Atal Tools

The UTL8200 series electronic load is equipped with a 2.8-inch LCD display, which is convenient and simple to operate, stylish and generous, stable in operation, has a wide power measurement range, voltage and current measurement speeds up to 40kHz, and a test resolution of up to 1mV/1mA, with rich test functions and modes, and standard RS-232C communication interface, flexibly meet various on-site test conditions, and realize seamless connection with automated production lines and automatic test systems (ATS).
 
UTL8211: Single channel 150V /40A, 400W
CC/CV/CR/CP four basic modes
1mV/1mA high resolution
Dynamic current test
Voltage and current measurement speed up to 40kHz
Multi-mode battery discharge test
List mode, support automatic test
Independent short circuit test function
Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection etc.
Supporting PC software to realize remote operation and monitoring
Power-off memory function
Intelligent temperature control fan
Standard RS-232C interface, support SCPI protocol

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The UTL8200 Series is designed for users requiring a DC load with a compact form factor which is widely used in basic applications such as product production line and maintenance. Small size, easy operation, rich testing functions and modes, support for dual-channel independent testing,  the standard RS-232 interfaces for remote communication to meet your diversified test requirements, easy to connect seamlessly with automatic production line and  automatic test system (ATS). With a wide range of power measurement,  voltage and current measurement speed up to 40kHz, test resolution up to 1mV/1mA, the UTL8200 series is a cost-effective DC load with performance specifications that rival any instrument in its class.

Additional Information:

• Delivery Time: Same day
• Packaging Details: Standard Packing

UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively. These devices can operate in frequency range of 15~400Hz.

UT261 are durable devices which can withstand impact from 2 meter's height.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard accessories Battery (UT261B), test lead with alligator clip x 3 Standard individual packing Gift box, English manual, carrying bag

150V VOLTAGE 30A CURRENT 300W TOTAL POWER 0.1mV/0.1mA RESOLUTION ½ 2U SIZE RS232,(Optional RS232-RS485, RS232-USB) CONNECTIVITY

4.3 inch LCD screen display 4.3 inch LCD screen display Resolution: 0.1mV/0.1mA Voltage test range: 0~150V Current test range: 30A Power test range: 0~300W

Four basic test modes Four basic working modes: CC/CV/CR/CP,Multiple protection functions Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection, etc.

Rich test mode In order to meet diversified test requirements, UTL8500 series electronic loads provide more test modes for users to choose, including dynamic test, list test, combination test, OCP/OPP test, CR-LED test, battery test, load effect, OVP test , Short circuit, time test and other modes.

Screenshot function, list call and system upgrade Press the [Screenshot] button to save the current screen image to the USB flash drive,or save the frequently used list test files in Flash or USB flash drive, so that they can be called when needed next time, and the system can be upgraded quickly through the USB flash drive.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UT345A is an intelligent ultrasonic thickness gauge that adopts the latest high-performance and low-power consumption microprocessor technology. Based on the principle of ultrasonic measurement, it can measure the thickness and sound velocity of metal and other materials. It can detect the thinning of pipes and pressure vessels after corrosion, and can make accurate measurements of plates and machined parts. The gauge can be widely used in petroleum, chemical, metallurgy, shipbuilding, aviation, aerospace, and other fields.

• 3.7V 2000mAh lithium battery
• Auto calibration
• 300 groups of data storage
• Measurement range 1.00~300.00mm
• Sound velocity range (1000～9999) m/s
• Unit mm/in
• High-sensitive probe
• Buzzer alarm
• Multiple materials selection
• Main functions: single measurement, continuous measurement, alarm, sound velocity measurement, auto-calibration

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UT8805E is a 200000 (5 1/2 Digit) count benchtop digital multimeter with high precision, multi-function and full-automatic measurements for various requirements. It is Cabable of various Mathematical functions:Maximum, minimum, average, standard deviation, relative measurement, bar chart, histogram, trend chart, dB/ dBm, Pass/Fail, etc.

