Atal Tools

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability

• The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz.
• With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals.
• Maximum measured voltage signal is 400 V.
• Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments

 Functions (Component Tester)

• Automatically analyse NEC protocol infrared code.
• Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

 Functions (Signal Generator)

• The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

 

UPO1104 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 100MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

 

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

 

UPO1204 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 200MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

 

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The FNIRSI DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500 MS/s and an analog bandwidth of 180 MHz. The measurement results are displayed on the high-contrast 2.8-inch IPS full-view LCD screen with digital fluorescence technology. 

• 2-ch handheld oscilloscope & DDS signal generator
• 180 MHz bandwidth
• 500 MS/s sampling rate
• 20 MHz signal generator
• Innovative digital trigger system
• Cursor measurement function
• 5 mV sensitivity
• 50000 wfm/s waveform refresh rate
• 2.8" IPS full-vision high-definition display
• Built-in 4.2 V/3000 mAh lithium battery
• Automatic shutdown setting
• High-voltage anti-burning protection

Additional Information:

• Delivery Time: Same Day
• Packaging Details: DPOX180H Oscilloscope,Matching 200MHz Probe*2, 5V2A Power Adapter,USB Data Line

• Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
• Highly Performance: 7 inches, 800 * 480 resolution, bright colors, and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.
• Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc
• Easily Measuring: Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
• Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency, and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Packing List: Standard 1 * FNIRSI 1013D Oscilloscope Host 2 * Matching 100MHz Probe (1X and 10X) 1 * USB Cable 1* Charging adapter Add P4100 Probe 1 * FNIRSI 1013D Oscilloscope Host 2 * Matching 100MHz Probe (1X and 10X) 1 * P4100 Probe(100X) 1 * USB Cable 1* Charging adapter

UNI-T UPO1054 Digital Oscilloscope- 50 Mhz 4 Channel 

 

UPO1054 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 50MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

Additional Information:

• Delivery Time: Same day
• Packaging Details: Standard Packing

 
UPO2000 series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T's original Ultra Phosphor technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster. It is an oscilloscope designed for general design / debugging / testing needs in many fields, such as communication, semiconductor, computer, instrumentation, industrial electronics, consumer electronics, automotive electronics, on-site maintenance, R & D / education, etc. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and low wave signals.  

Waveform capture rate up to 1,000,000 wfms/s 

Support Bode Plot loop test and analysis function 

Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames

Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)

4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.

Auto measurement of 36 waveform parameters

Multi-Scopes supports multi-channel independent trigger and fluorescent display

DVM supports multi-channel independent AC / DC true RMS measurement

Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout,    duration, setup/hold, Nth edge and pattern trigger

Area trigger function, which can be used to capture accidental signals and observe complex signals

Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay

Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display

8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.

Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA

Support SCPI programmable instrument standard commands

Support web access and control

Bandwidth 200MHz

Channels 4

Real- Time Sample Rate:  2 GSa/s

MAX. Memory Depth 56 Mpts

Additional Information:

• Delivery Time: Same day
• Packaging Details: Standard Packing

 

The UPO2000 series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T's original Ultra Phosphor technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and low wave signals.

• Waveform capture rate up to 1,000,000 wfms/s 
• Support Bode Plot loop test and analysis function 
• Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames
• Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)
• 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.
• Auto measurement of 36 waveform parameters
• Multi-Scopes supports multi-channel independent trigger and fluorescent display
• DVM supports multi-channel independent AC / DC true RMS measurement
• Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout, duration, setup/hold, Nth edge and pattern trigger
• Area trigger function, which can be used to capture accidental signals and observe complex signals
• Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
• Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display
• Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA
• Support SCPI programmable instrument standard commands
• Support web access and control
• 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.
• Bandwidth 100MHz
• Channels 2
• Real- Time Sample Rate:  2 GSa/s
• MAX. Memory Depth 56 Mpts

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

 

UPO1000CS series is a multi-function, cost-effective digital phosphor oscilloscope. It adopts parallel digital signal processing technology, which greatly improves the data processing speed and waveform capture rate. The original Ultra Phosphor technology can present the cumulative effect of the tested signal as a multi-layered afterglow. Compared with traditional digital storage oscilloscopes, the persistence of digital phosphor oscilloscopes can present three-dimensional waveform data of amplitude, time and signal intensity. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and runt signals. 

• Bandwidth:  200MHz
• Channels:  2
• Real-Time Sample Rate:  1GSa/s
• MAX. Memory Depth:  56Mpts
• Waveform Capture Rate:  500,000wfms/s

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UPO1000CS series is a multi-function, cost-effective digital phosphor oscilloscope. It adopts parallel digital signal processing technology, which greatly improves the data processing speed and waveform capture rate. The original Ultra Phosphor technology can present the cumulative effect of the tested signal as a multi-layered afterglow. Compared with traditional digital storage oscilloscopes, the persistence of digital phosphor oscilloscopes can present three-dimensional waveform data of amplitude, time and signal intensity. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and runt signals. 

• BANDWIDTH:  100MHz
• CHANNELS:  2
• REAL-TIME SAMPLE RATE:  1GSa/s
• MAX. MEMORY DEPTH:  56Mpts
• WAVEFORM CAPTURE RATE:  500,000wfms/s

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The UPO2000 series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T's original Ultra Phosphor technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster.

• Waveform capture rate up to 1,000,000 wfms/s 
• Support Bode Plot loop test and analysis function 
• Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames
• Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)
• 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.
• Auto measurement of 36 waveform parameters
• Multi-Scopes supports multi-channel independent trigger and fluorescent display
• DVM supports multi-channel independent AC / DC true RMS measurement
• Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout,    duration, setup/hold, Nth edge and pattern trigger
• Area trigger function, which can be used to capture accidental signals and observe complex signals
• Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
• Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display
• 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.
• Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA
• Support SCPI programmable instrument standard commands
• Support web access and control
• Bandwidth 100MHz
• Channels 4
• Real- Time Sample Rate:  2 GSa/s
• MAX. Memory Depth 56 Mpts

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

 

New Launch

UNI-T CEX+ series provides a richer trigger mode,34 kinds of automatic parameter measurement and common mathmatical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and easily cope with the measurement needs of complex signals.

• Dual Channel, 200 Mhz
• Real Time Sample Rate: 1GSa/s
• Display range 8div x16 div and has a new Autoset strategy ,which can easily cope with complex test scenarios
• HD color LCD screen display
• Multi-language optional ,With 9 languages, it can meet the needs of users in more countries
• Multi-frequency square wave optional,ouput standard square wave 10Hz, 100Hz, 1kHz,10kHz optional
• Various parameter measurement and waveform recording functions

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UTD2000CEX+ SERIES-  New Launch

The CEX+ provides a richer trigger mode, 34 kinds of automatic parameter measurement and common mathematical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and can easily cope with the measurement needs of complex signals.

• Dual Channel, 100 Mhz
• Real Time Sample Rate: 1GSa/s
• Display range 8div x16 div and has a new Autoset strategy ,which can easily cope with complex test scenarios
• HD color LCD screen display
• Multi-language optional ,With 9 languages, it can meet the needs of users in more countries
• Multi-frequency square wave optional,ouput standard square wave 10Hz, 100Hz, 1kHz,10kHz optional
• Various parameter measurement and waveform recording functions

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UNI-T's UTP3305 DC power supply is a 3-channel power supply with 2 adjustable output and 1 fixed 5V output. It can output a maximum of 32 Volts and 5 Amps.

• Dual channel, two circuits of adjustable output voltage 0~32V and one circuit of fixed voltage 5V.
• Master-slave tracking, constant voltage and current,
• ???, ??? circuit can be used for master-slave tracking and used in parallel or in series.
• Low ripple, low noise
• High regulation: 0.01%
• Output ON/OFF control
• Constant voltage and constant current operation
• Overload protection, reverse polarity protection

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UTD2000CL series is an economical bench-type digital storage oscilloscope, meeting needs of basic measurements. The simple and clear front panel design provides convenient operations for users.

- Bandwidth 50MHz
- Channels 2
- Sampling rate 500MS/s

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Accessories: Probe x 2 (1x, 10x switchable), power cord, USB interface cable

• Including 7 measurement functions in one: oscilloscope, waveform generator, multimeter, FFT spectrum analyzer, frequency counter, protocol analysis, amplitude-frequency curve analysis.
• 500 MHz oscilloscope bandwidth, 5 GSa/s sample rate, Dual Channel
• 10.4-inch multi-touch screen
• In-Bluit Multimeter and multimeter data logger function
• Standard 400MB memory depth
• 600,000 wfms/s refresh rate, easy to capture exceptional and low probability events.
• Advanced function calculation function
• Standard 50M single-channel arbitrary waveform generator
• Waveform cloning function, quickly generate captured waveforms.
• A variety of triggers and bus decodes.
• Standard Bode plot for loop test analysis.
• Multi-interface design: USB Host & Device, LAN, VGA; USB Host supports standard SCPI.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Power Cord CD Rom Quick Guide USB Cable Probe Probe Adjust Current Extension Module Multimeter Lead (optional) Q9 Cable

The UTD2000CL+ Series is a market-proven economical digital oscilloscope.  This series of digital oscilloscopes has excellent technical indicators and can meet the main needs of basic testing. The front panel design is clear and intuitive,fully in line with the traditional instrument usage habits, and is convenient for users to operate

 

• Bandwidth: 100MHz
• Measurement channel: 2 analog channels
• Real-time sampling rate: 500MS/S
• Storage depth: 64kpts
• Waveform capture rate: 5,000wfms/s

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UTD2000CL series is an economical bench-type digital storage oscilloscope, meeting needs of basic measurements. The simple and clear front panel design provides convenient operations for users.

 

Bandwidth    25MHz
Channels    2
Sampling rate    250MS/s

Additional Information:

• Delivery Time: Same Day
• Packaging Details: ncludes: 1 x UNI-T UTD2025CL Digital Storage Oscilloscope 2 x Test Probes(1¿¿,10¿¿ switchable) 1 x AU Power Cable 1 x USB Cable 1 x PC Software CD 1 x English Manual

The XSA1015-TG spectrum analyzer from Owon has a frequency range up to 1.5 GHz and has a tracking generator, which gives this device many possibilities for this price. This spectrum analyzer has a large 10.4 "LCD screen and is equipped with advanced measuring functions.The noise that this analyzer experiences is at least -130 dBm / Hz and -150 dBm / Hz when the built-in pre-amplifier is switched on. able to produce an output frequency of 100 kHz to 1.5 Ghz. Furthermore, the power of this signal is adjustable from -30 dBm to 0 dBm.

 The Fnirsi 2C23T oscilloscope is an affordable handheld oscilloscope, function generator and multimeter. This device combines multiple practical functions while keeping a slim and portable design. Bandwidth of 10MHz, a sample rate of 50MS/s and 2 channels. In addition, it has a waveform saving feature, allowing for storage and later analysis of data. The function generator has a single channel, a frequency range of 1Hz-2MHz and an amplitude of 0.1-3.3V. The function generator can also output 7 different waveforms. The multimeter has 10.000 counts and supports AC/DC power and current measurements. The 2C23T has a 2.8" LCD color screen and is powered by a built-in 3000mAh battery, offering up to 6 hours of continuous use in standby mode.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing