Atal Tools

The new LM A series laser distance meters are new design to measure the distance precisely. It can measure AREA, VOLUME, ADDITION, SUBTRACTION, etc easily. It can also store 99 groups data. These meters can be used in interior/exterior design, construction, factory supervision, engineering inspection, real estate development and so on.

• Ergonomic exterior, comfortable handling
• Millimetre accuracy
• 99 groups data storage
• Quick, self-calculation with real-time readout
• Physical leveller(Horizontal and vertical)
• Multiple functions: Max/Min/continuous measurement, data storage, etc

Large LCD display, easy to read. Characteristic of " A " frequency weighting network are designed to meet IEC 61672 class 2. " Fast " time weighting characteristic mode.
Build in adj. VR is available for easy calibration. Condenser microphone for high accuracy & long term stabilty . Hold function to freeze the display value. Warning indicator for over and under range. LCD display for low power consumption & clear read-out even in bright ambient light condition. Used the durable, long-asting components,including a strong, light weight ABS-plastic housing case. Small and light weight design allow one hand operation. Low battery indicator. High quality with economical cost.

- Frequency & time weighting meet IEC 61672 class 2.
- 35 to 130 dB, 3 ranges, Data hold.
- A frequency weighting
- Fast time weighting.
- Size : 250 x 83 x 32 mm

UT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation. 

• Highly accurate and precise
• Measures acceleration, velocity, displacement
• Can select different vibration frequency characteristics
• Auto power off, low battery indication
• Data hold

LUTRON TQ-8800 is a torque meter.

Features:

• Professional torque meter with separate probe.
• 15 Kg-cm torque sensor included.
• 3 units: 15 Kg-cm/13 LB-inch/147.1 N-cm.
• Peak, Data hold, Zero, Max./ Min., Fast/Slow.
• Size: 180 x 72 x 32 mm. RS-232.

• 4 terminal devices for accurate measurement of very low resistance.
• Test Range: 20 m ohm-20 k ohm
• Ideal for measuring the resistance of components precisely.
• Ideal for testing protective conductors, lightning conductors, and welded points.
• High/Good/Low set-function for input quality control.
• Build in buzzer sound (GOOD STATUS) to assist the Q.C. judgment.
• Especial "CALCULATE" function to measure cable / wire length.
• Wide measuring range, 0.001 m ohm - 20K ohm, 7 ranges.
• RS232/USB computer interface.
• 26.7 mm large size and back-light LCD display, easy read-out.
• LSI circuit provides high accuracy, reliability, and durability.
• Built-in over input protection.
• Durable bench type housing plastic case stand

This Digital Oxygen Meter is supplied with a polarographic type probe with an incorporated temp.' sensor which serves for precision Dissolved Oxygen (DO), Oxygen in air (O2)

• Dissolved oxygen range : 0 to 20 mg/L
• Oxygen in Ait  : 0 to 100%
• Temperature, °C 0 - 50 °C
• Weight 335 g/0.74 LB
• Measurement & Range Temperature, °F 32 – 140 °F
• Temp. measurement Applications for Aquarium, Medical research, Agriculture, Fish hatcheries, Laboratory, Water conditioning, Mining industrial, Schools & Colleges, Quality control.
• Automatic temp. compensation from 0 to 50 0C for sensor
• Build in "% SALT" & '1Mountain Height" compensation, adjust the factor by push the button on the front panel.
• Auto shut off saves battery life
• Microprocessor circuit assures high accuracy and provides special functions and features
• Super large LCD display with contrast adjustment for best viewing angle.
• Multi display, show oxygen & temp. at the same time
• Records Maximum, Minimum and Average readings with RECAL

UT526 is a multifunctional electrical installation tester. It can be used to test insulation resistance, RCD status, low resistance continuity, and voltage measurements. UT526 can be used to test power distribution system, lightning protection system and wiring systems to ensure safe operations.

• Display count: 10000
• Manual range
• Phase switch (RCD): 0°and 180°
• Low battery indication
• Auto AC/DC voltage identification
• Red warning lights

This Pen Type O2 Meter from Lutron features a microprocessor circuit that offers precise measurements. Its reliable Oxygen sensor does not get affected by acidic gases like CO2.

Features:

• O2 measurement range : 0 to 30.0 % x 0.1 %,
• Temp. measurement range : 0 to 50 ℃
• Galvanic cell type for O2 sensor,
• Oxygen sensor with temperature compensated,
• Data hold, to freeze the desired reading value
• Auto power off saves battery life