• True 5½-digit reading resolution
• Up to 5k rdgs/s sampling rate
• Multiple mathematical operations
• True-RMS,AC voltage range:750V,AC current range:10A
• Built-in thermocouple cold junction compensation
• Arbitrary sensor measurement
• 1Gb flash memory storage which can support up to 10k data recall
• With 4.3 inches TFT LCD. Pass/Fail
• Support USB, GPIB, RS-232C and LAN interface; support USB-TMC, IEEE 488.2 standard, VXI11 and SCPI language
• Standard power cord,USB interface cable, Test leads, Double female straight-through serial cabl, Product Warranty Card, backup fuse

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard power cord,USB interface cable, Test leads, Double female straight-through serial cabl, Product Warranty Card, backup fuse

Additional Information:

• Delivery Time: Same Day
• Packaging Details: - Standard accessories Batteries, test leads, Themocouple - Standard individual packing Gift box, Carring bag, English manual

UT200 series are 6000-count digital clamp meters with auto range, large LCD, true RMS, autoscale memory, and NCV functions. They conform to CAT III 1000V/CAT IV 600V safety rating andcerti???ed by CE/ETL. The  UT207B come with LoZ mode for eliminating ‘ghost ’voltage, LPF ACV function for measuring INV and VFD voltage, and inrush current modefor capturing transient current. 

• Flashlight button: Short press thisbutton to turn on/o  the  ashlight.
• Inrush current capture
• NCV Multi-Segment Display and audio/visual alarm
• True RMS/Auto backlight
• NCV/Function retention

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Test leads, batteries

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessories: Test Lead, Point Contact Temperature Probe - Standard Individual Packing: Box, Carrying bag, Manual

UT116C SMD Tester

  Battery measurement (10mA)
  Resistance, capacitance ( up to 100mF), continuity, diode measurement
  The pen can be rotated by 180°, which is convenient for reading and diode/LED
  Zener diode polarity test

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard accessories Battery - Standard individual packing Gift box, English manual

•  Large 9999 display with 30-segment analog bar graph
• Test Voltages: 500V, 1000V, 2500V, 5000V
• Test Voltage Accuracy: 0% to 20%
•  PI/DAR measurements
•  Comparison, upper and lower limit functions
•  Continuous measurement mode
•  Auto power off
• 18-group data storage
•  Backlight
•  Auto current discharge and high-voltage output alarm
•  Time measurement mode, auto measure within 15 minutes
•  Low battery and over range indications

Additional Information:

• Delivery Time: Same Day
• Packaging Details: 2pcs of one plug test lead to one alligator clip (black and green), 1pcs of two plugs test lead to one alligator clip (red), batteries, USB cable power adaptor

UT343D Coating Thickness Gauge can measure coating thickness on ferrous and non-ferrous materials. This device is designed with a unique quick test feature, which allows users to set thickness range and using a 3-color LED and audio alarm to quickly determine if coating being tested falls within the preset range, greatly increasing work efficiency.
This CE certified device can store up to 500 sets of data for further analysis through the PC analytical software that is included.    
 

Measuring range             0~1250um

Accuracy             ±(3%H+1)um

Resolution         0.1um (0~99.9um); 1um (100~1250um)

Measurement method  Single/Continuous

Measurement mode      Max/Min/Avg

Metal type         Ferrous/ non-ferrous

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard accessories Micro USB interface cable, standard piece, batteries, cloth bag Standard individual packing box, English manual

UT343A is used to measure the thickness of the plated and coated sheet on ferrous/non-ferrous, it has the large range up to 1750um, which is widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and also able to work steadily in workshop and outdoor.
Data storage: 199 groups
Measurement method: Single/Continuous
Max/Min/Avg
Unit conversion (um/mil）
Rotatable screen
LED/Buzzer alarm
Auto power off
 

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

8-channel output, a variety of probes are available

• 8H output,Thermocouple input: J, K, T, E, S, N, B, R,standard K-type probe

Rich display function

• With intuitive readings, curve graph display, bar graph display

Upper and lower limit discrimination display

• The temperature upper and lower limit over-limit alarm can be set, and the over-limit reading color change warning can be set, the upper and lower limits can be set for each channel of temperature data

Features

• Channels: 8
• Temperature Range: -200℃~1800℃
• Resolution: 0.1℃
• Scanning Speed: 2 times/s
• Thermocouple: J,K,T,E,S,N,B,R
• Connectivity: RS-232、USB Device
• Size: ½ 2U
• Display: 4.3'' TFT LCD

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UNI-T’s UT501A is a 2000-count auto range digital insulation resistance tester with low resistance test, high voltage and low battery indication.

