Atal Tools

The new generation of TO1000 series multi-functional full touch screen oscilloscope has a thin body, light weight and is easy to carry；Unique hanging design, hands-free, anti-falling and anti-seismic, sturdy, and durable; It integrates oscilloscope, multimeter, signal generator and spectrum analyser; Built in super large capacity battery, long endurance, support fast charging, and abundant power.

• Multi touch large screen, resolution up to 800 * 480, friendly and easy-to-use UI, good interaction experience.
• Standard configuration of 4 or 2-channel oscilloscope, maximum bandwidth of 200MHz, maximum sampling rate of 1GSa/s,
• Deep Memory: 8M large storage.
• Provide high precision multimeter with data recording, storage, trend chart, statistical analysis, and other functions.
• A variety of arbitrary waveforms are built into the signal generator, and the highest output frequency is 25MHz.
• One key waveform storage, convenient and fast.
• Suspension foot design, multi angle adjustment, anti-falling and anti-seismic, put it on the go.
• Built in super large capacity lithium battery, full power, long endurance, standby for up to half a year.
• The standard 18W charger supports type-C fast charging and can also share a set of charging equipment with mobile phones.

Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter and 6-digit hardware frequency indicator functions; 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defense, embedded systems, computers, research and education.

An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 4 in 1 multifunction tester: Automotive Diagnostic, oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand; The suspending stand was designed to support multi-angle adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standby two months; High-definition colour LCD screen display clear and delicate; Minimalist keyboard design simplify operation, easy to use.

With more than 80 kinds of car testing and scan the QR code on the back of device can open video help files to show you how to test vehicles.

• First test projects:  intake manifold vacuum degree & ignition, lampblack adjustment valve vacuum degree & ignition, exhaust ignition (idle), exhaust ignition (start).
• Start & Charge: Charging circuit, current and voltage.
• Actuator: Gasoline / Diesel.
• Bus Detection:   CAN bus data observation, CAN bus signal integrity, CAN bus LH long-term acquisition, LIN bus.
• Sensors:  air flow meter, camshaft, crankshaft, distributor, lambda sensor, throttle position. Ignition: Primary/Secondary.
• Oscilloscope: 2 channels oscilloscope, 80MHz bandwidth, 250M sampling rate.
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test;
• Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz

Four-digit display voltage and current, resolution up to 10mV/1mA;

Power: 180W, Voltage: 0-160V, Current: 0-4A

Communication Interface: RS232

Standard USB quick charging function, 5-12V output, supporting a variety of quick charging protocols

10 groups of data storage/retrieval functions

AC input voltage 230/115V switch, universal

Fully isolated serial port, software support multiple power supply control, easy to set up measurement and control or aging system

Over voltage, over current, overload, overheating, short circuit protection functions

Low noise temperature control fan, quiet and durable

0~160V/0~4A output is stable and pure

On/Off output control, one-key panel lock function to prevent mis operation

Constant voltage (CV)/ constant current (CC) mode automatic switch, effectively protect the circuit

Two-stage adjustment topology, no impact on the load when the power is turned on

Ultra-thin body, light and easy to carry, excellent indicators, excellent quality, stable performance, strong durability.

ToolWorld is Authorized Hantek Distributor 

Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter and 6-digit hardware frequency indicator functions; 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defence, embedded systems, computers, research and education.

2 channels which are respectively controlled by independent knobs.

100MHZ analog channel bandwidth

Sampling rate up to 1 GSa/s

8M memory depth

Vertical range 2mV/div ~ 10V/div

Built-in 1 CH 25MHz waveform generator (DSO2D10, DSO2D15)

Vertical resolution: 8bit

Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC

BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN

Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures.

A 3-digit digital voltage meter and a 6-digit hardware frequency indicator

32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation etc.

2 sets of digital voltmeters

Support threshold testing, free measurements within the screen.

Abundant SCPI remote command control

USB Host/Device.

