Atal Tools

FNIRSI 1014D is a 100 MHz bandwidth dual-channel oscilloscope with a built-in waveform generator. The oscilloscope features a high real-time sampling rate of 1 GS/s, 240 kB memory, a large 7-inch display with 800 × 480 resolution, and advanced features for capturing, analyzing, and recording measurement results. Besides, the device features high voltage protection, which ensures safe operation with signals up to 400 V. Built-in function generator generates 14 types of signals, voltage resolution is 8 bit, voltage 5 Vpeak-peak. FNIRSI 1014D is equipped with a USB interface to connect to the computer. This oscilloscope is designed for diagnostics and tuning of radio and electronic equipment.

• Compact and functional oscilloscope.
• Large 7-inch TFT display (800 × 480 pixels).
• High voltage protection: built-in module provides protection up to 400 V.
• Built-in 1 GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
• Automatic measurement function.
• Roll function.
• Lissajous figures graphic display function.
• Screen brightness adjustment function.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: includes: 2 X 100 Mhz Probes, Power Adaptor, USB Cable, Manual

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability

• The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz.
• With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals.
• Maximum measured voltage signal is 400 V.
• Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments

 Functions (Component Tester)

• Automatically analyse NEC protocol infrared code.
• Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

 Functions (Signal Generator)

• The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

HTC DSO- 10100S Digital Storage Oscilloscope a two in one oscilloscope and signal generator, the real-time sampling rate is 1GSa / s and with 100MHz analog bandwidth, with 7 inch TFT LCD display screen, the built-in high-voltage protection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope burning accident caused by the probe not moving to 10x gear, built in DDS function signal generator.

• Built in DDS signal generator, support 12 kinds of function signal..
• Bandwidth: 100MHz , Number of channels: 2 channels, Maximum real time sampling rate: 1GSa/s
• Fully fit 7 inch 800 * 480 resolution color TFT LCD
• High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V.
• Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
• Cursor measurement function: it is convenient to manually measure the period and frequency and voltage.
• Complete triggering function (single, normal, automatic), and at any time, the waveform display (STOP function) is frozen.
• Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.
• Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
• Equipped with a USB interface

• 100MHz analogbandwidth @ 1GSa/s sampling rate (1X=SMHz.10X=100MHz)- 2 Channel
• Intelligent anti-burn,1X can withstand up to 400V withstand voltage
• One-button waveform  storage and screenshot.
• Equipped with high efficiency One-button AUTO
• At any time,the waveform display (pause function) isfrozen.
• FFT display function,cananalyze the spectral characteristics of the signal.
• Built in 6000mAh rechargeable lithium battery.fully charged for 4 hours of continuous use at the highest screen brightness.
• Screen brightness adjustment
• Background grid brightness adjustment.
• Ultra thin,easy to carry.

HTC DSO- 10100S Digital Storage Oscilloscope a two in one oscilloscope and signal generator, the real-time sampling rate is 1GSa / s and with 100MHz analog bandwidth, with 7 inch TFT LCD display screen, the built-in high-voltage protection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope burning accident caused by the probe not moving to 10x gear, built in DDS function signal generator.

• Built in DDS signal generator, support 12 kinds of function signal..
• Bandwidth: 100MHz , Number of channels: 2 channels, Maximum real time sampling rate: 1GSa/s
• Fully fit 7 inch 800 * 480 resolution color TFT LCD
• High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V.
• Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
• Cursor measurement function: it is convenient to manually measure the period and frequency and voltage.
• Complete triggering function (single, normal, automatic), and at any time, the waveform display (STOP function) is frozen.
• Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.
• Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
• Equipped with a USB interface