Atal Tools

UT343A is used to measure the thickness of the plated and coated sheet on ferrous/non-ferrous, it has the large range up to 1750um, which is widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and also able to work steadily in workshop and outdoor.
Data storage: 199 groups
Measurement method: Single/Continuous
Max/Min/Avg
Unit conversion (um/mil）
Rotatable screen
LED/Buzzer alarm
Auto power off
 

UT343D Coating Thickness Gauge can measure coating thickness on ferrous and non-ferrous materials. This device is designed with a unique quick test feature, which allows users to set thickness range and using a 3-color LED and audio alarm to quickly determine if coating being tested falls within the preset range, greatly increasing work efficiency.
This CE certified device can store up to 500 sets of data for further analysis through the PC analytical software that is included.    
 
Measuring range             0~1250um
Accuracy             ±(3%H+1)um
Resolution         0.1um (0~99.9um); 1um (100~1250um)
Measurement method  Single/Continuous
Measurement mode      Max/Min/Avg
Metal type         Ferrous/ non-ferrous

UT107+ Automotive Multimeters have updated measurement functions, accuracy, and meter shell to test conventional and hybrid vehicles. This contains all the reliable functions of the traditional multimeter and offers RPM, dwell angle, pulse width, and battery test as well.
1000V AC/DC voltage and 10A AC/DC current (20A for 10s max) measurement range is suitable for most of the vehicle and electrical facilities maintenance. Up to 1000V VFC mode enables users to take accurate measurements on variable-frequency motor drives, water pumps, HVAC systems.
UT107+ is True RMS automotive multimeters that meet CAT II 1000V/CAT III 600V safety rating. UT107+ supports some extra functions, such as battery test, pulse width, capacitance with 6000 counts display.

• True RMS
• 1000V AC/DC voltage measurement
• 20A AC/DC current measurement (20A for 10s max)
• VFC 1000V voltage measurement
• Dwell angle 1-8CYL
• RPM 2STR/4STR
• Capacitance/Pulse width/12V battery test (UT107+)
• Temperature/Resistance/Frequency
• Data hold/Relative mode/Duty cycle
• Diode/Transistor
• Backlight
• CAT II 1000V / CAT III 600V

MSO7000X series integrates 9 instrument functions, which includes Digital Oscilloscope, Logic Analyzer, Function/Arbitrary Waveform Generator, Spectrum Analyzer, Digital Voltmeter, High-Precision Frequency Counter, Protocol Analyzer, Jitter/Eye Analyzer and Power Analyzer. This oscilloscope offers a cost-effective solution for advanced users.

• Analog channel bandwidth: 1 GHz/2 GHz
• Real-time sampling rate of the analog channel is up to 10 GSa/s. The maximum sampling rate of the digital channel is 1.25 GSa/s
• 4 analog channels, 16 digital channels. Maximum memory depth: 1 Gpts
• The maximum waveform capture rate is 800,000 wfms/s in UltraAcq® mode, 2,000,000 wfms/s in sequence mode
• 9 instrument functions: Digital Oscilloscope, Logic Analyzer (requires MSO7000X-LA and UT-M15), Function/Arbitrary Waveform Generator (option), Spectrum Analyzer, Digital Voltmeter, Frequency Counter, Protocol Analyzer, Jitter/Eye Analyzer (option) and Power Analyzer (option)
• Built-in dual-channel 60MHz function/arbitrary waveform generator. Supports loading on-screen oscilloscope data for real-time arbitrary waveform output. Additionally, it includes over 200 built-in arbitrary waveforms, enhancing its versatility and functionality.
• Parameter measurement adds histogram and line graph display
• Maximum 1 Mpts enhanced FFT, supporting the spectrum analyzer functions of Amplitude spectrum, Power spectrum, Psd, Real part, Imaginary part, Phase spectrum
• 54 kinds of parameter measurement
• Mask and limit testing is a standard function of the MSO7000X. Capture or import waveforms and use them as reference.
• Multi-channel 8-digit hardware frequency counter, supporting adjustable frequency refresh time and effective digit
• 4-digit Digital Voltmeter (DVM): DC, AC RMS, and DC+AC RMS
• 22 advanced trigger types: edge, pulse width, ramp, runt pulse, over-amplitude pulse, delay, timeout, duration, setup & hold, Nth edge, and code pattern
• Protocol trigger and decoding functions. Included: RS232/UART, I2C, SPI. Optional: CAN, CAN-FD, LIN, FlexRay, AUDIO, SENT
• Zone triggering for capturing accidental signal and observing complicated signal
• Ultra Phosphor 3.0 super phosphor display effect, up to 256 grey display
• 15.6-inch 1920x1080 HD capacitive multi-touch screen, supporting gesture control: click, slide, zoom, edit, and drag
• Multiple peripheral interfaces: USB 3.0 Host, USB 3.0 Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail, DVM), Gen Out, HDMI
• SCPI (Standard Command for Programmable Instrument)
• Built-in Webserver for accessing and controlling the instrument through a browser, supporting PC/Mobile phone device for cross-platform access to the instrument

UT18B MAX True RMS multi-meters have a compact and portable design, fast response, strong anti-interference to EMC interference, and come with standard gold-plated test leads and gold-plated fine-tipped test leads. It also features full-range 1000V input protection, making them the ideal tool for electronic and electrical engineers.

Features:

• True RMS measurement
• Compact design
• V.F.D function
• Fast measurement of Continuity
• Fast measurement of Capacitance
• Two test probes (standard & fine-tipped)
• Strong EMC anti-interference
• Full-range input protection

UT117C is a high-precision true RMS multimeter, which has AC/DC 600V voltage measurement, 10A AC/DC current measurement, LPF measurement, Bluetooth function, etc.

The main features are fast response, high precision, small size, and easy operation, and product accuracy can still be guaranteed after a 2-meter drop. It is a good tool for electronic electricians.

Features:

• High-precision: 60000 counts
• True RMS measurement
• AC/DC current: 10A
• AC/DC voltage: 600V
•  LoZ, LPF & Auto Volt function
• Audible & Visual Warning
• Bluetooth app supported
• External current clamp supported
• Compact design, easy & convenient operation
• Drop test: 2m
• Magnetic hanger supported (optional)
• Overvoltage category: CAT III 600 V

• Channels:4
• Bandwidth:350MHz
• Real time sample rate: 2.5GSa/s
• Brand new interactive experience
• Ultra-high capture rate
• Maximum memory depth up to 250Mpts
• Rich trigger function
• Full memory hardware decoding
• Area trigger
• AWG Function Arbitrary Waveform Generator
• Bode plot

UT39+ series modern digital multimeters are portable devices designed for the electrical industry. They feature overvoltage and overcurrent alarm and high voltage protection, triggered during faulty operation. UT39C+ is suitable for HVACR maintenance with its temperature measurement feature. Designed according to CAT II 1000V/CAT III 600V safety standards.

Features: 

• 1000V DC voltage measurement
• 750V AC voltage measurement
• 10A DC/AC current measurement
• Resistance/Capacitance
• hFE
• Diode/Continuity test

The new generation of UT136+ series digital multimeter has an innovative industrial design which ensures that the product can withstand a drop of 2 meters height. Large LCD screen provides a clear display and its 4 times/second sampling rate provides users with more accurate readings. UT136+ series is designed to work safely in CAT II1000V/CAT III 600V environment. 

•  Measures up to 1000V and 10A AC/DC voltage and current
•  Equipped with 3mm protective sleeve; 2 meters drop proof
•  Large LCD display; Overload alarm
•  Quick sampling rate, up to 4 times/s
•  Quick capacitor measurement (measures 1mF in 4 seconds)
•  Low power consumption and auto power saving function; long battery service life (>500hrs)

 
 
UT8805E is a 200000 (5 1/2 Digit) count benchtop digital multimeter with high precision, multi-function and full-automatic measurements for various requirements. It is Cabable of various Mathematical functions:Maximum, minimum, average, standard deviation, relative measurement, bar chart, histogram, trend chart, dB/ dBm, Pass/Fail, etc.
True 5½-digit reading resolution
Up to 5k rdgs/s sampling rate
Multiple mathematical operations
True-RMS,AC voltage range:750V,AC current range:10A
Built-in thermocouple cold junction compensation
Arbitrary sensor measurement
1Gb flash memory storage which can support up to 10k data recall
With 4.3 inches TFT LCD. Pass/Fail
Support USB, GPIB, RS-232C and LAN interface; support USB-TMC, IEEE 488.2 standard, VXI11 and SCPI language
Standard power cord,USB interface cable, Test leads, Double female straight-through serial cabl, Product Warranty Card, backup fuse

UTi730E is an advanced thermal camera with Wi-Fi capability. Its large 3.5” IPS display screen can clearly display 320×240 thermal resolution 2MP visual camera, or a blended image of both. UTi730E’s 5200mAh detachable battery pack is also convenient for easy and quick battery change, allowing continuously work for long periods of time.

• 3.5”IPS display screen (640×480 Pixels)
• IR resolution: 320×240
• Temperature measurement range: -40℃to 400℃  / -40℉ to 752 ℉
• Auto alarm for high/low temperature
• Auto tracking for hot spot/cold spot
• On screen analyzer :5 Points/1 Line/3 Rectangles/3 Circles
• Image capture
• Digital camera resolution: 2MP
• Digital zoom: 2x, 4x
• Image modes: Thermal,Visual image,Fusion,PIP
• Color palettes: 7(White hot, Black hot, Red hot, Ironbow, HC Rainbow, Rainbow, Lava)
• Isotherm(Auto/Ratio/Below/Above/Section/Manual)
• LED flashlight
• Wi-Fi connection through Mobile App
• QR Code – photo management
• PC software: analysis and real-time image projection
• 5200mAh replaceable battery pack (Type-C rechargeable)
• 1/4”tripod mounting hole
• IP54
• 2m drop proof

UTi716S is equipped with a 12μm infrared detector with 160×120 pixels and 2MP digital camera, combined with Super resolution function and self-developed T-Mix auto-adaptive dual-light fusion algorithm technology for generating high-definition IR images with visible details. Its extended temp. measurement range and the built-in LED light & laser pointer meet more application scenarios. 4-button and light-weight design make inspection work easily. Widely used in HVAC, Automotive inspection and electric utility.

Features:

• 160×120 pixels / 12μm infrared detector
• Temp. measurement range from -20℃ to 550℃
• 2MP digital camera
• Self-developed T-Mix auto-adaptive dual-light image fusion algorithm technology
• Super resolution is supported
• Multi-languages OS
• With LED light & Laser pointer
• IP54 and withstand the drop of 2m height

8-channel output, a variety of probes are available

• 8H output,Thermocouple input: J, K, T, E, S, N, B, R,standard K-type probe

Rich display function

• With intuitive readings, curve graph display, bar graph display

Upper and lower limit discrimination display

• The temperature upper and lower limit over-limit alarm can be set, and the over-limit reading color change warning can be set, the upper and lower limits can be set for each channel of temperature data

Features

• Channels: 8
• Temperature Range: -200℃~1800℃
• Resolution: 0.1℃
• Scanning Speed: 2 times/s
• Thermocouple: J,K,T,E,S,N,B,R
• Connectivity: RS-232、USB Device
• Size: ½ 2U
• Display: 4.3'' TFT LCD

Models in UT116 Series: UT116A, UT116C

The UT3200 Series Multi-channel Temperature Loggers contain 4 models: UT3208,UT3216,UT3224 and UT3232.which corresponds with thermocouple testing channels of 8, 16, 24 and 32. With 4.3-inch LCD screen, this Series is compatible with multiple temperature sensors, can collect multichannel temperature data simultaneously. The UT3200 Series has have advantages of upper/lower limit alarm, fast respond, stable data transmission and thermocouple short-circuit detection.

• Channels – 16
• Temperature Range – (-200℃~1800℃)
• Resolution – 0.1℃
• Scanning speed – 2 Times/s

UT345A is an intelligent ultrasonic thickness gauge that adopts the latest high-performance and low-power consumption microprocessor technology. Based on the principle of ultrasonic measurement, it can measure the thickness and sound velocity of metal and other materials. It can detect the thinning of pipes and pressure vessels after corrosion, and can make accurate measurements of plates and machined parts. The gauge can be widely used in petroleum, chemical, metallurgy, shipbuilding, aviation, aerospace, and other fields.

3.7V 2000mAh lithium battery

Auto calibration

300 groups of data storage

Measurement range 1.00~300.00mm

Sound velocity range (1000～9999) m/s

Unit mm/in

High-sensitive probe

Buzzer alarm

Multiple materials selection

Main functions: single measurement, continuous measurement, alarm, sound velocity measurement, auto-calibration

UT681 series handheld cable testers can be used to fast check if Ethernet/telephone/BNC/HDMI cables are conducting, short-circuit, crossed or open-circuit. They are ideal tools for LED status display

• Auto check of open/short/crossover circuit
• Single key operation
• Manual/auto power off (after10-minute inactivity)
• Low battery indication
• Power supplied by 9V battery technicians to install, maintain and inspect week current system circuit.

A61 is an IP65 rated thermometer with FDA certified stainless steel probe. It is equipped with a protective shell to prevent accidental skin puncture and burning. With its portable pen-like design, clear backlight display, and auto power off functions, A61 is a useful temperature measurement tool for cooking, refrigeration, heating, food processing and other applications.

• LED alarm
• Data hold
• Pen-type design
• MAX/MIN Real-time
• IP65
• Unit conversion

The UTG1000X series has precise and stable waveform output with a resolution as low as 1μHz. It is an economical, high-performance, and multi-functional function/arbitrary waveform generator. Accurate, stable, clean, low-distortion output signals can be generated. With convenient operation, superior technical indicators and humanized graphic display, it is a multi-purpose device that meets the needs of learning, testing and production.

• Multiple analogue and digital modulation function: AM, FM, PM, ASK, FSK, PSK and PWM
• Supporting sweep frequency and pulse string output.
• Arbitrary wave can generate by the upper software computer.
• 7-bit hard frequency meter
• Standard USB Host and USB Device
• 4.3-inch-high resolution TFT LCD
• Max. Output frequency: 40MHZ
• Sample rate: 200msa/s
• Vertical resolution: 16bit
• Arbitrary wave length: 4kpts
• Channels: 2

The Uni-T UT-P08A is a passive probe designed for use with oscilloscopes. It features a probe attenuation of 10:1, a bandwidth of 350MHz, and can handle voltages up to 600Vpp for providing a reliable means of testing electronic devices.

Features:

• Attenuation ratio: 10:1
• Bandwidth: 350MHz
• Working voltage: 600Vpp
• Compatible with MSO/UPO3000E Oscilloscopes

UT3200+ series multi-channel temperature tester has 6 models of 8, 16, 24, 32, 40, 48 channels. 4.3-inch LCD color screen display, beautiful interface. Multiple channels of temperature data can be collected at the same time. The response speed is fast and the data is stable. It is suitable for multi-point temperature monitoring by manufacturers and quality inspection departments in industries such as home appliances, motors, electric heating appliances, thermostats, transformers, ovens, thermal protectors, power supplies, lighting, electric power, and LEDs.

• Channels:8
• Scanning Speed:10rdgs/s
• Temperature Range:-200~1800ºC

UT520 series can perform precise 3-wire and simple 2-wire earth resistance measurement for power and electrical systems, lightning protection equipment, and ground system of all electrical equipment.
Earth Resistance ()
0 40, (2%+20)
0 400, (2%+3)
0 4000, (2%+3)
Includes High Quality- Original UNI-T Earth Testing Kit

UT381A is a safe and reliable digit light meter with wide range measurement, widely used in lighting applications, laboratory, office, street lights construction, commercial venue and others.

• Wide measurement range, 0~400000 lx
• Probe of integrated, split and rotatable design
• Data storage
• Bluetooth APP connection supported
• Colour Correction Coefficient(CCF)
• Real-time display

Includes conformity/ Calibration report

UT372D 2-in-1 Tachometer is a reliable and safe tachometer, which combines contact and non-contact measurement modes. It is mainly used to measure Revolutions Per Minute(RPM) , frequency, surface velocity and length in the fields of motors, fans, automobiles, papermaking, etc.

Features:

• Contact and non-contact measurements
• MAX/MIN/AVG/HOLD
• Rotatable LCD backlight screen
• Unit conversion
• Bluetooth APP
• Auto power off
• Data storage
• Two measurement buttons

UT270 series can quickly and safely measure the grounding system without disconnecting circuit ground lines or the need of auxiliary electrodes. It can measure resistance from 0.01Ω with a resolution of 0.001Ω.

• Auto range
• Data hold
• Data recall
• LCD backlight
• Resistance limit alarm
• Low battery indication
• Auto calibration

The UT715 multifunction loop process calibrator, it measures and sources loop current and voltage. It is designed with 0.02% accuracy, adjustable backlight and auto power off. It is a powerful tool for calibration, repair, and maintenance of mA loops.

Features of UT715 Multifunction Loop Process Calibrator

• Certifications: CE, UKCA
• Step/ramp functions
• Source and measure accuracy up to 0.02%
• Rechargeable battery
• Contrast adjustment
• Auto power off (Time adjustable)
• Stores and recalls setups
• USB communication
• Provides 24V loop power to transmitter while conducting mA current measurement at the same time
• Standard accessory  Test lead, USB cable, power adapter, English manual

The UT725 multifunction process calibrator combines with temperature process calibrator and loop process calibrator function. You can easily measure and source most of the process parameter: mA, volts, temperature, frequency, ohms in one tool.

• Step/ramp functions
• Source and measure accuracy up to 0.02%
• Rechargeable battery
• Contrast adjustment
• Auto power off (Time adjustable)
• Stores and recalls setups
• USB communication
• Simultaneously measure and output different process signal in real time
• Pressure measure with specified pressure modules, and sourcing pressure
• Provides 24V loop power to transmitter while conducting mA current measurement at the same time

The UT5140 is a next-generation AC/DC ground bond tester featuring a 4.3-inch TFT-LCD display in a compact and lightweight design. With a maximum test current of 40 A, it delivers stable current output for both AC and DC ground testing and adopts a four-terminal configuration to ensure accurate and efficient measurements. Its adjustable open-circuit voltage enhances safety for both operators and the device under test. Equipped with versatile communication interfaces, the UT5140 is an ideal solution for automated systems and production line testing

• Voltage Range 3.00 V- 8.00 V
• Impedance Range 0 mΩ - 600 mΩ
• Current Range 1.00 A- 40.00 A

• UT665 borescope displays clear images through a flexible camera probe. It is useful for viewing details of automobiles engine, pipelines, inner building walls, drain pipes, and other hard to reach locations. It is designed with 4-level adjustable LED lights and 180 degrees viewing angle IP67 probe, which can be submerged into water.

LM320 series digital angle meters are used to measure the precise angle in a variety of applications, designed with 2/4 sided magnetic bottom, and  two-side laser design (LM320B) makes the measurement more accurate and convenient! This series can be used in manufacturing, home decoration/DIY, and other fields requiring accurate angle measurements.

• Relative / absolute measurement
• 360°comprehensive measurement
• Data hold
• Portable and lightweight
• Unique laser design

UT116C SMD Tester

  Battery measurement (10mA)
  Resistance, capacitance ( up to 100mF), continuity, diode measurement
  The pen can be rotated by 180°, which is convenient for reading and diode/LED
  Zener diode polarity test

The UNI-T UTE310 is a high-accuracy digital power meter offering top-tier performance for measuring voltage, current, and power. With a 4.3-inch full-color display and advanced waveform visualization, this tool provides a streamlined user experience. The wide measurement range (25µA–20A / 75mV–600V) and broad 300kHz bandwidth make the UTE310 perfect for R&D, testing, and production environments.

