Atal Tools

SPE Series Single Channel Digital DC Power Supply

Ultra-thin body, portable and easy to use, SMPS Based

60V, 10A Adjustable-  300W constant power design, wide application range

Over voltage/over current protection

Power-on automatic output setting function, suitable for unattended occasions

Intelligent temperature control fan cooling, reduce noise

4 groups of Memory shortcut parameters for quick output

USB Device communication port, support SCPI

Constant voltage CV/constant current CC mode, effectively protect the circuit

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The XSA1036-TG spectrum analyzer from Owon has a frequency range up to 3.6 GHz and has a tracking generator, which gives this device many possibilities for this price. This spectrum analyzer has a large 10.4 "LCD screen and is equipped with advanced measuring functions.The noise that this analyzer experiences is at least -130 dBm / Hz and -150 dBm / Hz when the built-in pre-amplifier is switched on. able to produce an output frequency of 100 kHz to 3.6 GHz Furthermore, the power of this signal is adjustable from -30 dBm to 0 dBm.

Frequency Range from 9 kHz up to 3.6 GHz

150dBm Displayed Average Noise Level

Phase Noise -82dBc/Hz @1Gz and offset at 10KHz

Total Amplitude Accuracy <1.5dB

10Hz Minimum Resolution Bandwidth (RBW)

10.4 inch display

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard packing

FNIRSI 1014D is a 100 MHz bandwidth dual-channel oscilloscope with a built-in waveform generator. The oscilloscope features a high real-time sampling rate of 1 GS/s, 240 kB memory, a large 7-inch display with 800 × 480 resolution, and advanced features for capturing, analyzing, and recording measurement results. Besides, the device features high voltage protection, which ensures safe operation with signals up to 400 V. Built-in function generator generates 14 types of signals, voltage resolution is 8 bit, voltage 5 Vpeak-peak. FNIRSI 1014D is equipped with a USB interface to connect to the computer. This oscilloscope is designed for diagnostics and tuning of radio and electronic equipment.

• Compact and functional oscilloscope.
• Large 7-inch TFT display (800 × 480 pixels).
• High voltage protection: built-in module provides protection up to 400 V.
• Built-in 1 GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
• Automatic measurement function.
• Roll function.
• Lissajous figures graphic display function.
• Screen brightness adjustment function.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: includes: 2 X 100 Mhz Probes, Power Adaptor, USB Cable, Manual

OWON SDS1104 100MHz 4 Channel Digital Storage Oscilloscope, with up to 1GS/s real-time sample rates, maximum 100MHz bandwidth.

• Bandwidth : 100MHz
• 4-Channel
• Sample rate : 1GS/s
• Ultra-thin body
• 7 inch high resolution LCD
• SCPI, and LabVIEW supported

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard packing

Oscilloscope + signal generator + multimeter +data logger +frequency counter + decoder. Support Li-on battery (Optional) to implement floating test.  

The Owon XDS3204E oscilloscope is an oscilloscope with a magnificent price-quality ratio. The 3204E features a large display, good sampling rate and a large memory depth.

Because the scope features good specifications, such as the low Noisefloor, this device is suitable for many applications. With the free decoding options, many prototcols can easily be decoded. Furthermore, color grading is possible for clearer analysing of signals.

• 200MHz Bandwidth 1GS/s sample rate, 4 Channels
• 8-bit high resolution ADC
• 70,000 wfms/s waveform refresh rate
• low back ground noise
• 8 inch 800 x 600 high resolution LCD, optional multi-touch screen, more user-friendly operation experience
• SCPI, and LabVIEW supported
• multi- trigger, and bus decoding function
• multi-interface integration - USB host, USB device, USB port for PictBridge, LAN, AUX, and VGA

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

- Bandwidth 100 MHz; 2-Channel
- Sample rate : 1GS/s;Ultra-thin body
- 7 inch high resolution LCD
- SCPI, and LabVIEW supported
- Vertical Resolution (A/D) 8 bits

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The Owon SDS1022 Digital Storage Oscilloscope features 2 channels, up to 100MS/s real-time sample rates, maximum 20MHz bandwidth. The SDS1022 offers a 7-inch color LCD screen with 800x600 resolution. The SDS1022 has a ultra-thin body at only 70mm deep for portability, and it offers a 10K record length per channel of memory.
Bandwidth: 20 MHz
2-Channel
Sample rate: 100MS/s

