Atal Tools

 
UPO2000 series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T's original Ultra Phosphor technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster. It is an oscilloscope designed for general design / debugging / testing needs in many fields, such as communication, semiconductor, computer, instrumentation, industrial electronics, consumer electronics, automotive electronics, on-site maintenance, R & D / education, etc. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and low wave signals.  

Waveform capture rate up to 1,000,000 wfms/s 

Support Bode Plot loop test and analysis function 

Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames

Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)

4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.

Auto measurement of 36 waveform parameters

Multi-Scopes supports multi-channel independent trigger and fluorescent display

DVM supports multi-channel independent AC / DC true RMS measurement

Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout,    duration, setup/hold, Nth edge and pattern trigger

Area trigger function, which can be used to capture accidental signals and observe complex signals

Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay

Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display

8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.

Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA

Support SCPI programmable instrument standard commands

Support web access and control

Bandwidth 200MHz

Channels 4

Real- Time Sample Rate:  2 GSa/s

MAX. Memory Depth 56 Mpts

The UPO2000 series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T's original Ultra Phosphor technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and low wave signals.

• Waveform capture rate up to 1,000,000 wfms/s 
• Support Bode Plot loop test and analysis function 
• Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames
• Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)
• 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.
• Auto measurement of 36 waveform parameters
• Multi-Scopes supports multi-channel independent trigger and fluorescent display
• DVM supports multi-channel independent AC / DC true RMS measurement
• Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout, duration, setup/hold, Nth edge and pattern trigger
• Area trigger function, which can be used to capture accidental signals and observe complex signals
• Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
• Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display
• Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA
• Support SCPI programmable instrument standard commands
• Support web access and control
• 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.
• Bandwidth 100MHz
• Channels 2
• Real- Time Sample Rate:  2 GSa/s
• MAX. Memory Depth 56 Mpts

• Waveform capture rate up to 1,000,000 wfms/s 
• Support Bode Plot loop test and analysis function 
• Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames
• Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)
• 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.
• Auto measurement of 36 waveform parameters
• Multi-Scopes supports multi-channel independent trigger and fluorescent display
• DVM supports multi-channel independent AC / DC true RMS measurement
• Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout,    duration, setup/hold, Nth edge and pattern trigger
• Area trigger function, which can be used to capture accidental signals and observe complex signals
• Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
• Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display
• 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.
• Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA
• Support SCPI programmable instrument standard commands
• Support web access and control
• Bandwidth 100MHz
• Channels 4
• Real- Time Sample Rate:  2 GSa/s
• MAX. Memory Depth 56 Mpts

The MSO2000 series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T's original Ultra Phosphor technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and low wave signals.

• Waveform capture rate up to 1,000,000 wfms/s 
• Support Bode Plot loop test and analysis function 
• Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames
• Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)
• 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.
• Auto measurement of 36 waveform parameters
• Multi-Scopes supports multi-channel independent trigger and fluorescent display
• DVM supports multi-channel independent AC / DC true RMS measurement
• Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout, duration, setup/hold, Nth edge and pattern trigger
• Area trigger function, which can be used to capture accidental signals and observe complex signals
• Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
• Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display
• Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA
• Support SCPI programmable instrument standard commands
• Support web access and control
• 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.
• Bandwidth 100MHz
• Channels 4
• Digital Channels 16
• Real- Time Sample Rate:  2 GSa/s
• MAX. Memory Depth 56 Mpts

• Integrated with oscilloscope,  frequency counter, voltmeter and FFT spectrum analyzer.
• 100 MHz bandwidth
• 1.25GSa/s real-time sampling rate.
• Channel 4
• 50M storage depth, up to 700,000wfms/s waveform refresh rate, ensuring clear signal capture.
• 12-bit Vertical Resolution, vertical sensitivity is 500uV/div-10 V/div.
• 1M- point FFT analysis ensures accurate frequency component display.
• Rich triggering: edge, video, pulse width, slope, under-amplitude, over-amplitude, timeout, Nth edge, logic andRS232/UART,l2C, SPI, CAN,LIN; 2-channel hardware decoding:RS232 / UART,I2C,SPIl,CAN,LIN.
• Support for external devices like mouse and keyboard, greatly enhancing efficiency.
• Optional wireless module (Wi-Fi/Bluetooth) supports network printers.
• Ultra-thin design saving valuable workspace.
• 7-inch touchscreen with multi-touch support for an enhanced interactive experience.

• Integrated with oscilloscope,  frequency counter, voltmeter and FFT spectrum analyzer.
• 70 MHz bandwidth
• 1.25GSa/s real-time sampling rate.
• Channel 4
• 50M storage depth, up to 700,000wfms/s waveform refresh rate, ensuring clear signal capture.
• 12-bit Vertical Resolution, vertical sensitivity is 500uV/div-10 V/div.
• 1M- point FFT analysis ensures accurate frequency component display.
• Rich triggering: edge, video, pulse width, slope, under-amplitude, over-amplitude, timeout, Nth edge, logic andRS232/UART,l2C, SPI, CAN,LIN; 2-channel hardware decoding:RS232 / UART,I2C,SPIl,CAN,LIN.
• Support for external devices like mouse and keyboard, greatly enhancing efficiency.
• Optional wireless module (Wi-Fi/Bluetooth) supports network printers.
• Ultra-thin design saving valuable workspace.
• 7-inch touchscreen with multi-touch support for an enhanced interactive experience.

• Integrated with oscilloscope,  frequency counter, voltmeter and FFT spectrum analyzer.
• 100 MHz bandwidth
• 1.25GSa/s real-time sampling rate.
• Channel 2
• 50M storage depth, up to 700,000wfms/s waveform refresh rate, ensuring clear signal capture.
• 12-bit Vertical Resolution, vertical sensitivity is 500uV/div-10 V/div.
• 1M- point FFT analysis ensures accurate frequency component display.
• Rich triggering: edge, video, pulse width, slope, under-amplitude, over-amplitude, timeout, Nth edge, logic andRS232/UART,l2C, SPI, CAN,LIN; 2-channel hardware decoding:RS232 / UART,I2C,SPIl,CAN,LIN.
• Support for external devices like mouse and keyboard, greatly enhancing efficiency.
• Optional wireless module (Wi-Fi/Bluetooth) supports network printers.
• Ultra-thin design saving valuable workspace.
• 7-inch touchscreen with multi-touch support for an enhanced interactive experience.

The UNI-T UPO1152HD is a 12-bit high-resolution oscilloscope designed for engineers who need greater bandwidth for precision signal analysis. With 150 MHz bandwidth, 1.25 GSa/s sample rate, and 100 Mpts memory depth, it offers clean acquisition and deep capture. This 2-channel model integrates power analysis, protocol decoding, and advanced spectrum tools—all powered by UNI-T’s Ultra Phosphor 3.0 engine and delivered in a compact USB-C form factor with a 7" touchscreen.

Key Features

• 150 MHz Bandwidth – Ideal for high-speed embedded, analog, and power validation
• 2 Analog Channels – Streamlined form factor with dual-channel precision
• 12-bit Vertical Resolution – Capture subtle detail with 16× the resolution of 8-bit scopes
• 1.25 GSa/s Sample Rate – Supports accurate measurement of fast edges and clocks
• 100 Mpts Memory Depth – Long waveform capture at full speed and resolution
• Ultra Phosphor 3.0 – Up to 1,000,000 wfms/s with 256-color intensity grading
• Integrated Power Analysis – Built-in ripple, harmonics, SOA, switching loss, and more
• 1M-point FFT – Full-spectrum view with waterfall and peak markers
• Protocol Decoding – UART, I²C, SPI, CAN, LIN with trigger and event view
• 6-in-1 Functionality – Oscilloscope, spectrum analyzer, DVM, counter, logic/protocol tools
• USB-C PD Input – Compatible with portable and benchtop power setups
• Remote Access – Control via SCPI, browser, or automated scripts

Package Contents

UPO1152HD Oscilloscope

2 × UT-P05 Passive Probes (200 MHz)

USB 2.0 Cable (UT-D14)

Type-C PD Power Adapter

User Manual & Calibration Certificate

UTD2000CL series is an economical bench-type digital storage oscilloscope, meeting needs of basic measurements. The simple and clear front panel design provides convenient operations for users.

Bandwidth    25MHz
Channels    2
Sampling rate    250MS/s

Feature：

• 4CH oscilloscope+EXT+AFG+DVM+auto range function
• 250MHz bandwidth，
• Minimum range 500μV /div，
• 1GS/s sample rate.
• Over 32 types of auto measurement function Advanced digital trigger system, high trigger sensitivity. Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc. Serial bus triggering and decode,  Bus protocol information can be quickly and intuitively displayed in table form.
• Function/arbitrary signal generator25MHz,12BitS resolution, 200MHz DDS, ARB/square wave/sine wave/triangular wave/trapezoidal wave/impulse wave/DC etc., easy to simulate the sensor. Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update. Support a variety of SCPI remote control command Support optional RS232 port, LAN port. (Optional)Stable and reliable quality, sturdy and durable.

Feature:

• Support 1MΩ/50Ω impedance switching to ensure signal integrity;
• The sampling rate of the entire system is 2GSa/s, with a maximum bandwidth of 350MHz;
• Built in arbitrary waveform generator, capable of outputting 5 standard waveforms, supports custom arbitrary waveform output, and supports burst output;
• Protocol Trigger: Comes with five standard serial protocol triggers and decoding, supporting protocols including UART, LIN, CAN, SPI, IIC, making it easy to analyze serial bus data;
• 32 automatic measurement and threshold measurement functions, with test results supporting statistical analysis;
• Two sets of digital voltmeter functions and hardware frequency meter functions;
• Standard SCPI remote control instructions, convenient for users to build testing systems;
• Save and export function, which can save settings CSV, Information such as images, reference waveforms, and waveforms;
• Four sampling methods: normal, average, peak, and high-precision;
• 14 operating languages, supporting over 90% of countries and regions worldwide;
• There are two cursor measurement modes: manual and tracking, and the Math function also supports cursor measurement;
• 500uV-10V vertical measurement gear, 300VCAT Ⅱ withstand voltage input;
• FFT scale display, convenient for reading results;
• Manual, single time, one click AUTO measurement, simple and fast waveform measurement;
• XY mode supports dual window display, making it easy to understand waveform phase changes;

Package:

• 1 x Oscilloscope;
• 1 x oscilloscope probe;
• 1 x power cable;
• 1 x USB cable;