4.3-inch LCD Display

A vivid 4.3-inch full-color TFT LCD allows you to view three display interfaces simultaneously, providing more parameter information in a single glance. This large, crisp display reduces the need for multiple tools and enhances overall efficiency during testing and analysis.

Sample Rate of 1MSa/s (1MHz)

With a high sampling rate of 1MSa/s, the UTE310 captures even the most transient signals with exceptional accuracy. This precision is invaluable for engineers working on fast-changing or dynamic electrical systems where reliable measurements are critical to performance analysis.

300kHz Bandwidth

The UTE310 boasts a 300kHz bandwidth, allowing you to capture higher-frequency signals. This ensures your measurements are comprehensive and able to handle a wide range of signals for diverse applications, from high-performance R&D environments to complex industrial testing.

50th Harmonic Measurement

Engineers can analyze up to the 50th harmonic, fully supporting IEC61000-4-7 standards. This is especially useful when analyzing equipment that produces harmonic distortion, such as motors or power converters. The built-in harmonic analysis provides crucial insights into system performance and efficiency.

Real-Time Waveform Display

The UTE310 offers real-time waveform visualization of voltage and current, helping engineers quickly identify abnormalities. With automatic peak-to-peak value measurement, engineers can better understand dynamic behaviors and ensure systems meet desired specifications.

External Input

For applications requiring higher voltages or currents, external sensors can be connected to the UTE310, significantly extending its measurement range. This feature makes the UTE310 adaptable to a broader spectrum of engineering tasks, from high-power industrial systems to delicate electronics testing..

Integral Function

The power meter’s integral function supports both average active power and current integration, which can be utilized for long-term power consumption testing. This is crucial for R&D engineers focused on optimizing energy-saving technologies and improving overall device efficiency.

Average Function

When measuring fluctuating signals, activating the average function stabilizes readings even at higher refresh rates. This feature minimizes noise and provides more consistent measurements, offering engineers clear, reliable data to work with.

Jump Configuration

Speed up the measurement process by skipping irrelevant ranges based on past experience. Jump configuration enhances the automatic range feature by reducing unnecessary measurements, allowing for quicker analysis and faster results.

D/A Output for Real-Time Control

The UTE310’s D/A output enables real-time communication with control systems. By sending measured values directly to a test platform, engineers can make real-time adjustments, monitor performance, and automate controls for superior system management.

UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard.
These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments

- RCD test, LCD display
- very solid construction
- dust and water proof (IP65 Rated)
- voltage indication via LED diodes
- integrated LED light
- phase rotation test
- continuity buzzer
- polarity detection

These characteristics apply to a UT-P00 series probe installed on a specified oscilloscope. When used with another instrument. The oscilloscope must have an input impedance of 1 MΩ. The instrument must have a warm-up period of at least 20 minutes and be in an environment that does not exceed the limits.

• Probe factor:(10:1)
• Bandwidth: 500MHz.
• voltage:600Vpp

High-performance current probe with a range of 20A AC/DC, supporting frequencies from DC to 25MHz. Features a conversion ratio of 100mV/A for accurate and reliable current measurements across a wide frequency spectrum. 

• Current probe Range :20A AC/DC
• Frequency: DC~25MHz
• Conversion ratio:100mV/A

The second generation UT658 series USB testers can inspect USB chargers, portable power sources, USB type A and C cables and other electronic charging devices. This series is designed to be precise, reliable, stable, and portable. 

Features 

• Type-A/C interface
• CE certification
• 10 sets of data storage
• Loop equivalent resistance measurement (1-480Ω)
• Same screen shows voltage, current, power, capacity, etc.
• Support fast charge protocol