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The Owon SDS1052 Digital Storage Oscilloscope features 2 channels, up to 500MS/s real-time sample rates, maximum 50MHz bandwidth. The SDS1052 offers a 7-inch color LCD screen with 800x600 resolution. The SDS1052 has a ultra-thin body at only 70mm deep for portability, and it offers a 10K record length per channel of memory.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The Owon XDS3064A Digital storage oscilloscope features an 12-bit high vertical resolution, restoring the waveform detail fully. The XDS3064A has a 60 MHz bandwidth, 1 GS/s sample rate and 40M record length. The XDS3062A comes standard with a 8 inch 800 x 600 high resolution LCD display. Product Features: 12-bit Resolution Vertical Resolution, restoring the waveform detail fully 60 MHz bandwidth, 1 GS/s sample rate Low background noise, vertical sensitivity in 1 mV/div - 10 V/div Based upon the 3rd generation X-visual platform Can Function as n-in-1 : data logger, multimeter, waveform generator, and digital storage oscilloscope with Optional Configurations 8 inch 800 x 600 high resolution LCD.

• 60 MHz bandwidth, 1 GS/s sample rate
• Low background noise, vertical sensitivity in 1 mV/div - 10 V/div
• Based upon the 3rd generation X-visual platform
• Can Function as n-in-1 : data logger, multimeter, waveform generator, and digital storage oscilloscope with Optional Configurations

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accessories

Additional Information:

• Packaging Details: Standard Accessories

• Oscilloscope + multimeter + waveform generator, multifunction in one
• Oscilloscope: Dual Channel (2),  Bandwidth: 70 Mhz
• 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
• 18650 lithium battery, comprehensive power consumption ≤3W, can work continuously for about 6 hours
• USB Type-C interface, support power bank, support PC software connection
• Self-calibration function
• SCPI supported, facilitate secondary development
• Includes: USB cable, Set of test leads, Probe, BNC - alligator clips cable, Power adapter, Carrying pouch

The HDS272S is a portable dual-channel oscilloscope that can also be used as a multimeter and a function generator. The meter sports a 3.5" high-contrast colour display suitable for outdoor use and it runs on a pair of 18650 batteries, good for up to 6 hours of continuous use. You can hook up the meter to a PC host with USB-C to use it with Owon's desktop software, control it via SCPI or to use it with a power bank.

Signals can be recorded and stored internally, good for up to 8k data points. Waveforms can also be stored as image or CSV, to be exported via USB to a PC host.

Besides being an oscilloscope, it independently acts as a fully featured 20,000 count True-RMS multimeter. It has the capability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed comfortably large on the display.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The HDS242 is a portable dual-channel oscilloscope that can also be used as a multimeter and a function generator. The meter sports a 3.5" high-contrast colour display suitable for outdoor use and it runs on a pair of 18650 batteries, good for up to 6 hours of continuous use. You can hook up the meter to a PC host with USB-C to use it with Owon's desktop software, control it via SCPI or to use it with a power bank.
Besides being an oscilloscope, it independently acts as a fully featured 20,000 count True-RMS multimeter. It has the capability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed comfortably large on the display.

Oscilloscope + multimeter

Oscilloscope: Dual Channel (2),  Bandwidth: 40 Mhz

3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use

18650 lithium battery, comprehensive power consumption ≤3W, can work continuously for about 6 hours

USB Type-C interface, support power bank, support PC software connection

Self-calibration function

SCPI supported, facilitate secondary development

Includes: USB cable, Set of test leads, Probe, BNC - alligator clips cable, Power adapter, Carrying pouch

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Includes: USB cable, Set of test leads, Probe, BNC - alligator clips cable, Power adapter, Carrying pouch

• Oscilloscope + multimeter + waveform generator, multifunction in one
• 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
• 18650 lithium battery, can work continuously for 3-6 hours
• USB Type-C interface, support power bank, support PC software connection
• Self-calibration function
• SCPI supported, facilitate secondary development
• 200Mhz, 1 GS/a, 2 Channel

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The Owon P4305 programmable linear lab power supply has a high resolution of 1 mV and 1 mA, and a low ripple of 1 mV. This lab power supply has a clear 4 digit LED display to show the current and voltage and is equipped with automatic active cooling.
Furthermore, it has a protection against overload, short circuit and overheating.
The P4305 is programmable via SCPI and labview on the PC and it has an RS232 connection.
Channel Output0 - 30V / 0 - 5A × 1-CH

Additional Information:

• Delivery Time: Same Day
• Packaging Details: - Small body for easy carry - 150W maximum output power - High resolution¿¿¿ 1mV / 1mA - Multi-directional cooling system with smart fan

SPE Series Single Channel Digital DC Power Supply
Ultra-thin body, portable and easy to use, SMPS Based
30V, 10A Adjustable-  200W constant power design, wide application range
Over voltage/over current protection
Power-on automatic output setting function, suitable for unattended occasions
Intelligent temperature control fan cooling, reduce noise
4 groups of Memory shortcut parameters for quick output
USB Device communication port, support SCPI
Constant voltage CV/constant current CC mode, effectively protect the circuit

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The Owon ODP 3033 belongs to the Owon ODP series and has 3 channels and output power of up to 378W.

• Channel 1: 0-30V, 0-3A
• Channel 2: 0-30V, 0-3A
• Channel 3: 6V, 3A

The Owon ODP series are accurate programmable lab power supplies with color display and very high control accuracy. These power supplies have built-in automatic cooling to prevent overheating.

The power supplies have 2 or 3 channels that are independently adjustable. The other channels provide a fixed output. This makes the power supplies very suitable for most circuits. The channels are isolated from each other resulting in low noise.

A nice feature of these programmable lab power supplies is that an arbitrary waveform can be programmed using 100 setpoints. It is also possible to store presets in 10 groups for quick switching between different voltage and current settings. As a result, this power supply can basically be used as a simple low-frequency function generator. Furthermore, the channels can be connected in series or parallel to extend the output range of this supply.

The 4" colour LCD (480 x 320 pixels) display shows the voltage, current and power.

With the data logging function, you will be able to record up to 10K groups of data and display the recorded data in a chart.

The ODP6033 has a multi-communication interface. This means that the power supply can be programmed over the USB, RS-232, or LAN interface. On top of that, the ODP 3033 also supports LabVIEW and SCPI.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The Owon ODP6033 belongs to the Owon ODP series and has 3 channels and output power of up to 378W.

• Channel 1: 0-60V, 0-3A
• Channel 2: 0-60V, 0-3A
• Channel 3: 6V, 3A

The Owon ODP series are accurate programmable lab power supplies with color display and very high control accuracy. These power supplies have built-in automatic cooling to prevent overheating.

The power supplies have 2 or 3 channels that are independently adjustable. The other channels provide a fixed output. This makes the power supplies very suitable for most circuits. The channels are isolated from each other resulting in low noise.

A nice feature of these programmable lab power supplies is that an arbitrary waveform can be programmed using 100 setpoints. It is also possible to store presets in 10 groups for quick switching between different voltage and current settings. As a result, this power supply can basically be used as a simple low-frequency function generator. Furthermore, the channels can be connected in series or parallel to extend the output range of this supply.

The 4" colour LCD (480 x 320 pixels) display shows the voltage, current and power.

With the data logging function, you will be able to record up to 10K groups of data and display the recorded data in a chart.

The ODP6033 has a multi-communication interface. This means that the power supply can be programmed over the USB, RS-232, or LAN interface. On top of that, the ODP6033 also supports LabVIEW and SCPI.

Additional Information:

• Delivery Time: Same day
• Packaging Details: Standard Packing

The Owon P6303 programmable linear lab power supply has a high resolution of 1 mV and 1 mA, and a low ripple of 1 mV. This lab power supply has a clear 4 digit LED display to show the current and voltage and is equipped with automatic active cooling.

Furthermore, it has a protection against overload, short circuit and overheating.

The P4603 is programmable via SCPI and labview on the PC and it has an RS232 connection.

Additional Information:

• Packaging Details: Standard Packing

Owon 100 MHz.,2 CH, VGA, Coloured LCD 8

• Bandwidth: 100MHz
• Sample rate: 1GS/s
• 10M record length for each channel
• Multi-function : auto-scale, Pass / Fail, and current-measuring
• LAN remote control
• Supported SCPI and labVIEW
• Smart design with easy portability
• Large 8 inch 800 x 600 pixels display
• VGA output for external display capability

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

 Bandwidth: 30 MHz
- Sample rate: 250 MS/s
- 8 inch high definition TFT display
- Ultra-thin body
- Channels: 2+1 (External), 30 Mhz

Additional Information:

• Delivery Time: Same day
• Packaging Details: Standard Packing

• 2U/3U standard embedded height
• Voltage 0-300.000V
• Current 0-34.000A
• Power 6000W
• High output resolution 1mV / 0.1mA
• Constant power output, and wider output voltage, current range
• SCOPE display mode to read voltage / current / power curve directly
• CV / CC priority, with adjustable rise/fall time
• List edit function for 50 group timed output
• Function generating function to get access to rich dynamic waveform
• Remote voltage compensation
• Parallel by multi-device to expand power range up to 128KW
• Support to save/recall 128 group application data
• 4.3" TFT LCD
• Standard RS485 communication interface, and optional dry node/analog interface
• Smart temperature sensitive fan

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard packing

• 2U/3U standard embedded height
• Voltage 0- 45.000V
• Current 0 -100.000A
• Power 2000W
• High output resolution 1mV / 0.1mA
• Constant power output, and wider output voltage, current range
• SCOPE display mode to read voltage / current / power curve directly
• CV / CC priority, with adjustable rise/fall time
• List edit function for 50 group timed output
• Function generating function to get access to rich dynamic waveform
• Remote voltage compensation
• Parallel by multi-device to expand power range up to 128KW
• Support to save/recall 128 group application data
• 4.3" TFT LCD
• Standard RS485 communication interface, and optional dry node/analog interface
• Smart temperature sensitive fan

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

• 2U/3U standard embedded height
• High output resolution 1mV / 0.1mA
• Constant power output, and wider output voltage, current range
• SCOPE display mode to read voltage / current / power curve directly
• CV / CC priority, with adjustable rise/fall time
• List edit function for 50 group timed output
• Function generating function to get access to rich dynamic waveform
• Remote voltage compensation
• Parallel by multi-device to expand power range up to 128KW
• Support to save/recall 128 group application data
• 4.3" TFT LCD
• Standard RS485 communication interface, and optional dry node/analog interface
• Smart temperature sensitive fan

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

This instrument has stable performance, high accuracy, high reliability, clear reading function. Can test AC / DC current, AC / DC voltage, resistance, capacitance, etc, with diode testing, continuity, temperature and other functions.- USB Interface

• 3.7 in high resolution LCD digital display screen, it is more clear and convenient to measuring datas.
• An excellent tool for instruments and laboratories, factories, radio enthusiasts and families.
• Up to 65 readings per second, support for two ??? line display, support SCPI, maximum display 55000 counts.
• Data logging function, you can record the measured data into the memory, and then use the computer to read and process the recorded data.
• Simple to operate and easy to use interface, you can access, stor
• e, process and manage data by simply displaying the results in tabular form

Additional Information:

• Packaging Details: Package List: Mini Desktop Multimeter, Test Leads, Instruction Manual, Power A

The Owon SDS1202 Digital Storage Oscilloscope features 2 channels, up to 1GS/s real-time sample rates, maximum 200MHz bandwidth. The SDS1202 offers a 7-inch color LCD screen with 800x600 resolution. The SDS1202 has a ultra-thin body at only 70mm deep for portability, and it offers a 10K record length per channel of memory.

Bandwidth: 200 MHz
2-Channel
Sample rate: 1GS/s

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Accesories Power Cord, CD Rom, Quick Guide, USB Cable, Probe, Probe Adjust

2 channel DSO with 300 MHz bandwidth, 2.5 GSa/s sample rate, 40 MSa memory depth with a resolution of 800 x 600 pixel.

• 300MHz Bandwidth，2.5GS/s sample rate
• 8-bit high resolution ADC
• 40M record length max 70,000 wfms/s waveform refresh rate
• low back ground noise
• 8 inch 800 x 600 high resolution LCD
• SCPI, and LabVIEW supported
• multi- trigger, and bus decoding function (Optional)

Creative New Look

• ultra-thin body-design, less space accommodation
• multi-interface integration - USB host, USB device, USB port for PictBridge, LAN, AUX, and more
• VGA port - better solution for video expansion, and teaching demonstration

Additional Information:

• Delivery Time: Same day
• Packaging Details: The accessories subject to final delivery. Power Cord CD Rom Quick Guide USB Cable Probe Probe Adjust Capacitance Ext Module (optional) Multimeter Lead (optional) Q9 (optoinal) Soft Bag (optional) Battery (optional)

Owon SDS-6062 Deep Memory Digital Storage Oscilloscope : 60 MHz ,2 CH, Coloured LCD 8

The SDS6062 offers 60 MHz bandwidth, a sample rate of 250 MSa/s in dual channel and a memory depth of 10 MSa per channel.
Includes 2 probes, a USB cable, PC software, a power adapter and a user manual."

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Power Cord CD Rom Quick Guide USB Cable Probe Probe Adjust Soft Bag (optional)

•  
  • Bandwidth: 200 MHz,
  • Channels: 2 +1 (External)
  • Record Length: 10M
  • Sample Rate: 2GS/S
  • Display: 8”color LCD, 800 x 600 pixels, VGA Port
  • Delivery including 2 probes, USB cable, pc software, power cable and manual.
 200 MHz, 2 GSa/s 

 

 

The colorful 8" (20.3 cm) TFT LCD panel with the resolution of 800 × 600 allows an excellent readability of the wave, especially in regards to high data volume or many waves covered reciprocally.

The SDS8202 offers a bandwidth of 200 MHz, a sample rate of 2 GSa/s in dual channel and VGA Interface

Delivery including 2 probes, a USB cable, PC software, a power adapter and a user manual.

Additional Information:

• Delivery Time: Same day
• Packaging Details: Delivery including 2 probes, USB cable, pc software, power cable and manual.

• Frequency Range from 9 kHz up to 7.5 GHz
• 160dBm Displayed Average Noise Level
• Phase Noise -98dBc/Hz @1Gz and offset at 10KHz
• Total Amplitude Accuracy <1.5dB
• 10Hz Minimum Resolution Bandwidth (RBW)
• EMI Pre-compliance Test Kit, optional EMC test software
• Standard Pass/Fail on-site test alert ability
• Up to 7.5 GHz Tracking Generator Kit
• 10.4 inches display

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

OWON XDG3102 Dual Channel 100MHz 1.25GSa/s 14 bits Arbitrary Waveform Generator with Touch Screen 

• Advanced DDS technology, up to 100MHz frequency output
• 1.25GS/s sampling rate, and 1 μHz frequency resolution
• Up to 1M arbitrary waveform length
• Vertical resolution : 14 bits
• Comprehensive waveform output : 6 group basic waveforms, and 152 group built-in arbitrary waveforms
• Comprehensive modulation options: AM, FM, PM, FSK, 3FSK, 4FSK, PSK, OSK, ASK, BPSK, PWM, sweep, and burst
• High-accuracy frequency counter integrated, ranging from 100mHz till 200MHz
• SCPI, and LabVIEW supported
• 8'' 800 x 600 pixels touch screen LCD

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Accessoires Included: 1 x AG1022F waveform generator 1 x 220V Power cable 1 x CD ROM 1 x Quick start guide 1 x USB Cable 1 x BNC to BNC Cable

Features :

• 3½ Digits
• 2000 Counts
• Manual Ranging
• AC Current upto 1000A (50Hz ~ 60Hz)
• AC Voltage upto 750V (45Hz ~ 450Hz)
• DC Voltage upto 1000V
• Resistance upto 20KΩ
• Over Load Protection
• Over Volt Protection
• Audible Continuity
• Data Hold
• Low Battery Indication
• Jaw Opening : Cable Dia. 53mm (max.)

UT18 series are designed for testing AC/DC voltage, 3-phase voltage, phase sequence, continuity, and more. This series is categorized as CAT IV 600V and meets IP65 standard.
These voltage testers are perfect tools for electricians to quickly measure voltage levels in all environments

- RCD test, LCD display
- very solid construction
- dust and water proof (IP65 Rated)
- voltage indication via LED diodes
- integrated LED light
- phase rotation test
- continuity buzzer
- polarity detection

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing