Atal Tools

• The body weighs only 132g and is 16mm thick, which is light and portable and can be fitted into a pocket
• The slim and thin jaw of only 10mm can easily clamp onto tightly packed wires
• 400A AC range, 0.01A high resolution
• Tests voltage, resistance and continuity
• Tests current frequency and voltage frequency
• Tests capacitance and diodes

• The body weighs only 132g and is 16mm thick, which is light and portable and can be fitted into a pocket
• The slim and thin jaw of only 10mm can easily clamp onto tightly packed wires
• 400A AC range, 0.01A high resolution
• Tests voltage, resistance and continuity
• Tests current frequency and voltage frequency
• Tests capacitance and diodes

• The body weighs only 132g and is 16mm thick, which is light and portable and can be fitted into a pocket
• The slim and thin jaw of only 10mm can easily clamp onto tightly packed wires
• 600A AC range, 0.01A high resolution
• Tests voltage, resistance and continuity
• Tests current frequency and voltage frequency
• Tests capacitance and diodes
• Backlight

• The body weighs only 132g and is 16mm thick, which is light and portable and can be fitted into a pocket
• The slim and thin jaw of only 10mm can easily clamp onto tightly packed wires
• 600A AC range, 0.01A high resolution
• Tests voltage, resistance and continuity
• Tests current frequency and voltage frequency
• Tests capacitance and diodes
• Backlight

• The body weighs only 154g and is 16mm thick, which is light and portable and can be put into a pocket
• The slim and thin jaw of only 10mm can easily fit into tightly packed wires
• 600A AC/DC range (D model), 0.01A high resolution
• Tests voltage, resistance and continuity
• Tests current frequency and voltage frequency
• Tests capacitance and diodes
• Backlight

• The body weighs only 154g and is 16mm thick, which is light and portable and can be put into a pocket
• The slim and thin jaw of only 10mm can easily fit into tightly packed wires
• 1000A AC/DC (E model), 0.01A high resolution
• Tests voltage, resistance and continuity
• Tests current frequency and voltage frequency
• Tests capacitance and diodes
• Backlight

The Fluke 302+ comes with all the rugged, reliable and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 400 A, a large 30 mm jaw opening and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

- 400 A ac current measurement
- Cat IV 300V / CAT III 600V safety rated
- 30 mm jaw size for numerous applications
- Resistance range of 40 k
- Slim, ergonomic design is easy to carry and simple to use
- Easy to read backlight display

The Fluke 305 come with all the rugged, reliable and accurate features you have come to trust, in a small, ergonomic design. The innovative body design offers a more compact tool to meet your needs. With features of AC current measurements up to 999 A, a large 30 mm jaw opening and CAT IV 300 V/CAT III 600 V safety rating, you get an easy-to-use tool that handles your everyday electrical maintenance needs.

• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications
• Slim, ergonomic design is easy to carry and simple to use
• Easy to read backlight display

The Fluke 323 clamp meter is a good basic troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. It's designed to perform in the toughest environments and provide noise-free, reliable results, so you can trust it to help you confidently diagnose problems almost anywhere. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments.

The Fluke 323 comes with a two-year warranty and a soft carrying case.

Features:

• Features slim, ergonomic design for measuring in tight cable compartments
• Presents measurements on a large, easy-to-read display
• Hold function captures a reading on the display
• Features a CAT III 600 V, CAT IV 300 V safety rating
• Comes with a two-year warranty and soft carrying case

Fluke 317 clamp meter is designed based on detailed research into the specific requirements of electrical engineers. The small clamp meter head and lightweight, compact body make it ideal for use in confined spaces. The 40A range low current measurement (0.01A resolution) design is unique and allows users to accurately measure small currents. At the same time, the clamp meter also has functions such as accurate, True RMS measurements, maximum/minimum values, zeroing, background light display, display protection and is a powerful tool in carrying out daily maintenance and installations.

• The unique new features of the 40 milli-amps measurement
• High-precision current measurement 0.01A
• High-resolution, 1.6% high-precision measurements. (many engineers take small measurements more often than large current measurements)
• The new clamp head is narrow and the body is compact and portable, making it ideal for use in confined spaces
• Alternating/ current (AC)/direct current (DC) testing
• Min/Max (minimum value / maximum value) feature on both current and voltage modes
• New zeroing feature* - sets the display to zero to perform (DC) testing
• Large back light screen, convenient viewing
• Screen ‘Hold’ function to hold measurement results on the screen
• Automatic off function prolongs battery life and ensures the instrument’s continued availability.
• Continuity : ≤30 Ω
• Safety Rating : CE EN/IEC 61010-1 and IEC 61010-2-032
• Calibrated and Tested Completely by Hand
• AC Voltage and AC Current RMS Measurement are set from 5% to 100 %

Portable, accurate and True RMS Clamp Meter. Unique 40 milli-amps measurement precision testing functionality

• The unique new features of the 40 milli-amps
• measurement High-precision electric current measurement--0.01A
• The new frequency test feature* offers precise measurement of VFD pulse width modulation Output signal frequency
• Current frequency measurement
• Precision down to 0.01A and 0.1V
• 1000A AC/DC current measurement 
• 600V AC/DC voltage measurement
• 4000Ω resistance measurement
• Continuity beeper
• Auto off function enhances battery life, meaning the instrument can work when you need it screen store ‘hold’ function for capturing a measurement result on the screen

• Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance
• Performs AC and DC current measurements to 600 A, and AC and DC voltage measurements to 1000 V
• Measures AC current to 2500 A AC with optional iFlex flexible current probe
• Measures resistance to 6000 Ω with continuity detection

• Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance
• Performs AC and DC current measurements to 600 A, and AC and DC voltage measurements to 1000 V
• Measures AC current to 2500 A AC with optional iFlex flexible current probe
• Measures resistance to 6000 Ω with continuity detection

• Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
• Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording

- Resistance: 40 M ohm
- AC Current: 10 A
- Counts: 4000
- DC Voltage: 1000 V
- DC Current: 10 A
- AC Voltage:1000 V
- Fuse protection for current inputs 440 mA, 1000 V Fast Fuse, 11A, 1000V Fast Fuse
- Size (H x W x L) 183 x 91 x 49.5 mm
- Weight 455 g
- IP rating IP 40
- Safety IEC 61010-1, IEC61010-2-030 CAT III 600 V, CAT II 1000 V, Pollution Degree 2

Warranty: As per Flukes warranty policy- 1 Year

• True-RMS digital multimeter with the features professional technicians prefer
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
• Measures AC and DC voltage to 1000 V
• Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Safety rated CAT III 1000 V, CAT IV 600 V

The Fluke 393 FC CAT III 1500 V True-rms Solar Clamp Meter with iFlex is designed for solar photovoltaic (PV) installation technicians and maintenance professionals who work in high voltage DC environments: PV arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp meter will measure up to 1500 V DC and 1000 V AC with test leads, and up to 999.9 A DC or AC through the clamp jaw. The included iFlex flexible current probe extends AC current measurements up to 2500 A. The 393 has a thin jaw, giving you access to cables in crowded combiner boxes. Plus, the test leads are designed with your work in mind, and are also rated to CAT III 1500 V DC.
Key functions of the solar clamp meter:

IP54 rated, ideal for work outdoors including PV panel testing

DC power measurement, showing readings in kVA

Audio Polarity indicator helps prevent accidental miswires

Visual Continuity provides a bright green light in the display, ideal when working in dark and noisy environments

Logging and reporting of test results via Fluke Connect software

When measuring ac current the included iFlex flexible current probe gives you unparalleled access to cable is tight spaces.  The iFlex probe can be twisted through extremely small spaces and provide accurate current measurements.

• Quickly measure distance, calculate area / volume / pythagoras
• Auto level and height
• Built to withstand rainy or dusty conditions: 1-meter drop tested with rated IP54 (Fluke 404E / 406E), IP65 (Fluke 405 / 408 / 410),
• Electronic angle display, auxiliary level measurement
• Up to 100 sets of data storage
• The battery life up to 5000 single measurements
• Automatically power off after 3 minutes of inactivity
• Universal tripod interface, easy to use
• Type-C charging port, strong endurance
• 2-inch HD display, clear viewing in full sunlight

• Audible and visual alarm for incorrect connections
• Test leads with fines tips for circuit board testing
• Simple interface to wake meter from sleep mode by activating any buttons
• Voltage: 6000-count reading
• Capacitance range: 2000uF
• Safety rating: CATIII 600V
• Frequency and temperature measurement

• iFlex flexible current probe (sold separately) expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
• CAT IV 600 V, CAT III 1000 V
• Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
• Ergonomic design fits in your hand and can be used while wearing personal protective equipment
• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
• Three-year warranty
• Soft carrying case

Fluke 317 clamp meter is designed based on detailed research into the specific requirements of electrical engineers. The small clamp meter head and lightweight, compact body make it ideal for use in confined spaces. The 40A range low current measurement (0.01A resolution) design is unique and allows users to accurately measure small currents. At the same time, the clamp meter also has functions such as accurate, True RMS measurements, maximum/minimum values, zeroing, background light display, display protection and is a powerful tool in carrying out daily maintenance and installations.

• The unique new features of the 40 milli-amps measurement
• High-precision current measurement 0.01A
• High-resolution, 1.6% high-precision measurements. (many engineers take small measurements more often than large current measurements)
• The new clamp head is narrow and the body is compact and portable, making it ideal for use in confined spaces
• Alternating/ current (AC)/direct current (DC) testing
• Min/Max (minimum value / maximum value) feature on both current and voltage modes
• New zeroing feature* - sets the display to zero to perform (DC) testing
• Large back light screen, convenient viewing
• Screen ‘Hold’ function to hold measurement results on the screen
• Automatic off function prolongs battery life and ensures the instrument’s continued availability.
• Continuity : ≤30 Ω
• Safety Rating : CE EN/IEC 61010-1 and IEC 61010-2-032
• Calibrated and Tested Completely by Hand
• AC Voltage and AC Current RMS Measurement are set from 5% to 100 %

• Audible and visual alarm for incorrect connections
• Test leads with fines tips for circuit board testing
• Simple interface to wake meter from sleep mode by activating any buttons
• Voltage: 6000-count reading
• Capacitance range: 2000uF
• Safety rating: CATIII 600V

• USB interface for direct reading PDF report, no software required
• 32,000 sets of data for long time logging
• Minimum logging interval of 10 seconds, instantaneous logging of rapid environment changes
• FDA compliant, data traceable
• Multiple formats for data export and reporting
• 1 meter drop test, IP54 ingress protection
• Compact and light, easy to record and read data at any time

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

Other useful capabilities:

• Measures AC/DC voltage from 0.1 V to 600 V
• Includes auto-discharge of capacitive voltage for added user protection
• Provides lo-ohms earth-bond continuity (200 mA)
• Simplifies repetitive or hard-to-reach testing with the remote test probe
• Saves battery power with auto power off
• Presents results on a large, backlit display
• Features CAT IV 600 V overvoltage category rating
• Comes with remote probe, test leads, test probes, alligator clips, and one-year warranty
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests

•  Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
• - Offers true-RMS AC voltage and current for measuring non-linear signals
• - Captures intermittents as short as 250 µS
• - Safety rated CAT III 1000 V, CAT IV 600 V
• - Includes a built-in thermometer and temperature probe
• - Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• - Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• - Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• - Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
• - True RMS AC voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives

Fluke 115 comes with a white large LED backlight to work in poorly lit areas with resistance and Min/Max/Average to record signal fluctuations.

Designed for use in multiple environments, the Fluke 941 light meter is easy to use and provides clear data display for a variety of applications.

The Fluke 941 is a handheld luminometer than can measure visible light sent from a variety of light sources, to include fluorescent, metal halide, high pressure sodium, or incandescent lamps. With an extension cord to the light meter and separate display the Fluke 941 provides a handheld tool to accurately measure light in multiple environments. The Fluke 941 is a portable tool that measures light up to 20,000 fc of lux with an accuracy of .01 fc/lux.

• Measure in lux or foot-candles, with one button to switch between display options
• Measuring range up to 20,000 lux or foot candles
• Data hold to freeze reading on the digital display
• Min/max ability to show high and low readings
• Auto power off to save battery life
• Includes protective sensor cap

• Single unit combining a test lead and probe, measuring 48 inches (1.22 meters) in length
• PVC-insulated probes, ensuring secure and accurate measurements
• CAT II 1000 V, 10 A rated, When the protective caps are placed on the leads, the rating jump up to CAT IV 600 V, CAT III 1000 V
• see compatible products below

The Fluke TL75 Hard Point Test Lead Set is PVC insulated with right-angle shrouded banana plugs.

• One pair (red, black) of comfort grip probes
• 48" (1.22 m) PVC insulated test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT II 1000 V, , 10 A rating
• CAT IV 600 V, CAT III 1000 V only with protective cap
• CSA listed

• Quickly measure distance, calculate area / volume / pythagoras
• Auto level and height
• Built to withstand rainy or dusty conditions: 1-meter drop tested with rated IP54 (Fluke 404E / 406E), IP65 (Fluke 405 / 408 / 410),
• Electronic angle display, auxiliary level measurement
• Up to 100 sets of data storage
• The battery life up to 5000 single measurements
• Automatically power off after 3 minutes of inactivity

• Expands the Measurement Range to 2500 A AC while Providing Increased Display Flexibility, Ability to Measure Awkward Sized Conductors and Improved Wire Access
• CAT IV 600 V, CAT III 1000 V
• 7.5 mm Coil Diameter Allows Measurement in Tight Spaces
• Ergonomic Design Allows Easy Operation with One Hand
• 1.8 m (6 ft) Cable
• Three-Year Warranty

• Non-contact voltage detection from 90 to 1000 V AC
• Innovative 'Battery Check' ensures battery is in good condition*
• Integrated clip design, optimized for pocket storage

• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience

• Standard and optional external probes are available for limited space
• Accuracy of ±0.5 °C and ± 3% RH, to meet industrial grade testing requirements
• 99 sets of stored data, easy to review (Fluke 972B only)
• Auto logging mode for up to 8 hours of automatic temperature and humidity monitoring (Fluke 972B only)
• Comfortable grip and ergonomic design
• Reinforced sensor protective cover for worry-free operation

• Quickly measure distance, calculate area / volume / pythagoras
• Auto level and height
• Built to withstand rainy or dusty conditions: 1-meter drop tested with rated IP54
• Electronic angle display, auxiliary level measurement
• Up to 100 sets of data storage
• The battery life up to 5000 single measurements
• Automatically power off after 3 minutes of inactivity
• Universal tripod interface, easy to use
• Type-C charging port, strong endurance
• 2-inch HD display, clear viewing in full sunlight