Feature:

• Support 1MΩ/50Ω impedance switching to ensure signal integrity;
• The sampling rate of the entire system is 2GSa/s, with a maximum bandwidth of 350MHz;
• Built in arbitrary waveform generator, capable of outputting 5 standard waveforms, supports custom arbitrary waveform output, and supports burst output;
• Protocol Trigger: Comes with five standard serial protocol triggers and decoding, supporting protocols including UART, LIN, CAN, SPI, IIC, making it easy to analyze serial bus data;
• 32 automatic measurement and threshold measurement functions, with test results supporting statistical analysis;
• Two sets of digital voltmeter functions and hardware frequency meter functions;
• Standard SCPI remote control instructions, convenient for users to build testing systems;
• Save and export function, which can save settings CSV, Information such as images, reference waveforms, and waveforms;
• Four sampling methods: normal, average, peak, and high-precision;
• 14 operating languages, supporting over 90% of countries and regions worldwide;
• There are two cursor measurement modes: manual and tracking, and the Math function also supports cursor measurement;
• 500uV-10V vertical measurement gear, 300VCAT Ⅱ withstand voltage input;
• FFT scale display, convenient for reading results;
• Manual, single time, one click AUTO measurement, simple and fast waveform measurement;
• XY mode supports dual window display, making it easy to understand waveform phase changes;

Package:

• 1 x Oscilloscope;
• 1 x oscilloscope probe;
• 1 x power cable;
• 1 x USB cable;

Hantek1833C handheld LCR Meter is a portable handheld measuring instrument to measure the parameters of the component such as inductance, capacitance, resistance and so on. small volume, powered by 5V lithium battery, it can meet the requirements of desktop LCR application, and can also be applied to flow measurement and handheld measurement.

• 100Hz, 120Hz, 400Hz, 1kHz, 4kHz, 10kHz, 40kHz, 50kHz, 75kHz, 100kHz 10 typical test frequency
• 2.8-inch TFT LCD, Switch between Chinese and English
• HD display, dual display of measurement data, the result is clear.
• Support data record analysis.
• Support PC upper computer, easy to control and measure remotely
• Test lead: 3 terminal/5 terminal switch
• Measuring speed: high speed/intermediate speed/low speed switch
• Range: support manual/auto switch, easy to do quick measurement
• LCR adopted rechargeable design, Large capacity lithium battery, super standby
• Double shock protection sleeve, all-round protection, shakeproof, fall-arrest, protect the machine from damage, longer use time, more comfortable measurement
• Bracket design, easy to put and measure

HT2018B\C series storage battery tester is a test equipment specialized for activated lead-acid battery. It can get storage battery working condition through testing starting process, charging process and electrical load process, then analyse life state of lead-acid battery rapidly and accurately. In addition, HT2018C is with printing function of test report.

Feature:

• Test carload state directly.
• Test car starting voltage.
• Test car charging voltage normally or not.
• Low frequency signal testing without external large load discharge test.
• Easily read out electrical capacity and physical condition to estimate lifecycle.
• Directly detect on the car without removing the battery.
• Rapidly and accurately display the result of battery test.
• Continuous operation, fully protected overvoltage, and reverse connection protection.
• No electricity, no fever, no spark, no operating danger, mainly all adults can make it.
• Battery test: cold starting current, battery internal resistance and voltage, lifecycle analysis.
• Starting test: battery changing status during system starting.
• System test: output state during charging system working.
• Maximum load test: battery maximum load state.
• Application field: storage battery manufacturer, automobile production line, Auto 4S limited, storage battery distributor and owner of truck, private car.

Feature:

• Support 1MΩ/50Ω impedance switching to ensure signal integrity;
• The sampling rate of the entire system is 2GSa/s, with a maximum bandwidth of 350MHz;
• Built in arbitrary waveform generator, capable of outputting 5 standard waveforms, supports custom arbitrary waveform output, and supports burst output;
• Protocol Trigger: Comes with five standard serial protocol triggers and decoding, supporting protocols including UART, LIN, CAN, SPI, IIC, making it easy to analyze serial bus data;
• 32 automatic measurement and threshold measurement functions, with test results supporting statistical analysis;
• Two sets of digital voltmeter functions and hardware frequency meter functions;
• Standard SCPI remote control instructions, convenient for users to build testing systems;
• Save and export function, which can save settings CSV, Information such as images, reference waveforms, and waveforms;
• Four sampling methods: normal, average, peak, and high-precision;
• 14 operating languages, supporting over 90% of countries and regions worldwide;
• There are two cursor measurement modes: manual and tracking, and the Math function also supports cursor measurement;
• 500uV-10V vertical measurement gear, 300VCAT Ⅱ withstand voltage input;
• FFT scale display, convenient for reading results;
• Manual, single time, one click AUTO measurement, simple and fast waveform measurement;
• XY mode supports dual window display, making it easy to understand waveform phase changes;

Package:

• 1 x Oscilloscope;
• 1 x oscilloscope probe;
• 1 x power cable;
• 1 x USB cable;

Feature：

• 4CH oscilloscope+EXT+AFG+DVM+auto range function
• 250MHz bandwidth，
• Minimum range 500μV /div，
• 1GS/s sample rate.
• Over 32 types of auto measurement function Advanced digital trigger system, high trigger sensitivity. Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc. Serial bus triggering and decode,  Bus protocol information can be quickly and intuitively displayed in table form.
• Function/arbitrary signal generator25MHz,12BitS resolution, 200MHz DDS, ARB/square wave/sine wave/triangular wave/trapezoidal wave/impulse wave/DC etc., easy to simulate the sensor. Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update. Support a variety of SCPI remote control command Support optional RS232 port, LAN port. (Optional)Stable and reliable quality, sturdy and durable.

1. Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.
2. Intelligent charging control: Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy.
3. Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.
4. Large-capacity lithium battery power supply: 18650 replaceable lithium battery power system, free from replace battery.
5. 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone.
6. AUTO one-key test: Magic tool and essential function for test newbie.
7. Volume small, one hand holding: The 45 degree suspension bracket design provide you a work station anywhere anytime;One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective.
8. Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free.Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately.One-click switching its Chinese and English language menu.
9. Color LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify.Minimalist keyboard design simplify operation, convenient to use.
10. Unibody casing: fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble.
11. Self-calibration function: free from level drift after long time unused.Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test.
12. Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms. sine up to 25MHz.
13. Function of video help:scan code on back of machine to get help of video course.The PC software supports windows7/8/10 32-bit and 64-bit.

• Four sampling methods: normal, average, peak, and high-precision;
• 14 operating languages, supporting over 90% of countries and regions worldwide;
• There are two cursor measurement modes: manual and tracking, and the Math function also supports cursor measurement;
• 500uV-10V vertical measurement gear, 300VCAT Ⅱ withstand voltage input;

• Bandwidth: 20MHz-200MHz; Sample Rate: 250MSa/s.
• Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful but also greatly enhanced the hardness of aluminium alloy surface and has good heat resistance and strong wearability.
• Standard USBXI (TM) interface, easily inserts into USBXI (TM) housing to make up a combination instrument.
• USB2.0 interface, no external power source required, easy to use.
• Be suitable for notebook computer, product line maintenance, be used easily on business.
• Dimensions (mm):205(L) x120(W) x35(H), be carried easily.
• High performance, 250MS/s real-time sampling, 20MHz-80MHz bandwidth.
• Operating System: Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA.
• 23 measurement functions, PASS/FAIL Check, be suitable for technical application.
• Waveform average, persistence, intensity, invert, addition, subtraction, multiplication, division, X-Y plot.
• Save waveform in the following: text file, jpg/bmp graphic file, MS excel/word file.
• FFT
• One computer can connect many DSO, extend channel easily.
• LabVIEW\VB\VC Second Design instance.

Four-digit display voltage and current, resolution up to 10mV/1mA.

Standard USB quick charging function, 5-12V output, supporting a variety of quick charging protocols.

10 groups of data storage/retrieval functions.

AC input voltage 230/115V switch, universal.

Fully isolated serial port, software support multiple power supply control, easy to set up measurement and control or aging system.

Over voltage, over current, overload, overheating, short circuit protection functions.

Low noise temperature control fan, quiet and durable.

35V/6A output is stable and pure; On/Off output control, one-key panel lock function to prevent mis operation.

Constant voltage (CV)/ constant current (CC) mode automatic switch, effectively protect the circuit.

Two-stage adjustment topology, no impact on the load when the power is turned on.

Ultra-thin body, light and easy to carry, excellent indicators, excellent quality, stable performance, strong durability.

• Four-channel programmable linear DC regulated power supply, 245W output power, electrical isolation between channels, four channels continuously adjustable.
• The HDP4000S series supports rear output, making it easy to test system wiring, with a 2-wire/4-wire display mode.
• 4.3-inch colour display, real-time display voltage/current/power values and waveform, which makes the output status and trend clear briefly.
• High resolution: 1 mV, 1 mA; HDP4000S series resolution: 0.1 mV, 1UA.
• Low ripple noise: < 350 μVrms / 2 mVpp.
• Transient response time: ≤50μs.
• Over voltage/over current/over temperature/short circuit protection functions. The over voltage and over current parameters can be flexibly set to achieve effective load protection.
• Intelligent temperature control fan automatically adjusts the speed, effectively reducing fan noise.
• The use of colour and numeric identifiers makes it easy for users to identify information relevant to the output of a particular channel.
• Provide 10 groups of storage for sequence/delay/record/panel condition settings.
• List function. By editing the single-step voltage, current, time, list function can generate a variety of complex sequences to meet the complicated test requirements.
• Recorder function. The recorder can record the output voltage, current and power, and display them by graph.
• Keyboard lock function to prevent mis operation.
• Support SCPI remote command control.
• Support U disk (FAT32 format, Flash) storage, one-click screenshot and data recording function.
• Standard configuration ports: USB HOST, USB DEVICE, LAN, digital I/O interface, RS232/RS485 (HDP4324B/HDP4424B), GPIB (HDP4324H/HDP4424H).

• Four-digit display voltage and current, resolution up to 10mV/1mA;
• Voltage: 80V, Current:  8A, Power: 180W
• Communication Interface: RS232
• Standard USB quick charging function, 5-12V output, supporting a variety of quick charging protocols
• 10 groups of data storage/retrieval functions
• AC input voltage 230/115V switch, universal
• Fully isolated serial port, software support multiple power supply control, easy to set up measurement and control or aging system
• Over voltage, over current, overload, overheating, short circuit protection functions
• Low noise temperature control fan, quiet and durable
• 0~80V/0~8A output is stable and pure
• On/Off output control, one-key panel lock function to prevent mis operation
• Constant voltage (CV)/ constant current (CC) mode automatic switch, effectively protect the circuit
• Two-stage adjustment topology, no impact on the load when the power is turned on
• Ultra-thin body, light and easy to carry, excellent indicators, excellent quality, stable performance, strong durability.

• Four-digit display voltage and current, resolution up to 10mV/1mA;
• Voltage: 0- 35V, Current: 0-6A, Power: 210W
• Communication Interface: RS232
• Standard USB quick charging function, 5-12V output, supporting a variety of quick charging protocols
• 10 groups of data storage/retrieval functions
• AC input voltage 230/115V switch, universal
• Fully isolated serial port, software support multiple power supply control, easy to set up measurement and control or aging system
• Over voltage, over current, overload, overheating, short circuit protection functions
• Low noise temperature control fan, quiet and durable
• On/Off output control, one-key panel lock function to prevent misoperation
• Constant voltage (CV)/ constant current (CC) mode automatic switch, effectively protect the circuit
• Two-stage adjustment topology, no impact on the load when the power is turned on
• Ultra-thin body, light and easy to carry, excellent indicators, excellent quality, stable performance, strong durability.

8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal. Transmit signals through USB 2.0 interface plug and play, and no need extra power supply;

AC/DC Current Clamp, 400Hz Bandwidth, 650A, 1mV/A, 10mV/A

Feature

• AC/DC frequency range: Up to 400Hz
• Effective Measurement Range: 20mA to 650A DC
• It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
• Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.

Application

Power circuit measurement and malfunction analysis;

Motor drive of frequency converter (or other electronics) measurement;

Power electronics equipments measurement.

• Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station owns three universal test instrument functions. It is outgoing right-hand product for engineers.
• Intelligent charging control: Its lithium batteries can be recharged by either high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone
• AUTO one-key test: Magic tool and essential function for test newbie
• Volume small, one hand holding: The 45-degree suspension bracket design provide you a work station anywhere anytime
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free
• Its cursor measurement function supports time and voltage manual measurement, and measure the required waveforms accurately
• One-click switching its Chinese and English language menu
• Colour LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify
• Minimalist keyboard design simplify operation, convenient to use.
• Unibody casing: fine touch feeling, favourable impact resistance, outstanding heat resistance, easy to disassemble.
• Self-calibration function: free from level drift after long time unused
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test
• Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz
• Function of video help：scan code on back of machine to get help of video course.
• The PC software supports windows7/8/10 32-bit and 64-bit.

Features:

• Frequency range: 9KHz-3.2GHz (tunable to 9KHz) AC Coupled
• Optimal sensitivity: -161dBm   RBW:10Hz to 1MHz
• IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
• built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable batteries.
• 5.6-inch highlight colour display, 640*480 resolution, waveform display clearly.
• HSA2000 Series spectrum analyzer has the lowest DANL and SSB phase noise, and narrowest RBW. It greatly enhances the recognition ability to the spurious signal and noise signal.
• Optional FM/AM modulation analysis, including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
• Standard spectrum feature. It can analyze the signal time stability, and find out lacunar signal in communication system accurately.
• Strong field strength test function, fit for the test work in transmitter, base station and the antenna coverage site. It can show the density of field strength or power. The user could also calibrate gain or loss by using amplitude offset function.
• HAS2000 Series has least RBW in the same level of analyzers, and can easily confirm, distinguish and measure two similar signals.
• The 5.7 inch highlight color display can provide accurate, bright and clear trace both inside and outside, no need to move to shading place for work.
• Short scanning time. It can fast catch the data and help to locate and recognize the irregular transient disturbance signal, and then optimize the testing time and accuracy.
• Advanced built-in battery management system is adopted. Standard super large capacity-7800mAh lithium battery, and support 6 packs of 18650 battery pack which can keep measurement working in site for over 4 hours.
• Firm and tight mechanical structure, close rubber sleeve pack, which is fit for harsh site work environment.
• Integration USB Host & Device, support USB flash disk memory, optional WIFI/LAN, which is convenient for networking and long-range control.
• Its PC software can achieve the management and storage of testing data.
• HSA2000 Series site measurement application.

• Frequency range: 9KHz-1.6GHz (tunable to 9KHz) AC Coupled
• Optimal sensitivity: -161dBm   RBW:10Hz to 1MHz
• IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
• built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable batteries.
• 5.6-inch highlight color display, 640*480 resolution, waveform display clearly.
• HSA2000 Series spectrum analyzer has the lowest DANL and SSB phase noise, and narrowest RBW. It greatly enhances the recognition ability to the spurious signal and noise signal.
• Optional FM/AM modulation analysis, including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
• Standard spectrum feature. It can analyse the signal time stability and find out lacunar signal in communication system accurately.
• Strong field strength test function, fit for the test work in transmitter, base station and the antenna coverage site. It can show the density of field strength or power. The user could also calibrate gain or loss by using amplitude offset function.
• HAS2000 Series has least RBW in the same level of analysers, and can easily confirm, distinguish and measure two similar signals.
• The 5.7 inch highlight colour display can provide accurate, bright and clear trace both inside and outside, no need to move to shading place for work.
• Short scanning time. It can fast catch the data and help to locate and recognize the irregular transient disturbance signal, and then optimize the testing time and accuracy.
• Advanced built-in battery management system is adopted. Standard super large capacity-7800mAh lithium battery, and support 6 packs of 18650 battery pack which can keep measurement working in site for over 4 hours.
• Firm and tight mechanical structure, close rubber sleeve pack, which is fit for harsh site work environment.
• Integration USB Host & Device, support USB flash disk memory, optional WIFI/LAN, which is convenient for networking and long-range control.
• Its PC software can achieve the management and storage of testing data.
• HSA2000 Series site measurement application.

Features:

• Frequency range: 9KHz-3.2GHz (tunable to 9KHz) AC Coupled
• Optimal sensitivity: -161dBm   RBW:10Hz to 1MHz
• IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
• built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable batteries.
• 5.6-inch highlight colour display, 640*480 resolution, waveform display clearly.
• HSA2000 Series spectrum analyzer has the lowest DANL and SSB phase noise, and narrowest RBW. It greatly enhances the recognition ability to the spurious signal and noise signal.
• Optional FM/AM modulation analysis, including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
• Standard spectrum feature. It can analyze the signal time stability, and find out lacunar signal in communication system accurately.
• Strong field strength test function, fit for the test work in transmitter, base station and the antenna coverage site. It can show the density of field strength or power. The user could also calibrate gain or loss by using amplitude offset function.
• HAS2000 Series has least RBW in the same level of analyzers, and can easily confirm, distinguish and measure two similar signals.
• The 5.7 inch highlight color display can provide accurate, bright and clear trace both inside and outside, no need to move to shading place for work.
• Short scanning time. It can fast catch the data and help to locate and recognize the irregular transient disturbance signal, and then optimize the testing time and accuracy.
• Advanced built-in battery management system is adopted. Standard super large capacity-7800mAh lithium battery, and support 6 packs of 18650 battery pack which can keep measurement working in site for over 4 hours.
• Firm and tight mechanical structure, close rubber sleeve pack, which is fit for harsh site work environment.
• Integration USB Host & Device, support USB flash disk memory, optional WIFI/LAN, which is convenient for networking and long-range control.
• Its PC software can achieve the management and storage of testing data.
• HSA2000 Series site measurement application.

Features

• Frequency range: 9KHz-1.6GHz (tunable to 9KHz) AC Coupled
• Optimal sensitivity: -161dBm   RBW:10Hz to 1MHz
• IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
• built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable batteries.
• 5.6-inch highlight color display, 640*480 resolution, waveform display clearly.
• HSA2000 Series spectrum analyzer has the lowest DANL and SSB phase noise, and narrowest RBW. It greatly enhances the recognition ability to the spurious signal and noise signal.
• Optional FM/AM modulation analysis, including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
• Standard spectrum feature. It can analyse the signal time stability and find out lacunar signal in communication system accurately.
• Strong field strength test function, fit for the test work in transmitter, base station and the antenna coverage site. It can show the density of field strength or power. The user could also calibrate gain or loss by using amplitude offset function.
• HAS2000 Series has least RBW in the same level of analysers, and can easily confirm, distinguish and measure two similar signals.
• The 5.7 inch highlight colour display can provide accurate, bright and clear trace both inside and outside, no need to move to shading place for work.
• Short scanning time. It can fast catch the data and help to locate and recognize the irregular transient disturbance signal, and then optimize the testing time and accuracy.
• Advanced built-in battery management system is adopted. Standard super large capacity-7800mAh lithium battery, and support 6 packs of 18650 battery pack which can keep measurement working in site for over 4 hours.
• Firm and tight mechanical structure, close rubber sleeve pack, which is fit for harsh site work environment.
• Integration USB Host & Device, support USB flash disk memory, optional WIFI/LAN, which is convenient for networking and long-range control.
• Its PC software can achieve the management and storage of testing data.
• HSA2000 Series site measurement application.

• HT25COP coil-on plug and signal probe can catch the ignition waveform of automobile engine easily. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers. It determines whether the ignition plug needs to be replaced or clean. Does fuel injector in electronic fuel injection system wok well? Is there any problem in the leak proofness of air cylinder? Does the gap between ignition plugs get larger? Does the electrode shape of ignition plug become sharp? Is there too much oil pollution or carbon deposition on the ignition plugs? Does the insulating property of ignition plug get worse? Is there any problem in the power supply system of storage battery? It can be used with normal oscilloscope. Special anti-interference design, high accuracy of measurement. Ergonomic design, can be arbitrary curved. Highlight LED which is convenient to operate at night or in dark condition.
• Directly measure on the ignition coil easily. Do not need to add extension cable.
• It can be used with normal oscilloscope. Special anti-interference design, high accuracy of measurement.
• Ergonomic design can be arbitrary curved. Highlight LED which is convenient to operate at night or in dark condition.

Warning

• To avoid injury keep the probe away from moving parts, such as the alternator drive belt and cooling fans.
• To present electric shock do not use if the probe’s sensor plate’s insulation shows signs of damage.