Atal Tools

• 9-in-1 Cable Testing Multifunctionality: Combines 9 key functions including wire mapping, digital cable tracing, port flashing, cable length measurement, PoE checking, crimping test, OPM (optical power meter), VFL (visual fault location), and NCV (non-contact voltage) test, streamlining network diagnostics in one device.
• Quick Wire Mapping: Quickly check for issues like short circuits, open circuits, or crossed wires in Ethernet cables, simplifying network maintenance and setup.
• Precision Wire Tracing with Anti-interference: Uses digital signals for reduced noise interference and higher sensitivity, and rapidly detects shielded and unshielded network cables.
• Fast Port Identification: Locate active network ports and view speed, duplex, and port negotiation settings with synchronized flashing to reduce troubleshooting time.
• Comprehensive PoE Testing: Detects PoE configurations, voltage, and polarity, supporting non-standard and IEEE 802.3AF/AT standards, giving you full power diagnostics for modern networks.
• Accurate Cable Length Measurement: Measures cables from 2.5m/8.2ft to 200m/565ft with just a plug-in connection, providing fast and reliable length information for structured cabling.
• Single-End Crimp Testing: Even with one end of an RJ45 cable, the tester provides accurate crimping diagnostics, showing correct and incorrect connections instantly.
• High-Precision Optical Power Testing: Measures optical power and detects light attenuation levels with high accuracy. Equipped with automatic frequency recognition, it allows plug-and-play use for specific wavelengths, ensuring efficiency for tasks involving fiber optic installations.
• Visual Fault Location (VFL): Utilizes a 10mW laser, with fast flash, slow flash, and constant modes for long-distance cable tracing and quick Fiber break point navigating.
• NCV (Non-Contact Voltage) Detection: Ensures electrical safety by detecting live wires and electrical equipment, helping you avoid potential electrical hazards.
• Durable Power with Type-C Charging: Long-lasting 1,500mAh polymer lithium battery with Type-C fast charging for extended usage, reducing downtime and increasing efficiency in fieldwork.

Introductory Price

• Identify af / at Standard Automatically - Quickly check power sourcing equipment (PSE) type, the IEEE802.3af or 802.3at standard.
• Inline Power Testing - Inline test info of standard/non-standard PoE devices, including power supply voltage, power supply polarity, crossover mode, and more.
• Cable Continuity Testing - Test the short circuit, crossover and open circuit status for STP, UTP lan cable.
• Loopback Testing - Test the loop circuit connected to switch is normal or not.
• Lamp - A lamp is equipped in main unit, helps work in darkness.
• Certification - Passes RoHS, FCC and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.
• 100% Affordable - Manufactured in China and a lot cheaper than competitor products with similar quality.

• Locate The Target Cable Quickly - Two scanning modes, analog and digital, can be switched at any time, with an anti-jamming probe, adjustable sensitivity, tone generator, and LED light, so that the receiver can quickly and accurately locate the target cable in a wide variety of complex environments.
• Ethernet Continuity Test - Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly.
• Measure Cable Length Accurately - Measure the network cable in the range of 2.5m-500m.
• Port Blink Test - Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch.
• PoE Testing - Identify which pins are providing power and detect how much voltage and identify which type of PSE (AT/AF standard).
• Work Safely - Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience.
• Rechargeable Battery- The network tester can be recharged using a USB-C cable, and the lithium battery provides long-lasting power.
• Other Functions - Quality control of the crimping crystal.
• Certification - Passes RoHS, FCC, and CE compliance testing, and Noyafa is certified to the ISO 9001 standard.
• 100% Affordable - Manufactured in China and a lot cheaper than competitor products with similar quality.

UT685B KIT can test various types of cables (including twisted pair cable, coaxial cable, and POE network cable): you can find the cable, detect the cable length, and line sequence, and confirm whether it is POE and POE standards. Plus, it integrated RJ11, RJ45, and coax test ports to support virtually any low-voltage cable testing without needing awkward adapters.

Effectively reduce the operator’s ineffective testing and improve work efficiency, which makes high-quality installations more efficient and easier to troubleshoot.

Features:

• 2.8-inch backlit LCD display
• Graphical interface
• Cable length test
• Tests RJ11, RJ45 and coaxial cable types
• Identify POE standards
• Digital hunt
• Range 500m
• Resolution 0.33m
• 70V DC input protection
• TDR technology: no blind area testing

• 3-in-1 tester for fiber optics: Find three features in one compact device, optical meter, source light, and, visual fault locator. Check continuity, test loss, and find physical damages.
• Pocket-sized design: Made to be handheld, it's smaller than a mobile phone, carry this optical tester anywhere you go. Put it in your pocket or toolbag at ease.
• 3 fiber optic interfaces: From the most common fiber optic connector SC to FC and ST, connect any of these fiber cables to NF-911 and run a test.
• Protection caps: To reduce the pollution of dust, we provide protection caps to 3 fiber optic jacks.
• Accurate testing result: Make every test result precise with an error of less than 0.3 dB.

• Optical Power Meter Red Light All-in-One, 10 Wave lengths
• Accurate optical Power Meter: Detection of luminous power and degradation of optical terminals/transmitter and receivers/modules, etc.(Able to be tested separately)
• 10 Wavelengths Testing: Controlled by microprocessor, mainly used for continuous optical signal power measurement and fibre optic continuity testing.
• Red Light Wavelength 650nm: Concentrated fiber optic beam, easy to penetrate long-distance optical fibre, fast detection of continuity, stable and strong performance
• 2.5mm General Connector: FC/SC connector supported, interchangeable adaptor heads Type-Charging Ports.

• Continuity & Wiremap: Instantly verify each pair on CAT5/CAT6 cables for open/short or miswiring, preventing downtime.
• PoE Testing (DC 5–60 V): Support IEEE802.3af/at/bt standards and non-standard loads; ensures safe PoE power delivery.
• Length Measurement (5–300 m): Pinpoints cable breaks or distance to fault up to 300 m, saving time on cable runs.
• Port Flash (10/100/1000 Mbps): Quickly identify active switch ports and duplex mode (full/half) by flashing link LEDs.
• Remote Continuity Alignment: Includes a detachable RJ45 remote to check cable sequence in-wall or across patch panels.
• 2.4″ Full-Color LCD: Large, easy-to-read screen displays test modes, icons and results at a glance—even in low light.
• Anti-Burning Protection (≤ 60 V): Safeguards the tester against accidental live voltage up to 60 V, prolonging device lifespan.
• 3.7 V 1500 mAh Rechargeable Battery: Delivers hours of continuous use; USB-C charging means no more disposable batteries.
• Auto-Off: Conserves battery life by powering down after 5/15/30/60 minutes of inactivity.

• NF-8128 Ethernet Cable Tester with Local Alignment Remote Alignment Cable Length Testing Network cable Tools 
• Simple and easy to useNo need for tedious operations: Locate breakage for lan cable
• 350m ceiling-breaking length measurement range: Quickly meet your length measurement needs
• Large screen design Exquisite and brilliant: Large color screen, Backlight function
• 1500mAh large battery: A full charge can last a long time
• Military-Grade Drop Protection Defeat any accidentally drops

New Launch

● 36V DC voltage measurement
● Resistance, capacitance, continuity, diode measurement
● The pen can be rotated by 180°, which is convenient for reading and diode/LED
● Zener diode polarity test

ToolWorld is Authorized UNI-T Distributor

Includes calibration/conformity report

UT682 wire tracker consists of a transmitter and a receiver, it is able to track ethernet/telephone/power cables without opening their insulation. 

UT682 can troubleshoot ethernet cables and is a recommended tool for debugging communication cables and audio/video cables.