Atal Tools

Thumb wheel design can ensure easy control on the desoldering wire flowing speed.

Desolder Wick with Wheel Dispenser, Width 1.5mm., Length 1.5Mtr

ROHS Complaint

• Accurate, 100-m laser measuring thanks to digital camera viewfinder with zoom function
• Large, high-contrast IPS colour display with flip screen ensures optimal reading
• Laser measure connects via Bluetooth for efficient data documentation
• Precise laser measure for easy indoor and outdoor measuring and documenting
• Includes: 3X 1.5V LR6 Battery, Carry Case
• Material number 0 601 072 YK0 EAN 4059952617169

• Measurement range upto 1500V DC to check solar inverter input voltage
• Extended current range upto 1500A AC (Trms)/DC for measurement at high current carrying applications
• Patented rotational jaw feature so as to keep display in front in every situation
• Patented trigger at back side so as to keep a safe distance from loads and offer operational efficiency
• Double mould casing to offer higher grip while holding the meter
• Consists of AC voltage upto 1000V (Trms), resistance, continuity, capacitance, frequency, diode, duty cycle, temperature, etc. functions
• Complies with CE, IP 50, CAT IV 600V protection

RISH Clamp SOLAR has DC voltage measurement upto 1500V DC, to measure inverter input voltage at solar power plants and current measurement upto 1500 A  AC/DC. It also measures AC Voltage(TRMS), Capacitance, Resistance & Continuity, Frequency & Duty cycle and temperature measurement. 

ToolWorld is Rishabh and Shanti Instruments authorized distributor

Includes calibration/conformity report

Feature highlights:

• The Bakon BK805 Electrical Wire Stripper is a professional-grade industrial tool designed for non-destructive wire stripping.
• Made of durable metal, it ensures precise and efficient performance.
• Its intelligent design eliminates the need for installation, making it user-friendly.
• Suitable for industrial applications, this blue wire stripper combines reliability with practicality.
• Certified with ISO9001:2000, it guarantees compliance with international quality standards, ensuring market access and customer trust.

• Measurement of active, reactive and apparent power for 1 phase, 3 phase 3 wire & 3 phase 4 wire
• Measure up to 49th harmonics along with THD
• Power factor measurement to know how much actual power is utilized
• Power view software facility and mobile android app facility for analysis
• Horse Power, Inrush Current, Energy (for single phase and balanced three phase) measurement, Ampere hour measurement
• LPF(Low Pass Filter) function for accurate measurement on VFD drives

Automatic shutdown (OFF after 10 minutes);

Can calculate the maximum value of torque, minimum and mean value;

Torque value display automatically zeroes;

Automatic deletion of torque value (the time required to adjust the automatic reset by switching)

Use LCD to display test values. Easy to read.

The torque value can be set and the buzzer can be used to prompt the operator

When setting tool torque, peak display is retained until reset to ensure accuracy

It can be tested when the reverse direction is reversed

Inverse time direction measurement, data show negative;

The strain gauge is directly attached to the torsion sensor. The design of its own shock-proof device is simple

Can be connected to external data processing control system

This tester USES rechargeable batteries. Small size. Light weight, easy to carry

The data output port can be transmitted to the computer for processing

• Easily switch between 18V, 12V, and alkaline C-cell power sources to avoid downtime
• Rubber-enforced housing and laser windows, and an IP65 rating for peace of mind on the toughest jobsites
• Secure mounting and precise work are made easy thanks to the integrated mount with strong magnets and pivot fine adjustment

• Flexible fitting of the mount, for example with screws, magnets or on a tripod
• The clamp makes the BM1 ideal for ceiling applications
• Height adjustment with locking device for safe and precise alignment

• Measures precise tilts in degrees, percent or millimetres/metres
• Direction arrows and audible signals at 0° and 90° for easy alignment
• Measured values automatically turn on the display when working overhead
• Audible signal at 0° and 90°
• Easy calibration function for sustained accuracy
• Robust aluminium housing
• Slanted, easy-to-read display
• Comes complete with a protective bag for easy transportation and safe storage
• Two vials enable use as a spirit level
• IP54 protection
• Longer for maximum precision
• Length 120 cm
• Measurement range 0 – 360° (4 x 90°)
• Electronics measurement accuracy 0°/90° ± 0.05°

SKU 0 601 076 800 | EAN 3165140803236

• Versatile - Horizontal and vertical manual dual slope function enable change in grade in two-axis application
• Flexible - Variable-speed and Scan-angle selection allow optimum usability at different lighting conditions
• Robust - IP 56 rated to protect against dust and water for tough jobsite conditions, with shock-warning function to alert error due to vibration
• SKU 0 601 061 S40

• BOSCH RADAR TECHNOLOGY: The detector uses advanced radar technology to detect all common objects: live/non-live cables, water-filled/empty plastic pipes, magnetic/non-magnetic metal and wooden studs
• EASY DOCUMENTATION: The screenshot feature supports quick and easy documentation of the detection results, which can be downloaded via USB-C and and Micro SD card.
• INTUITIVE USER INTERFACE: For precision, higher safety, and clear illustration of detected objects. Four different view settings offer flexibility to get the best results for each situation.
• APPLICATIONS: The D-tect 200 C is ideal to search for objects before drilling and monitor construction progresses. It also features a leakage detection function to locate leaks inside walls.
• ITEMS INCLUDED: Wall Scanner D-tect 200 C, AA1 adapter, 4x AA batteries, USB-C cable, hand strap and protective bag.
• SKU: 0 601 081 6K0

• Spot measurement provides accurate detection on narrow surfaces
• Centre finder offers visual guidance, to clearly identify the precise location of the object's centre
• Dual Power Source allows for use with a 12 V Li-ion battery or with standard alkaline batteries

• Gives you confidence by detecting metal, live wires, and wooden studs behind the wall
• Easy to use with simple mode selection and marking hole
• Built for operation on tough job sites thanks to shock-absorbing rubber casing and IP54                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          

• The Auto Test Cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
• It's about 3 meter in length allows the oscilloscope to be placed on the work bench away from the car being tested or repaired.
• It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.
• It adopts full shield which can help reduce the noise interference.
• To avoide the lines twisting together, the two pieces of lines with connectors are not the same in length.
• The short line is earth wire, and the long line is positive pole which should be connected with the auto engine cable, which also can cooperate with a 20:1 attenuator.

The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products. Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition.

• Attenuation: 20:1
• Bandwidth: 10MHz
• Input Res: 1.053M

• Suitable for GRL 400 H; GRL 300 HV; GRL 500 H/HV Professional; all laser measures                                                                                                                                                                                                                                                                                                                           

• Fast and precise calculation of angles
• Angles can be transferred precisely onto workpieces by means of a mechanical locking screw

SKU 0 601 076 500

• Enhanced display – high resolution, easy-to-see 4 In. display captures color images with storage for up to 30 pictures
• Ergonomic handle – provides comfortable use, allowing for increased inspection duration
• Orientation indicator – signifies which end is up
• 5 Ft. cable – allows access to narrow spaces
• Easy to use, intuitive design – uncomplicates the user experience with easy to read keypad and menu
• Integrated connectivity – for uploading images directly to computer using the included USB-C

High quality of SURPA

Features

• BK698A feet body Tester is for testing the human body comprehensive resistance(include the resistance of the human body,wrist strape,shoes etc) Pre-emitting diode display with intuitive design.
• The teter can test and warn when the human body comprehensive resistance more than 10^9 or less than 10^5,
• Feet body Tester configured 750kΩ - 10MΩ circuit (used to test wrist band) and 750kΩ - 100MΩ circuit (for testing shoes), this instrument is ideal for testing the wrist strap and shoe
• This product can quickly test ESD equipment, three separate devices (wrist band, left shoes and right shoes) a complete ESD testing;
• 3 respectively show three states of each

LO (below the set value);

Pass (within the set range);

HI (above the setpoint) alarm function

• High resolution of 1280 x 720 pixels ensures clear picture quality on big 5” screen
• The unique AutoUp function enables optimal spatial orientation by automatically turning the image the right way up
• Ideal for tough jobsites thanks to IP-rating for protection against dust and water
• With the GIC 12V-5-27 C Professional, photos and video footage are easily transferred via USB-C® cable or Micro-SD card.
• SKU 0 601 241 4K0
• EAN 4059952657271

Small size and modern interface with only two buttons for convenience and ease of use

Fast and accurate measurements thanks to the high-precision system and ISO 16331-1 certification

Multiple measuring functions and units allow for versatile applications

Measurement range 0.15 – 30.00 m

 
Material number 0 601 072 XF0 EAN 4053423243956

• Versatile fixing of the mount
• Height adjustment with locking device for safe and precise alignment
• Suitable for GRL 400 H; GRL 300 HVG; GRL 300 HV; GRL 500 H/HV Professional

• Auto ignition probe is a kind of inductive capacitance sensor, it must match with an oscilloscope.
• Close to use, can be used to test a spark ignition secondary overlapping wave, overlapping wave parameters, thus achieved the detection, the diagnosis engine ignition position, make each cylinder ignition voltage changing with time directly from the oscilloscope display.
• The loot line has three ends, a joint meet oscilloscope for BNC use, a clip for use, a clip grounding to pick high-voltage gleaned clip with. Loot clincher over is a attenuator, used for loot high-pressure attenuation for low pressure, thus protecting oscilloscope not electrify impact.

When used please note:

(1) Test clips shall not directly clip in spark plug, should be caught in the connection of the spark plugs of insulation wire, in order to prevent the breakdown and causing a shock.

(2) To distance other high-voltage at least 2 inches apart, lest produce interference.

(3) HT25 leading line length 2.5 meters, the decay of up to 10,000:1.

• Can use special screws 1:1 short screws, screws with washers can be universal, cost-effective.
• The guide rails are easy to adjust, and the track of the screw machine can be pulled out for free adjustment.
• Suitable Screw L=20MM
• Output Speed 2capsules / sec
• Diameter of the screw head 1.0-5.0mm
• Counting is accurate and the counting range is adjustable (0~9999).
• There is no screw phenomenon. The screw moves the bucket in the drum. Any screw that has not entered the track is cleared into the drum and enters the next cycle.
• By adjusting the vibration frequency to change the speed, the position of the screw to the pick-up point will not affect the work efficiency due to back-and-forth jitter.
• Independent control of feeding and feeding drives allows you to freely set the desired delay stop time. When an abnormality such as a card screw or a short circuit occurs, the screw machine starts the fault alarm function.

• Green laser points provide up to four times better visibility than red points
• Durable design for tough conditions: rubberised housing with recessed glasses, IP65 dust and water jets protection
• Integrated rotation mount with strong magnets for fast and secure mounting

SKU 0 601 066 N00

• Green laser points provide up to four times better visibility than red points
• Durable design resists tough conditions: rubberised housing with recessed glasses, IP65 dust and water jets protection
• Fast and secure mounting thanks to integrated rotation mount with strong magnets

SKU 0 601 066 P00