digit digital voltage meter and a 6-digit hardware frequency indicator

32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation etc.

2 sets of digital voltmeters

Support threshold testing, free measurements within the screen.

Abundant SCPI remote command control

USB Host/Device.

Oscilloscope + signal generator + multimeter +data logger +frequency counter + decoder. Support Li-on battery (Optional) to implement floating test.  

The Owon XDS3204E oscilloscope is an oscilloscope with a magnificent price-quality ratio. The 3204E features a large display, good sampling rate and a large memory depth.

Because the scope features good specifications, such as the low Noisefloor, this device is suitable for many applications. With the free decoding options, many prototcols can easily be decoded. Furthermore, color grading is possible for clearer analysing of signals.

• 200MHz Bandwidth 1GS/s sample rate, 4 Channels
• 8-bit high resolution ADC
• 70,000 wfms/s waveform refresh rate
• low back ground noise
• 8 inch 800 x 600 high resolution LCD, optional multi-touch screen, more user-friendly operation experience
• SCPI, and LabVIEW supported
• multi- trigger, and bus decoding function
• multi-interface integration - USB host, USB device, USB port for PictBridge, LAN, AUX, and VGA

UPO1000CS series is a multi-function, cost-effective digital phosphor oscilloscope. It adopts parallel digital signal processing technology, which greatly improves the data processing speed and waveform capture rate. The original Ultra Phosphor technology can present the cumulative effect of the tested signal as a multi-layered afterglow. Compared with traditional digital storage oscilloscopes, the persistence of digital phosphor oscilloscopes can present three-dimensional waveform data of amplitude, time and signal intensity. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and runt signals. 

• Bandwidth:  200MHz
• Channels:  2
• Real-Time Sample Rate:  1GSa/s
• MAX. Memory Depth:  56Mpts
• Waveform Capture Rate:  500,000wfms/s

OWON SDS1104 100MHz 4 Channel Digital Storage Oscilloscope, with up to 1GS/s real-time sample rates, maximum 100MHz bandwidth.

• Bandwidth : 100MHz
• 4-Channel
• Sample rate : 1GS/s
• Ultra-thin body
• 7 inch high resolution LCD
• SCPI, and LabVIEW supported

• Oscilloscope + multimeter + waveform generator, multifunction in one
• 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
• 18650 lithium battery, can work continuously for 3-6 hours
• USB Type-C interface, support power bank, support PC software connection
• Self-calibration function
• SCPI supported, facilitate secondary development
• 200Mhz, 1 GS/a, 2 Channel

MSO1000HD series high-resolution oscilloscope has the maximum bandwidth of 250 MHz, the maximum sample rate of 2.5 GSa/s, and is equipped with 4 analog channels and 16 digital channels, with the memory depth of up to 100 Mpts. MSO1000HD series adopts exclusive Ultra Phosphor 3.0 technology, achieving the waveform capture rate of up to 200,000 wfms/s, with 256 levels of gray temperature colors, and features an innovative digital trigger system with high trigger sensitivity and low jitter

12-Bit High-Resolution ADC

• 4096-level quantization (16× finer than 8-bit ADCs) enables precise waveform detail restoration, ideal for capturing subtle signal variations.

High-Speed Signal Capture

• Bandwidth: 250 MHz
• Sample Rate: 2.5 GSa/s (single channel)
• Deep Memory: 100 Mpts/CH for long-term signal recording without data loss

Ultra Phosphor 3.0 Technology

• 200,000 wfms/s capture rate with low-jitter digital trigger system for real-time anomaly detection.

Compact Mixed-Channel Design

• Analog channels + 16 digital channels (MSO models) for concurrent analog signal analysis and digital protocol debugging.

Features: 

• 4CH oscilloscope & function/Arb. waveform generator.
• The performance of this model could even better than the performance of benchtop oscilloscope. It has 4 independent analog channels, 1GSa/s real-time sampling rate, 2mV-10V/DIV input sensitivity, and 250MHz bandwidth.
• Function/Arbitrary Waveform Generator: 200MSa/s DDS, 12bits of vertical resolution, built-in variety of standard waveforms, arbitrary waveform easy to edit, which is convenient to reappear sensor and other irregular signal.
• Pass/fail test, resourceful trigger function, dynamic cursor tracking, waveform record and replay function. The operation interface is similar to banchtop oscilloscope, easy to operate with high cost performance.
• USB2.0 Interface, plug and play device.
• Good mechanical design with small size which is easy for carrying. The outer case is made by the same material with iPad - Anodised aluminium. It has great heat resistance and abrasive resistance with beautiful appearance. The hardness of aluminium alloy surface is greatly improved.
• Fit for the portable computers, table PC, and repairing/fixing of production line. Suitable for business trip use.
• Software support: Windows10, Windows 8, Windows 7
• The waveform data could be output to EXCEL,BMP,JPG as time and voltage category.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• Provide secondary development library DLL; Provide Labview\VB\VC developing examples.

Standard accessories:

• BNC to BNC cable - 1PC
• alligator clip line - 2PCs
• passive probe - 2PCs
• USB cable - 1PC
• CD burned with Labview/VC/VB/QT development examples - 1PC

ToolWorld is Authorized Hantek Distributor 

UPO2000HD series high-resolution oscilloscope has the maximum bandwidth of 200 MHz, the maximum sampling rate of 2.5 GSa/s, with the memory depth of up to 100 Mpts. UPO2000HD series adopts exclusive Ultra Phosphor 3.0 technology, achieving the waveform capture rate of up to 1,000,000 wfms/s, with 256 levels of gray temperature colors, and features an innovative digital trigger system with high trigger sensitivity and low jitter. Multiple advanced measurement and analysis functions and rich trigger decoding types. Can be widely used in communication, aerospace, education and many other industries and fields.

• Bandwidth 200MHz
• Analaog Channels:4
• Real time sample rate 2.5GSa/s 
• 2D Infinite Zoom
• 56 types: Measurement, Statistics, Trend Graphs
• Protocol Decoding And Triggering
• Versatile Testing Equipment

• The Owon XDS3064E oscilloscope is the 60MHz version in the XDS3004E series oscilloscopes
• OWON XDS3000-E Series 4CH 8 Bit Panel ADC
• 60MHz，1GS/s sample rate
• 40M record length max 70,000 wfms/s waveform refresh rate
• low back ground noise
• 8 inch 800 x 600 high resolution LCD,
• SCPI, and LabVIEW supported
• multi- trigger, and bus decoding function (Optional)

The DHO800 series is RIGOL's high-performance economical digital oscilloscope. Though compact in design, it has superior performance. It features a capture rate up to 1,000,000 wfms/s (in UltraAcquire Mode), 25 Mpts memory depth, 12 bits resolution, and low noise. The DHO800 series is a brand new economical digital oscilloscope designed for the vast mainstream digital oscilloscope market to meet their design, debugging, and test demands.

• Analog channel bandwidth: 100 MHz
• 4 analog channels
• up to 12-bit vertical resolution
• Real-time sample rate up to 1.25 GSa/s
• Memory Depth up to 25 Mpts
• Vertical sensitivity range: 500 μV/div to 10 V/div
• Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
• 7" (1024x600) capacitive multi-touch screen
• Supports Web Control interface

MSO3000HD series high-resolution oscilloscope has the maximum bandwidth of 500 MHz, the maximum Sample rate of 2.5 GSa/s, and is equipped with 4 analog channels and 16 digital channels, with the memory depth of up to 500 Mpts. MSO3000HD series adopts exclusive Ultra Phosphor 3.0 technology, achieving the waveform capture rate of up to 1,500,000 wfms/s, with 256 levels of gray temperature colours, and features an innovative digital trigger system with high trigger sensitivity and low jitter.

• Analog channel bandwidth: 500 MHz
• Real-time sample rate 2.5 GSa/s
• 12-bit vertical resolution
• 4 analog channels, 16 digital channels
• Memory depth of up to 500 Mpts
• Waveform capture rate is up to 500,000 wfms/s (sequence mode: 1,500,000 wfms/s)
• 9 instrument functions: digital oscilloscope, logic analyzer, function/arbitrary waveform generator, spectrum analyzer, digital voltmeter, frequency meter, protocol analyzer, bode plot analyzer and power analyzer.
• Uninterrupted hardware real-time waveform recording and analysis of up to 125,000 frames
• Enhanced FFT of up to 4M points
• Supports ERES (enhanced resolution) of up to 4-bit
• 54 kinds of parameter measurements. adds histogram and line graph display
• Multi-Windows display
• Multi-channel 7-digit hardware frequency meter
• DVM multi-channel RMS measurement: DC, AC RMS and DC+ACRMS
• Protocol triggering and decoding function:RS232/UART, I2C, SPI, CAN, CAN-FD, LIN, Flex Ray, Audio, MIL-STD-1553B, Manchester, SENT, ARINC429
• Zone trigger for capturing sporadic signals and observing complicated signals.
• 10.1-inch 1280x800 HD capacitive multi-touch screen
• Built-in Webserver

Model MSO3054HD

Bandwidth 500MHz

Channels 4

Sample Rate 1.25GSa/s

Memory Depth 500Mpts

Max. Waveform capture rate ≥500,000 wfms/s;

                                                            ≥1,500,000 wfms/s (sequence mode)

Vertical resolution 12-bit (ERES is enabled with a maximum of 16-bit)

Time Base Scale 200 MHz (2 ns/div to 1 ks/div)

Input impedance (1 MΩ±2%) || (18 pF±3 pF)50 Ω± 1.5%

Input impedance (digital) (101 kΩ±1%)||(9 pF ± 1 pF)

Waveform record 125,000 frames

Serial protocol analysis RS232/UART, I2C, SPI, CAN, CAN-FD, LIN, FlexRay, AUDIO, MIL-STD-1553B, Manchester, SENT, ARINC429

Auto measurements 54 kinds of parameter, simultaneously display 27 kinds of parameter measurement

Arbitrary waveform generator 2 CH, 50 MHz , 250 MSa/s

Warranty: 3 Years

 Bandwidth: 30 MHz
- Sample rate: 250 MS/s
- 8 inch high definition TFT display
- Ultra-thin body
- Channels: 2+1 (External), 30 Mhz

The Owon SDS1202 Digital Storage Oscilloscope features 2 channels, up to 1GS/s real-time sample rates, maximum 200MHz bandwidth. The SDS1202 offers a 7-inch color LCD screen with 800x600 resolution. The SDS1202 has a ultra-thin body at only 70mm deep for portability, and it offers a 10K record length per channel of memory.
Bandwidth: 200 MHz
2-Channel
Sample rate: 1GS/s

MSO3000HD series high-resolution oscilloscope has the maximum bandwidth of 500 MHz, the maximum Sample rate of 2.5 GSa/s, and is equipped with 4 analog channels and 16 digital channels, with the memory depth of up to 500 Mpts. MSO3000HD series adopts exclusive Ultra Phosphor 3.0 technology, achieving the waveform capture rate of up to 1,500,000 wfms/s, with 256 levels of gray temperature colours, and features an innovative digital trigger system with high trigger sensitivity and low jitter.

Analog channel bandwidth: 200 MHz

Real-time sample rate 2.5 GSa/s

12-bit vertical resolution

4 analog channels, 16 digital channels

Memory depth of up to 500 Mpts

Waveform capture rate is up to 500,000 wfms/s (sequence mode: 1,500,000 wfms/s)

9 instrument functions: digital oscilloscope, logic analyzer, function/arbitrary waveform generator, spectrum analyzer, digital voltmeter, frequency meter, protocol analyzer, bode plot analyzer and power analyzer.

Uninterrupted hardware real-time waveform recording and analysis of up to 125,000 frames

Enhanced FFT of up to 4M points

Supports ERES (enhanced resolution) of up to 4-bit

54 kinds of parameter measurements. adds histogram and line graph display

Multi-Windows display

Multi-channel 7-digit hardware frequency meter

DVM multi-channel RMS measurement: DC, AC RMS and DC+ACRMS

Protocol triggering and decoding function:RS232/UART, I2C, SPI, CAN, CAN-FD, LIN, Flex Ray, Audio, MIL-STD-1553B, Manchester, SENT, ARINC429

Zone trigger for capturing sporadic signals and observing complicated signals.

10.1-inch 1280x800 HD capacitive multi-touch screen

Built-in Webserver

Model MSO3024HD
Bandwidth 200MHz
Channels 4
Sample Rate 1.25GSa/s
Memory Depth 500Mpts
Max. Waveform capture rate ≥500,000 wfms/s;
                                                            ≥1,500,000 wfms/s (sequence mode)
Vertical resolution 12-bit (ERES is enabled with a maximum of 16-bit)
Time Base Scale 200 MHz (2 ns/div to 1 ks/div)
Input impedance (1 MΩ±2%) || (18 pF±3 pF)50 Ω± 1.5%
Input impedance (digital) (101 kΩ±1%)||(9 pF ± 1 pF)
Waveform record 125,000 frames
Serial protocol analysis RS232/UART, I2C, SPI, CAN, CAN-FD, LIN, FlexRay, AUDIO, MIL-STD-1553B, Manchester, SENT, ARINC429
Auto measurements 54 kinds of parameter, simultaneously display 27 kinds of parameter measurement
Arbitrary waveform generator 2 CH, 50 MHz , 250 MSa/s

Warranty: 3 years

Creative USB isolation function fulfills direct device- powering via USB port, and supports floating measurement (isolation voltage upto 1000V), making the operation more user-friendly, assuring safer T&M environment, and decreasing the interference to micro signal- measuring to the minimum.
Band Width: 25MHz;
Analog Bandwidth: 25MHz
Sample Rate: 100MS/s

The Owon Wave Rambler is USB2.0-powered and connected and features a large 5kSa buffer and fast 100MSa/s sampling to capture high-speed signals. A built-in x1/x10 switch allows higher voltage signals up to 50V to be displayed (vertical sensitivity is 5mV/div - 5V/div). The horizontal scale can be set between 5ns/div and 100s/div. Control of the Wave Rambler is by means of a unique trackball built into the probe top for easy use – no need to take hands-off and adjust the PC!

HTC DSO- 10100S Digital Storage Oscilloscope a two in one oscilloscope and signal generator, the real-time sampling rate is 1GSa / s and with 100MHz analog bandwidth, with 7 inch TFT LCD display screen, the built-in high-voltage protection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope burning accident caused by the probe not moving to 10x gear, built in DDS function signal generator.

• Built in DDS signal generator, support 12 kinds of function signal..
• Bandwidth: 100MHz , Number of channels: 2 channels, Maximum real time sampling rate: 1GSa/s
• Fully fit 7 inch 800 * 480 resolution color TFT LCD
• High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V.
• Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
• Cursor measurement function: it is convenient to manually measure the period and frequency and voltage.
• Complete triggering function (single, normal, automatic), and at any time, the waveform display (STOP function) is frozen.
• Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.
• Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
• Equipped with a USB interface

The DHO800 series is RIGOL's high-performance economical digital oscilloscope. Though compact in design, it has superior performance. It features a capture rate up to 1,000,000 wfms/s (in UltraAcquire Mode), 25 Mpts memory depth, 12 bits resolution, and low noise. The DHO800 series is a brand new economical digital oscilloscope designed for the vast mainstream digital oscilloscope market to meet their design, debugging, and test demands.

• Analog channel bandwidth: 70 MHz
• 4 analog channels
• up to 12-bit vertical resolution
• Real-time sample rate up to 1.25 GSa/s
• Memory Depth up to 25 Mpts
• Vertical sensitivity range: 500 μV/div to 10 V/div
• Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
• 7" (1024x600) capacitive multi-touch screen
• Supports Web Control interface

Owon 100 MHz.,2 CH, VGA, Coloured LCD 8

• Bandwidth: 100MHz
• Sample rate: 1GS/s
• 10M record length for each channel
• Multi-function : auto-scale, Pass / Fail, and current-measuring
• LAN remote control
• Supported SCPI and labVIEW
• Smart design with easy portability
• Large 8 inch 800 x 600 pixels display
• VGA output for external display capability

• Dual-channel Oscilloscope+25MHz Signal Generator
• 120MHz bandwidth
• Dual-channel independent 1GS/s real-time sampling rate
• 20M memory depth
• Support 30 Automatic Waveform Measurements
• 6-digit High-precision Frequency Counter
• FFT Spectrum Analysis
• Communicate with PC via USB Device interface, support SCPI and LabVIEW functions, provide free computer software and some programming development demos, so you can remotely control the instrument and conduct secondary development.
• 7-inch TFT LCD display
• Includes 10X Oscilloscope Probes- 2, & BNC Cable

ToolWorld is MetroQ-Owon Authorized Distributor

1. Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.
2. Intelligent charging control: Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy.
3. Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.
4. Large-capacity lithium battery power supply: 18650 replaceable lithium battery power system, free from replace battery.
5. 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone.
6. AUTO one-key test: Magic tool and essential function for test newbie.
7. Volume small, one hand holding: The 45 degree suspension bracket design provide you a work station anywhere anytime;One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective.
8. Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free.Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately.One-click switching its Chinese and English language menu.
9. Color LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify.Minimalist keyboard design simplify operation, convenient to use.
10. Unibody casing: fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble.
11. Self-calibration function: free from level drift after long time unused.Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test.
12. Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms. sine up to 25MHz.
13. Function of video help:scan code on back of machine to get help of video course.The PC software supports windows7/8/10 32-bit and 64-bit.

OWON SDS1104 100MHz 4 Channel Digital Storage Oscilloscope, with up to 1GS/s real-time sample rates, maximum 100MHz bandwidth.

• Bandwidth : 100MHz
• 4-Channel
• Sample rate : 1GS/s
• Ultra-thin body
• 7 inch high resolution LCD
• SCPI, and LabVIEW supported

• Including 7 measurement functions in one: oscilloscope, waveform generator, multimeter, FFT spectrum analyzer, frequency counter, protocol analysis, amplitude-frequency curve analysis.
• 500 MHz oscilloscope bandwidth, 5 GSa/s sample rate, Dual Channel
• 10.4-inch multi-touch screen
• In-Bluit Multimeter and multimeter data logger function
• Standard 400MB memory depth
• 600,000 wfms/s refresh rate, easy to capture exceptional and low probability events.
• Advanced function calculation function
• Standard 50M single-channel arbitrary waveform generator
• Waveform cloning function, quickly generate captured waveforms.
• A variety of triggers and bus decodes.
• Standard Bode plot for loop test analysis.
• Multi-interface design: USB Host & Device, LAN, VGA; USB Host supports standard SCPI.

The new generation of TO1000 series multi-functional full touch screen oscilloscope has a thin body, light weight and is easy to carry；Unique hanging design, hands-free, anti-falling and anti-seismic, sturdy, and durable; It integrates oscilloscope, multimeter, signal generator and spectrum analyser; Built in super large capacity battery, long endurance, support fast charging, and abundant power.

• Multi touch large screen, resolution up to 800 * 480, friendly and easy-to-use UI, good interaction experience.
• Standard configuration of 4 or 2-channel oscilloscope, maximum bandwidth of 200MHz, maximum sampling rate of 1GSa/s,
• Deep Memory: 8M large storage.
• Provide high precision multimeter with data recording, storage, trend chart, statistical analysis, and other functions.
• A variety of arbitrary waveforms are built into the signal generator, and the highest output frequency is 25MHz.
• One key waveform storage, convenient and fast.
• Suspension foot design, multi angle adjustment, anti-falling and anti-seismic, put it on the go.
• Built in super large capacity lithium battery, full power, long endurance, standby for up to half a year.
• The standard 18W charger supports type-C fast charging and can also share a set of charging equipment with mobile phones.

The UPO3000E series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T's original Ultra Phosphor 2.0 technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster. It is an oscilloscope designed for general design / debugging / testing needs in many fields, such as communication, semiconductor, computer, instrumentation, industrial electronics, consumer electronics, automotive electronics, on-site maintenance, R & D / education, etc. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and low wave signals.

• Channels:2
• Bandwidth:350MHz
• Real time sample rate: 2.5GSa/s
• Brand new interactive experience
• Ultra-high capture rate
• Maximum memory depth up to 250Mpts
• Rich trigger function
• Full memory hardware decoding
• Area trigger
• AWG Function Arbitrary Waveform Generator
• Bode plot

The UTD2000CL+ Series is a market-proven economical digital oscilloscope.  This series of digital oscilloscopes has excellent technical indicators and can meet the main needs of basic testing. The front panel design is clear and intuitive,fully in line with the traditional instrument usage habits, and is convenient for users to operate

• Bandwidth: 100MHz
• Measurement channel: 2 analog channels
• Real-time sampling rate: 500MS/S
• Storage depth: 64kpts
• Waveform capture rate: 5,000wfms/s

•  
  • Bandwidth: 200 MHz,
  • Channels: 2 +1 (External)
  • Record Length: 10M
  • Sample Rate: 2GS/S
  • Display: 8”color LCD, 800 x 600 pixels, VGA Port
  • Delivery including 2 probes, USB cable, pc software, power cable and manual.
 200 MHz, 2 GSa/s 

 

 

The colorful 8" (20.3 cm) TFT LCD panel with the resolution of 800 × 600 allows an excellent readability of the wave, especially in regards to high data volume or many waves covered reciprocally.

The SDS8202 offers a bandwidth of 200 MHz, a sample rate of 2 GSa/s in dual channel and VGA Interface

Delivery including 2 probes, a USB cable, PC software, a power adapter and a user manual.

The Owon SDS1052 Digital Storage Oscilloscope features 2 channels, up to 500MS/s real-time sample rates, maximum 50MHz bandwidth. The SDS1052 offers a 7-inch color LCD screen with 800x600 resolution. The SDS1052 has a ultra-thin body at only 70mm deep for portability, and it offers a 10K record length per channel of memory.

The Owon XDS3064A Digital storage oscilloscope features an 12-bit high vertical resolution, restoring the waveform detail fully. The XDS3064A has a 60 MHz bandwidth, 1 GS/s sample rate and 40M record length. The XDS3062A comes standard with a 8 inch 800 x 600 high resolution LCD display. Product Features: 12-bit Resolution Vertical Resolution, restoring the waveform detail fully 60 MHz bandwidth, 1 GS/s sample rate Low background noise, vertical sensitivity in 1 mV/div - 10 V/div Based upon the 3rd generation X-visual platform Can Function as n-in-1 : data logger, multimeter, waveform generator, and digital storage oscilloscope with Optional Configurations 8 inch 800 x 600 high resolution LCD.

• 60 MHz bandwidth, 1 GS/s sample rate
• Low background noise, vertical sensitivity in 1 mV/div - 10 V/div
• Based upon the 3rd generation X-visual platform
• Can Function as n-in-1 : data logger, multimeter, waveform generator, and digital storage oscilloscope with Optional Configurations

The Owon SDS1022 Digital Storage Oscilloscope features 2 channels, up to 100MS/s real-time sample rates, maximum 20MHz bandwidth. The SDS1022 offers a 7-inch color LCD screen with 800x600 resolution. The SDS1022 has a ultra-thin body at only 70mm deep for portability, and it offers a 10K record length per channel of memory.
Bandwidth: 20 MHz
2-Channel
Sample rate: 100MS/s