Atal Tools

The UTS5000A series is a signal analyzer with a frequency range of 9 kHz to 26.5 GHz. It can be used as the main equipment required to build an automatic control system. It can also meet your needs in the test systems required for corporate R&D/factory production/education and scientific research, etc.

• Frequency range 9kHz to 13.6 GHz
• DANL:  -163 dBm(typical value)
• Phase noise: <-107 dBc/Hz (at 10 kHz off set, typical)
• Scan points up to 100001 points
• Minimum Resolution Bandwidth (RBW) 1 Hz
• Support advanced one-key measurement (option)
• EMI Analysis Function (optional)
• Support Analog Demodulation Analysis (optional)
• Support Digital Demodulation Analysis (optional)
• Support I/Q Analysis (optional)
• Configuration 15.6 inches 1920x1080 high-definition thin film transistor LCD display

The UTS3000A series is a signal analyzer with a frequency range of 9 kHz to 8.4 GHz. It can be used as the main equipment required to build an automatic control system. It can also meet your needs in the test systems required for corporate R&D/factory production/education and scientific research, etc.

• Frequency range 9 kHz to 3.6 GHz
• Frequency Resolution 1Hz
• Sweep Width Range 0Hz,100Hz- 3.6GHz
• DANL: -165 dBm (typical value)
• Phase noise: <-100 dBc/Hz (at 10 kHz off set, typical)
• Scan points up to 40001 points
• Minimum Resolution Bandwidth (RBW) 1 Hz
• Support advanced one-key measurement (option)
• EMI Analysis Function (optional)
• Support Analog Demodulation Analysis (optional)
• Support Digital Demodulation Analysis (optional)
• Support Real-time Spectrum Analysis
• Support I/Q Analysis (optional)
• Support Vector Network Analysis
• 10.1 inch high-definition capacitive touch display

The UTS3000A series is a signal analyzer with a frequency range of 9 kHz to 8.4 GHz. It can be used as the main equipment required to build an automatic control system. It can also meet your needs in the test systems required for corporate R&D/factory production/education and scientific research, etc.

• Frequency range 9 kHz to 3.6 GHz
• Frequency Resolution 1Hz
• Sweep Width Range 0Hz,100Hz- 3.6GHz
• DANL: -165 dBm (typical value)
• Phase noise: <-100 dBc/Hz (at 10 kHz off set, typical)
• Scan points up to 40001 points
• Minimum Resolution Bandwidth (RBW) 1 Hz
• Support advanced one-key measurement (option)
• EMI Analysis Function (optional)
• Support Analog Demodulation Analysis (optional)
• Support Digital Demodulation Analysis (optional)
• Support Real-time Spectrum Analysis
• Support I/Q Analysis (optional)
• Support Vector Network Analysis
• 10.1 inch high-definition capacitive touch display

 

The UTS3000B series spectrum analyser can measure frequencies up to 8.4GHz. It is a spectrum analyzer with wide frequency band coverage and superior performance. The series adopts mature all digital IF technology. It provides a variety of analysis functions, and up to 40001 scanning points, providing better help for your frequency domain analysis. This series of spectrum adopts a 10.1 inch large touch screen, which will bring you a better use experience. The UTS3000B series can be applied to functional/terminal/quality inspection tests in the electronics manufacturing industry, as well as wireless communication measurement, RF microwave courses, electromagnetic compatibility pre-scan, semiconductor measurement and many other application scenarios.

• Frequency Range 9kHz–3.6GHz
• Phase Noise -98 dBc/Hz @10kHz
• Sweep Points 40,001
• DANL -161dBm/Hz
• RBW 1Hz-3MHz

The XSA1015-TG spectrum analyzer from Owon has a frequency range up to 1.5 GHz and has a tracking generator, which gives this device many possibilities for this price. This spectrum analyzer has a large 10.4 "LCD screen and is equipped with advanced measuring functions.The noise that this analyzer experiences is at least -130 dBm / Hz and -150 dBm / Hz when the built-in pre-amplifier is switched on. able to produce an output frequency of 100 kHz to 1.5 Ghz. Furthermore, the power of this signal is adjustable from -30 dBm to 0 dBm.