Atal Tools

FNIRSI 1014D is a 100 MHz bandwidth dual-channel oscilloscope with a built-in waveform generator. The oscilloscope features a high real-time sampling rate of 1 GS/s, 240 kB memory, a large 7-inch display with 800 × 480 resolution, and advanced features for capturing, analyzing, and recording measurement results. Besides, the device features high voltage protection, which ensures safe operation with signals up to 400 V. Built-in function generator generates 14 types of signals, voltage resolution is 8 bit, voltage 5 Vpeak-peak. FNIRSI 1014D is equipped with a USB interface to connect to the computer. This oscilloscope is designed for diagnostics and tuning of radio and electronic equipment.
Compact and functional oscilloscope.
Large 7-inch TFT display (800 × 480 pixels).
High voltage protection: built-in module provides protection up to 400 V.
Built-in 1 GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
Automatic measurement function.
Roll function.
Lissajous figures graphic display function.
Screen brightness adjustment function.

• Newly Version: The 2C53T is an upgraded version of the 2C23T, which improves the measuring range and adds math operation，cursor measurement，persistence mode，XY mode features.
• 2 Channel Oscilloscope: 50 MHz bandwidth, 250MSa/s sampling rate, 1Kpts record depth, automatic measurement function, max voltage 400V, vertical sensitivity 10mV/div-10V/div , support waveform image storage and export.
• 4.5-Digit 20000 Counts Multimeter: AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-19.99MΩ, Capacitance: 0-99.99mF, Continuity Measurement. Multi-function meter for professionals, schools and hobbyists.
• Signal Generator: The maximum waveform output frequency can reach 50kHz and a step of 1Hz, and can output 13 waveforms.
• Save function: one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.
• Excellent Design: The Oscilloscope adopts FPGA + MCU + ADC hardware architecture, built-in high-voltage protection module, adopts 2.8 inch LCD display, built-in 3000mAh Li-ion battery, standby time up to 6H, Type-C interface supports 5V/1A charging.

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability

The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz.

With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals.

Maximum measured voltage signal is 400 V.

Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments

 Functions (Component Tester)

Automatically analyse NEC protocol infrared code.

Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

 Functions (Signal Generator)

The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.

The FNIRSI DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500 MS/s and an analog bandwidth of 180 MHz. The measurement results are displayed on the high-contrast 2.8-inch IPS full-view LCD screen with digital fluorescence technology. 

• 2-ch handheld oscilloscope & DDS signal generator
• 180 MHz bandwidth
• 500 MS/s sampling rate
• 20 MHz signal generator
• Innovative digital trigger system
• Cursor measurement function
• 5 mV sensitivity
• 50000 wfm/s waveform refresh rate
• 2.8" IPS full-vision high-definition display
• Built-in 4.2 V/3000 mAh lithium battery
• Automatic shutdown setting
• High-voltage anti-burning protection

• 96 W input (DC)
• 65 W PD power
• OLED display
• Constant temperature & fast heating
• CNC metal integral molding
• Smart safety anti-scald
• Mini pocket size
• Ergonomic design
• Aluminum material
• Left/right hand switch
• Efficient heat radiation
• Inductive sleep

【Faster sampling speed】FNIRSI DSO152 mini oscilloscope has a real-time sampling rate of 2.5MS/s and a 200KHz bandwidth. The 10x probe can measure up to 800VPP, which is equivalent to 280V AC. Voltages up to ±400V can be measured.

【Professional Designed 】Features with full trigger function (AUTO/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. 2.8-inch high-definition LCD display screen, a resolution of 320*240, Type-C interface supports data transmission and charging support interface to update firmware directly.

【Portable Mini Oscilloscope】Pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time. Applicable to the maintenance industry and R&D education industry. The highly practical oscilloscope can meet your daily testing needs.

