Atal Tools

• High thermal resolution and wide measuring range for maximum applications
• Voice note and Bosch Thermal On app enable easy documentation of thermal images
• Intuitive user interface and seamlessly integrated features deliver successful results in minimum clicks
• SKU 0 601 083 5K0

This product is a professional, hand-held meter for non-contact Infrared and K-type thermocouple temperature measurement that is simple to use, highly accurate, and with a wide temperature range.

• Data Logging 20 groups
• Color Display
• Auto Power Off
• Spectral Response 8-14 μm
• Laser <1mW / 630-670nm
• ℃/℉ Selection
• Response Time 0.5 second
• Relative Humidity 10%~90%
• Laser Target Pointer
• High/Low Alarm Setting
• Reading Hold
• Lock selection
• MAX/MIN/AVG/DIF
• Display Backlight
• Low Battery Display

• Air Velocity Measurement
• Air Velocity Grade
• Temperature Measurement
• Air Volume Measurement
• LCD
• Max Display: 9999
• Sampling Rate: 0.5Sec
• IEC61672-I CLASS2
• Data Hold
• Backlight
• Auto Power Off
• Low Battery Indicator
• Battery: 1.5V AAA*3

UT302+/UT303+ series infrared thermometer can quickly and accurately determine the surface temperature by measuring the infrared energy radiated from the target surface. It is suitable for non-contact surface temperature measurement. 

• ±1.5℃ temperature measurement accuracy
• User defined visual and audio alarm
• High contrast EBTN color display
• MAX/MIN/AVG/DIFF/Hold modes
• Dual lasers (UT302D+/UT303D+)
• Temperature recording up to 99 groups (UT302C+/UT303C+/UT302D+/UT303D+)
• Date/time display (UT302C+/UT302D+/UT303C+/UT303D+)
• Time scheduled measurement (UT302C+/UT303C+/UT302D+/UT303D+)

Best Seller 

Simple - Immediate measuring results at one simple press with the selection of 3 emissivity gradings for more precise measurementCompact - Easy to carry around thanks to the ergonomic housing design with carrying pouchVersatile - Wide temperature measurement range for extreme conditions with press and hold continuous measuring function

• Type of Product: Thermo Detector
• Laser diode*: Laser class 2, 635 nm
• Power supply and runtime: 2 x 1.5V LR6 (AA) batteries 9h
• Measurement range: Surface temperature, -30 degC to +500 degC

SKU: 0 601 083 480
EAN: 6949509229861

The sensor is made of very thin (ϕ0.2mm) metal wire. It should be used with care and not bend or break.

The housing of the thermometer is made of plastic. Do not touch the tip of the soldering iron.

The sensor is a consumable item (life of about 50-60 times), long time use, the alloy layer is worn out, the measurement will be inaccurate, and need to be replaced New sensor.

Alcohol can be used to clean the flux attached to the terminal. Do not use thinner or volatile oil.

If the display shows -1, it means that the temperature sensor has been scrapped (or no sensor is installed) and a new one needs to be replaced.

If it displays, it means the battery is low, and the temperature cannot be measured normally, and the battery needs to be replaced. It is recommended remove the battery if not to use it for a long time .

The 191-212 temperature sensor is only suitable for measuring the temperature below 500℃, such as measuring higher temperature, please use the appropriate Temperature probe.

Do not blow the hot air gun directly to the ST-1090 for measurement. Blowing directly will damage the ST-1090 host

Package Includes 

Host ST-1090:1

K-type thermo couple test wire:1

Sensor : 10

MINI USB data line 1