- Test Voltage: 100V/250V/500V/1000V
- Display Count: 1999, LCD Backlight
- Auto Range
- Low Battery Indication
- Alarm Indication and Buzzer
- High Voltage Indication
- Overload Indication
- Auto Discharge
- Test Voltage Vice Display

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessories: Test Lead, Probe, Alligator Clip, Batteries, Carrying Bag, Gallus

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard individual packing Gift box, Carrying bag, English manual

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessories Batteries, Test Leads

UT510 series testers can measure insulation resistance of large transformers, generators, high-voltage motors and more. UT510 series can also measure PI, DAR and other important specifications. Measured data can then be analyzed through PC software.

Test Voltage: 100V/250V/500V/1000V
10Gohm
Large 9999 display with 30-segment analog bar graph

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessories: 2pcs of one plug test lead to one alligator clip (Black and Green), 1pcs of two-plug test lead to one alligator clip (Red), Batteries Warranty: As per UNI-T Warranty Policy- 6 Months

UT520 series can perform precise 3-wire and simple 2-wire earth resistance measurement for power and electrical systems, lightning protection equipment, and ground system of all electrical equipment.
Earth Resistance ()
0 40, (2%+20)
0 400, (2%+3)
0 4000, (2%+3)
Includes High Quality- Original UNI-T Earth Testing Kit

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessories: Batteries, carrying bag, test lead, simple test lead, test probe Warranty: As per UNI-T warranty policy

UT500 series insulation testers are used to measure the insulation resistance of electrical equipment and household appliances. This is done by measuring the insulation resistance between electrical circuits or between circuits and ground. Itt can measure insulation resistance, AC voltage, low resistance, PI (Polarization Index) and DAR (Dielectric Absorption Ratio)

• Test Voltage: 500V/1000V/2500V
• 2000 count LCD display, overload indication, backlight
• AC voltage measurement, auto power off
• Auto discharge
• Continuous measurements mode, red warning light and buzzer function
• Continuous low resistance measurement
• PI and DAR measurement, auto resistivity calculation
• Low resistance returning to zero function to improve accuracy
• EN61557-1:2007, EN61557-2:2007, EN61557-4:2007

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

● True RMS

● LCD backlight

● Large screen and display digits

● 60mF large capacitance measurement (UT202A+/UT204+)

● Neutral/live wire test (UT202A+/UT204+)

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

LM320 series digital angle meters are used to measure the precise angle in a variety of applications, designed with 2/4 sided magnetic bottom, and  two-side laser design (LM320B) makes the measurement more accurate and convenient! This series can be used in manufacturing, home decoration/DIY, and other fields requiring accurate angle measurements.

• Relative / absolute measurement
• 360°comprehensive measurement
• Data hold
• Portable and lightweight
• Unique laser design

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

Features of UT200+ Series 400A/600A Digital Clamp Meters

● True RMS

● LCD backlight

● Large screen and display digits

● 60mF large capacitance measurement (UT202A+/UT204+)

● Neutral/live wire test (UT202A+/UT204+)

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

- Range 30~130dB
- Accuracy ±1.5dB
- Frequency response 31.5Hz~8kHz
- Resolution 0.1dB
- Sampling rate: fast 125ms, low 1000ms
- Weighting Curve: A type
- Power: 1.5V Battery (AAA*3)
- LCD Size: 32x26mm
- Weight: 116g
- Product Size: 150x52x27mm

Additional Information:

• Delivery Time: Same day
• Packaging Details: - Data Hold - Auto Power Off (5mins/disable) - Low Battery indication - MAN/MIN Mode - LCD Backlight - Over-load protection

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessaries Test Leads, Output Cable,Tool Box

UT270 series can quickly and safely measure the grounding system without disconnecting circuit ground lines or the need of auxiliary electrodes. It can measure resistance from 0.01Ω with a resolution of 0.001Ω.

• Auto range
• Data hold
• Data recall
• LCD backlight
• Resistance limit alarm
• Low battery indication
• Auto calibration

Additional Information:

• Packaging Details: Standard Accessories

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UT501C Insulation Resistance Tester, with their new design, large scale integrated circuit and digital circuit, is utilized to measure insulation resistance, alternating voltage and other parameters. The tester has features of complete functions, high accuracy, stable performances, comfortable and reliable operation. The tester is used in maintenance, test and verification for various electrical equipment and is applicable to measure insulation resistance of transformer, motor, cable, switch, electric appliances, etc.

•  Auto power off
• Self-lock funciton
• Overrange indication
• Backlight function

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessaries Test Leads, Output Cable,Tool Box, Thermocouple Standard Individual Packing Gift box, English Manual

This Instrument is well designed for on-line measurement of DC/AC leakage current and current below 600V, which adopts latest CT and digital integration technology. Slender clamp is very suitable for places full of concentrated cables (such as, electric power metering system, high-speed rail system, automobile circuit maintenance and so on). Non-contact measurement ensures operation safety. The meter has mini shape with high accuracy, stable performance and perfect functions.

• Current (A): 0mA 60.0A AC/DC, Resolution: 1mA AC/DC       
• Frequency Response      AC: 45HZ 200HZ
• RS-232 Data Transmission
• Data Storage: 99 groups

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessories Batteries, monitoring software, RS232 cable Standard Package Gift box, user manual, toolbox

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard accessories Test line, carrying bag, elastic strap

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UT682 wire tracker consists of a transmitter and a receiver, it is able to track ethernet/telephone/power cables without opening their insulation. 

UT682 can troubleshoot ethernet cables and is a recommended tool for debugging communication cables and audio/video cables.    

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard accessories 9V battery x 2, RJ11 cable, RJ45 cable, RJ11 cable with alligator clips Standard individual packing Blister, carrying bag, English manual

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard accessories USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual

UT373 is a reliable digital non-contact tachometer used to measure rotation speed of motors and other machines. This device is able to display results in RPM or revolution count. This portable device is able to safely measure rotational objects through a non-intrusive method.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The second generation UT658 series USB testers can inspect USB chargers, portable power sources, USB type A and C cables and other electronic charging devices. This series is designed to be precise, reliable, stable, and portable. 

Features 

• Type-A/C interface
• CE certification
• 10 sets of data storage
• Loop equivalent resistance measurement (1-480Ω)
• Same screen shows voltage, current, power, capacity, etc.
• Support fast charge protocol

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The UTE9800 Series intelligent electric parameter measuring instrument, also known as digital power meter, is an economical and portable measuring instrument. It is a multifunctional measuring instrument integrating voltage, current, power, power factor and frequency.

• Multiple windows simultaneously display the measured voltage, current, power, power factor, frequency, voltage crest factor and current crest factor.
• Volage Range: 3.0V~600V
• Current Range: 0.5mA~20.0A
• Frequency Range: 40Hz~130Hz；BW 5kHz
• Accuracy: ± (0.4% reading + 0.1 range + 1 digit)
• True RMS measurement. Can measure AC、DC、AC+DC
• Connectivity: RS-232/RS-485
• Automatic switching of voltage and current range to improve the measurement accuracy.
• The measurement accuracy is not affected by waveform, high reliability and long service life.
• AC/DC Type is more suitable for measurement of half wave rectifier.
• Set the upper and lower limit alarm parameters of current and power, and provide audible and visual alarm.
• With RS-232 and RS-485 serial communication interface, it is convenient to communicate with computer or PLC.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

• VA LCD display, intuitive reading, using high-speed DSP processor + phase-locked loop (PLL) for operation.
• Multiple windows simultaneously display the measured voltage, current, power, power factor, frequency, voltage crest factor and current crest factor.
• Phase locked loop (PLL) synchronization method, and the maximum harmonic analysis is 50 times.
• Automatic switching of voltage and current range to improve the measurement accuracy.
• High reliability and long service life.
• Set the upper and lower limit alarm parameters of current and power, and provide audible and visual alarm.
• With RS-232 and RS-485 serial communication interface, it is convenient to communicate with computer or PLC.
• Communication address: 1 ~ 32, baud rate: 9600、19200、38400、115200.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing