Atal Tools

• Rotating clamp jaws facilitate the measurement at physically awkward positions, vertical bus bars, conductors placed at positions difficult to access.
• Comfortable operation of push buttons and function selector switch, in adverse field conditions.
• Clamp jaws can be opened or closed with the trigger placed at bottom side away from the jaws. This allows the user to place his/her hand at safer distance from live conductor. This greatly reduces exposure of human beings to electrical shocks.

• Rotating clamp jaws facilitate the measurement at physically awkward positions, vertical bus bars, conductors placed at positions difficult to access.
• Clamp jaws can be opened or closed with the trigger placed at bottom side away from the jaws. This allows the user to place his/her hand at safer distance from live conductor. This greatly reduces exposure of human beings to electrical shocks
• Location and design of trigger eliminates fatigues caused by single finger operation. It allows spreading the force required to open the jaws over more than one finger to ensure comfortable operation.

• True Root Mean Square (TRMS) measurement
• Measurement on Variable Frequency Drives
• Comfortable operation of push buttons and function selector switch, in adverse field conditions.
• Jaw opening of 55mm for standard wire diameter of 50mm
• Narrow housing for firm grip and easy to carry.
• The clamp meter can measure accurately at not only the High currents but also Low current ranges.
• User selectable Backlit: (Optional)
• Temperatures from -200 to 800 °C using Pt 100 and Pt 1000 sensors.
• Analog scale that updates at the rate 20 times/sec to observe fluctuations in input.
• DATA Hold Function
• MIN,MAX Function
• NULL ZERO Correction for Resistance
• NULL ZERO Correction for Capacitance
• AUTO and MANUAL ranging modes
• Diode Measurement
• Protection from dust and water: IP20 for terminals as per IEC60529

• Compact size leakage clamp meter
• Current measurement from 1µA to 60A
• Large jaw opening
• Data storage facility upto 99 records
• Complies with CE, CAT protection
• Software facility for reports

The Agam AIT 501 is the compact insulation resistance tester with diagnostic features like PI, DAR. When carrying out insulation resistance measurements this device uses test voltages of 500V, 1000V, 2500V and 5000V. At 500V this tester can carry out insulation resistance measurements from 1MOhms to 20GOhms, it carries out this measurement at 5MOhms to 1000GOhms. The tester can also be used to carry out AC/DC voltage measurements and low resistance testing. The AIT 501 is an auto-ranging device and will automatically choose the applicable range depending on the test. It also includes a large, backlit LCD screen, auto power down function when left idle and includes a USB interface for using the tester to download data to PC. To accompany USB connectivity the AIT 501 also includes data logging capabilities. When displaying testing results the AIT 501 uses both numerical and analogue bar graph representation of the test results. It also allows users to carry out comparisons, polarisation index calculations and dielectric absorption calculations. This insulation resistance tester is CAT III 600V, EN 61010-1 and EN 61326-1 compliant. An ideal tool for Insulation testing designed smartly.