【Easy Measuring】Equipped with efficient one-key AUTO setting of all parameters; the measured waveform can be displayed without cumbersome adjustment. Long press the AUTO button to quickly calibrate the baseline, fast measurement of waveforms, improve work efficiency.

【Longer Battery Life】Automotive oscilloscope has a built-in 1000mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. At the same time, it is equipped with a type-c charging cable, which can also be used while charging, which is very convenient.

• DMT-99 is FNIRSI's newly launched 10000 count intelligent digital multimeter, with a wider measurement range and higher resolution, helping you measure more accurate values.
• It can accurately measure AC/DC voltage, AC/DC current, and 10A current, and can also be used to test conductivity, capacitance, frequency, resistance, diode, temperature, NCV, live wire, etc.
• Suitable for various fields of electronic maintenance such as engineering, laboratories, cars, and home appliances.
• It is equipped with a 2.4-inch full-color TFT display screen with a resolution of up to 240 * 320, a new UI interface design, and the first monitoring mode function, enriching your user experience and making operation more convenient in various scenarios.

S1 digital multimeter with display counts 9999. It can measure up to 1000V AC/DC. It is equipped with a digital display that provides accurate readings and allows users to perform measurements with ease.

Diode Test

Resistance Test

Frequency Test

Capacitance Test

Temperature Test

Ac/dc Voltage Test

On-off Buzzer 

Ncv Voltage Test

Zero/fire Wire Check

Package includes:
1 x Digital Multimeter,1 x Test Cable,1 x Temperature probe,1 x USB Cable

• [UNIQUE DATA STORAGE] FNIRSI IR40 laser distance meter can store measurement data in the Phone app, the stored data can reach thousands of sets. The virtual measurement function enables real-time measurement. The drawing measurement function can directly mark the measurement data on the real picture.
• [HIGH ACCURACY & UNIT SWITCH] FNIRSI IR40 laser distance meter adopts laser precision technology, accuracy ups to ±1/16inch, and the measuring distance is extended to 135 feet; it can be switched between M/Ft/In, freely adjustable.
• [MULTIPLE MEASUREMENT FEATURES] Area, distance, volume, continuous measurement, Pythagoras. Low battery indication, manually delete data. Auto shut down after 300s without any operation to save power.
• [TYPE-C RECHARGEABLE] FNIRSI IR40 is a rechargeable mini laser distance meter. Universal Type-C charging port, you can share the charging cable for cell phones and other 3C electronic products, as well as not need to frequently replace the battery. With a full charge, measure up to 3000 times.
• [WIDELY USED] FNIRSI IR40 laser distance meter is suitable for use in libraries, classrooms and other quiet places, the laser measure is ideal for home, construction, and industry, especially in large areas such as rooms, apartments, buildings, real estate, factories, warehouses, etc.

• 96 W input (DC)
• 65 W PD power
• OLED display
• Constant temperature & fast heating
• CNC metal integral molding
• Smart safety anti-scald
• Mini pocket size
• Ergonomic design
• Aluminum material
• Left/right hand switch
• Efficient heat radiation
• Inductive sleep

• 2.8-inch HD LCD display with 320*240 Resolution
• Portable Pocket Oscilloscope with Signal Generator
• Lightweight, mini-sized, assembled.
• Faster sampling: 5MS/s, 1MHz bandwidth.
• Versatile triggering: single, normal, auto.
• User-friendly: One-button setup.
• Extended battery: 1000mAh, 4 hours.
• Multi-functionality: 10KHz Sine Wave Generator.

Universal: This oscilloscope probe is suitable for most oscilloscopes on the market, such as bnc and other electronic products.

High quality construction: The oscilloscope probe is made of high-quality materials, which is durable and has a long service life.

Portable and lightweight: The oscilloscope probe is small and lightweight, easy to carry and store. it can be placed in a pocket or bag for easy carrying.

• High-Performance Output: 30V, 5A, 150W variable DC power with 0.01V, 0.001A precision, CC/CV modes, and <20mV ripple to protect sensitive electronics.
• Upgraded Features: Supports PC, QC, and DC inputs with programmable outputs and 6 preset voltage/current settings.
• Versatile Connections: Compatible with 4mm banana plugs, U-shaped terminals, and copper wires for various equipment.
• Comprehensive Protection: 8 safety mechanisms including overvoltage, current, short circuit, and overheating protection.
• HD Display: 2.8-inch IPS screen with 90° flip, numerical and curve displays for easy monitoring.
• Compact & Portable: Small, space-saving design for use in labs, repairs, and DIY projects.

• DC-6MHz
• DC-100MHz
• Scope Clip Probe

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability
The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz.
With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals.
Maximum measured voltage signal is 400 V.
Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments
 Functions (Component Tester)
Automatically analyse NEC protocol infrared code.
Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.
 Functions (Signal Generator)
The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.

FNIRSI HS-02A Smart Soldering Iron-A model, High-Power 100W with Quick Charging PD/QC Protocol Wide Temperature Range 180-842°F Featuring Adaptive Power Efficiency 0.96 IPS HD Colour Screen

Features:

• High-Power & Fast Charging: The HS-02 Smart Soldering Iron provides a robust 100W power supply and supports PD/QC protocol for quick and efficient charging.
• Wide Temperature Range: With a temperature range of 100-450℃ (180-842°F), it caters to diverse soldering needs.
• Advanced Display: The device features a 0.96” IPS HD color screen for detailed and easy-to-understand performance monitoring.
• Energy Efficient: It boasts an adaptive power adjusting feature, which ensures efficient and safe power output.
• Convenience & Durability: Designed with a CNC metal shell, this device offers durability and a handy one-click standby mode.

Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.

Highly Performance: 7 inches, 800 * 480 resolution, bright colors, and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.

Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc

Easily Measuring: Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.

Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency, and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.

• ≤0.2% Error
• Engineering quantity / signal value
• Real-Time curve record view
• 2.4"TFT Full Colour HD display with backlight
• Designed for industrial control industry
• stable appearance design.
• Supports voltage, current, frequency, thermocouple, and other signal modes for both output and input.
• Provides support for independent 24V power supply
• Offers programming mode for customization
• Facilitates real-time curve visualization
• Allows for historical data recording
• Supports MODBUS communication protocol
• Enables seamless firmware upgrades
• Incorporates other powerful functions for enhanced functionality

• Free sensitivity
• Temperature and humidity detection
• Light alarm
• Mobile app intelligent linkage
• Conforms to International Committee IEC651TYPE2 and American International Standard ANSIS1.4TYPE2 standards
• Measurement range: 30dB-130dB
• Accuracy: ±1.5dB
• A-weighting responses, with fast and slow response rate selection
• "Automatic shutdown in 15 minutes" function
• Dual mode switching with adjustable sensitivity
• Diligently designed with attention to detail

The Fnirsi FNB58 USB-tester can measure real-time voltage and current for USB-A, USB-C and Micro USB. It also measures ripple and power delivery.

Moreover, it offers protocol detection and measured data can be exported to a mobile device via Bluetooth. It offers a user-friendly 2.0" TFT LCD that displays the required information with 6 digits.

The FNB48P USB tester with Bluetooth is a high-reliability, high-safety USB voltage, and current detection meter and a mobile communication terminal fast charging trigger. It has a 1.77-inch TFT LCD display, integrated USB-A, Micro-USB, and Type-C interface. Use a dedicated 16-bit ADC, PD protocol physical chip. It can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks; measure the charging power of mobile phones and the input and output of mobile power supplies; test the fast charging protocol of chargers.

USB Tester with LCD Display
FNIRSI FNB48P USB tester has a 1.77-inch TFT LCD display, integrated USB-A, Micro-USB, and Type-C interface. It is a high-reliability, high-safety USB voltage, and current detection meter and a mobile communication terminal fast charging trigger. The gravity sensor enables you to automatically switch the display direction.

Multifunction USB Digital Tester
Uses external 16-bit ADC, PD protocol physical chip, this USB tester can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks. Also, it can monitor the voltage, current, power, resistance, capacity, temperature, D+/D- voltage, etc, and test the fast charging protocol of chargers.

Parameter Detection and Recording
It has the highest six-digit display of voltage, current, and power, and the highest resolution is 0.00001 (V/A/W). 10 sets of switchable capacity, power, and time statistics. 1 set of voltage and current curve records, maximum support 9 hours. Support low-speed waveform (voltage, current, D+/D-) drawing, 2sps->100sps sampling rate. Support high-speed ripple (voltage, AC coupling)drawing, up to 3.2Msps sampling rate.

More Detection Functions
FNB48P also has many functions, including the internal resistance measurement of the wire by the differential pressure method, E-Marker cable chip reading, DASH cable data reading, the record of startup time, onboard temperature measurement, PD monitor, etc.

The FNB48P USB tester is a high-reliability, high-safety USB voltage, and current detection meter and a mobile communication terminal fast charging trigger. It has a 1.77-inch TFT LCD display, integrated USB-A, Micro-USB, and Type-C interface. Use a dedicated 16-bit ADC, PD protocol physical chip. It can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks; measure the charging power of mobile phones and the input and output of mobile power supplies; test the fast charging protocol of chargers.

USB Tester with LCD Display
FNIRSI FNB48P USB tester has a 1.77-inch TFT LCD display, integrated USB-A, Micro-USB, and Type-C interface. It is a high-reliability, high-safety USB voltage, and current detection meter and a mobile communication terminal fast charging trigger. The gravity sensor enables you to automatically switch the display direction.

Multifunction USB Digital Tester
Uses external 16-bit ADC, PD protocol physical chip, this USB tester can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks. Also, it can monitor the voltage, current, power, resistance, capacity, temperature, D+/D- voltage, etc, and test the fast charging protocol of chargers.

Parameter Detection and Recording
It has the highest six-digit display of voltage, current, and power, and the highest resolution is 0.00001 (V/A/W). 10 sets of switchable capacity, power, and time statistics. 1 set of voltage and current curve records, maximum support 9 hours. Support low-speed waveform (voltage, current, D+/D-) drawing, 2sps->100sps sampling rate. Support high-speed ripple (voltage, AC coupling)drawing, up to 3.2Msps sampling rate.

More Detection Functions
FNB48P also has many functions, including the internal resistance measurement of the wire by the differential pressure method, E-Marker cable chip reading, DASH cable data reading, the record of startup time, onboard temperature measurement, PD monitor, etc.

• Temperature/Refractive Index/Sugar Content Measurement
• One-Key Zeroing
• Automatic Shutdown
• Data Recording
• Brightness Adjustment
• Single Measurement Repeatability

It features a full-color, ultra-wide viewing angle TFT LCD display and integrates multiple interfaces, including USB-A and Type-C male and female connectors, ensuring broad compatibility.

Utilizing an external 16-bit ADC chip, it offers high measurement accuracy.

This device can measure the power supply or consumption of USB interfaces, phone chargers, USB drives, and other products.

It can also measure phone charging power, and the input and output conditions of power banks, and perform quick charge protocol testing for chargers.

Portable intelligent colour screen spot welding machine

Welding thickness: 0.1-0.25mm

Charging/Discharging: 5V/2.1A

Mash welder+ mobile power bank

1200A Maximum welding current

Intelligent anti-burning

Multiple security protection reminders

Capacity: 5000mAh

High quality A-grade battery cells

Welding materials: Nickel sheet, iron sheet, stainless steel

Special spot-welding pen

1200A current discharge

Gear: 4 combination adjustment gear

The Fnirsi 2C23T oscilloscope is an affordable handheld oscilloscope, function generator and multimeter. This device combines multiple practical functions while keeping a slim and portable design.

• Bandwidth of 10MHz, a sample rate of 50MS/s and 2 channels.
• In addition, it has a waveform saving feature, allowing for storage and later analysis of data.
• The function generator has a single channel, a frequency range of 1Hz-2MHz and an amplitude of 0.1-3.3V. The function generator can also output 7 different waveforms.
• The multimeter has 10.000 counts and supports AC/DC power and current measurements.
• The 2C23T has a 2.8" LCD color screen and is powered by a built-in 3000mAh battery, offering up to 6 hours of continuous use in standby mode

CTG-20 is a coating thickness gauge, designed to deliver unparalleled accuracy and reliability for your coating measurement needs in automotive, aerospace, marine, or industrial manufacturing industry. It can measure the thickness of non-magnetic coatings and paintings on the surface of magnetic or non-magnetic materials such as steel, iron and aluminium etc.

• Rapid measurement 0.5S
• Auto detect ferrous substrates and non-ferrous substrates
• support continuous measuring
• Languages: English/Chinese

• Expect with the conventional signal input and output functions.
• Signals displayed as physical or engineering values, corresponding linearly.
• Voltage and current have automatic output function, it can choose a single rise, three modes of single drop and cycle.
• Four preset groups for quick output adjustment.
• With input to output conversion, voltage conversion active current mode, passive mode and current conversion voltage mode.
• The output has a custom function, the upper and lower output limits can be set arbitrarily.
• Displays input and output signal trends with adjustable sampling.
• Automatically adjusts curve within specified range over time.
• Voltage input diagram, current input diagram, the frame rate is 10 frames.
• PWM output can set frequency and duty cycle respectively.
• Real-time curve: Real-time observation of changes in voltage and current
• It is powered by a large-capacity lithium battery and is charged with a Type-c interface (5V).The capacity of the lithium battery is 3000mHA, fully charged in 4-6 hours, standby time is 26 hours, the using time varies, based on the usage(It can be 8-10 hours with 20mA continuous output)
• The high-definition TFT color LCD screen makes the reading more eye-catching. The resolution is 240*320.Low power consumption, Maximum power consumption: 0.32W
• FNIRSI SG-003A communicates via RS485 with configuration software or PLC.
• Firmware upgrade via USB emulated U disk.

• FNIRSI-C1 Features: Monitoring voltage: 4~24V Monitor voltage resolution: 0.00001V Monitoring voltage accuracy: ±(0.2‰+2) Monitoring current: 0~6.5A Display current resolution: 0.00001A Monitoring current accuracy: ±(0.5‰+2) Display power: 0~130W
• Display current resolution: 0.00001W Monitoring current accuracy: ±(0.5‰+2) Load equivalent resistance: 0~9999.9Ω Load equivalent resistance resolution: 0.0001Ω Load equivalent resistance accuracy: ±(0.5‰+2)
• Capacity: 0~9999.99Ah Use energy: 0~9999.99Wh Cable resistance: 0~9999.9Ω D+/D- voltage: 0~3.3V D+/D- voltage resolution: 0.001V D+/D- voltage accuracy: ±(1.0%+2) Equipment temperature: ℃/℉ Package size: 50*25*8mm / 1.97* 0.98 * 0.31in Package weight: 47g / 1.66oz

The Fnirsi FNB58 USB-tester with Bluetooth can measure real-time voltage and current for USB-A, USB-C and Micro USB. It also measures ripple and power delivery.

Moreover, it offers protocol detection and measured data can be exported to a mobile device via Bluetooth. It offers a user-friendly 2.0" TFT LCD that displays the required information with 6 digits.

✦ Voltage Internal Resistance Battery Tester: FNIRSI battery tester can automatically test internal resistance and voltage value at the same time. The measured value can be used to determine whether the battery quality has decreased.

✦ TFT HD Color Display: The display adopts advanced color HD technology and excellent layout. Compared with traditional monochrome displays, it can present test results more clearly and vividly, greatly enhancing the user's measurement experience.

✦ Accurate Measurement: Adopts customized Kelvin four-wire connection method to avoid wire and contact resistance and improve measurement accuracy. Users can also manually adjust the voltage and resistance range.

✦ Wide Application Range: Suitable for all kinds of batteries. Car battery tester, household battery. It supports historical records and export data tables of historical measurements. View 8 sets of voltage and resistance values to batch select batteries.

✦ LED Display Handheld Meter: The resistance measurement range is up to 200Ω and the voltage measurement range is up to 100 V. The device must not be used with a DC voltage higher than 100V. Do not apply AC voltage under any circumstances.

✦ Versatile Tester: FNIRSI LCR-P1 measures transistors, capacitors, resistors, inductors, diodes, MOSFETs, and batteries.

✦ User-Friendly Design: Features a replaceable patch seat, 1.44-inch color screen, 300mAh battery, and Type-C charging/data port.

✦ Anti-Burn Protection: Automatically discharges undischarged capacitors to prevent accidental damage.

✦ Infrared Analysis: Supports NEC infrared protocol analysis for remote control debugging and maintenance.

✦ Smart Identification: Automatically detects component pins, parameters, and specifications for faster work efficiency.

Highlights
✦ LCR Tweezer Tester: The FNIRSI LCR-ST1 is a portable and multifunctional instrument for measuring resistance, capacitance, inductance, and diodes.
✦ Measurement Range: 3 test frequencies – 100 Hz, 1 kHz, 10 kHz. 2 test voltage - 0.3 Vrms, 0.6 Vrms. R: 10 mΩ to 10 MΩ / C: 1 pF to 22 mF / L:1 uH to 10 H.
✦ Multiple functions: D, Z, Q, R, ESR value reading. Auto recognition of elecronic components, primary and secondary parameters display. 1.14'' HD color display, is easy to operation.
✦ Data Storage and Export: The LCR tester automatically saves test records and allows data transfer to a PC via Excel.
✦ 2 Types of Tweezer Heads: With pointed head and hook head, it is convenient to test different types of products. It is equipped with a storage bag and can be charged via a data cable.

• Monitoring voltage: 4~24V Monitor voltage resolution: 0.00001V Monitoring voltage accuracy: ± (0.2‰+2) Monitoring current: 0~6.5A Display current resolution: 0.00001A Monitoring current accuracy: ± (0.5‰+2) Display power: 0~130W
• Display current resolution: 0.00001W Monitoring current accuracy: ± (0.5‰+2) Load equivalent resistance: 0~9999.9Ω Load equivalent resistance resolution: 0.0001Ω Load equivalent resistance accuracy: ± (0.5‰+2)
• Capacity: 0~9999.99Ah Use energy: 0~9999.99Wh Cable resistance: 0~9999.9Ω D+/D- voltage: 0~3.3V D+/D- voltage resolution: 0.001V D+/D- voltage accuracy: ± (1.0%+2) Equipment temperature: ℃/℉ Package size: 50*25*8mm / 1.97* 0.98 * 0.31in Package weight: 47g / 1.66oz
• Bluetooth app contro

• FNIRSI-TP10 is a voltage tester with the function of Non-Contact AC Voltage Sensing, used in zero fire wire detection.
• The voltage tester is built in battery and could supply a torch while the testing scene is out of power. It also has a red-light indicator, which could help you lock the testing aim.
• As a voltage indicator, it can withstand high voltage range: default: 48-1000V, High Sensitivity: 12-1000V, testing frequency is between 50/60Hz.
• The voltage tester has two alarm methods in sound and light indication. It is light, easily carried and would be a convenient and practical assistor for electrical groups.