Atal Tools

The UT622 Series Handheld LCR meters feature powerful functions,  high accuracy, fast speed, and long standby time.  With a clear and intuitive 2.8-inch TFT LCD display, large-capacity rechargeable batiery, and up to 100kHz test frequency, the meters can be used for longstanding accurate and convenient measurement in any occasion.  They are suitable for the measurement and screening of inductance, capacitance,  and resistance in laboratories, production lines, maintenance points etc.

Up to 100kHz test frequency

Up to 0.1% measurement accuracy

Max reading of primary parameters:99999 counts; D/Q resolution: 0.0001

Maximum test speed: 20 times/s (UT622E)

Tolerance range: 1%~20%

Open/Short circuit clear function

Data hold and recording mode

Standard Mini-USB interface,  SCPI command set

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

UT610 series is a handheld LCR digital electric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. It has the features of low power dissipation, high accuracy and fast speed. It can select the series-parallel measurement mode; measure the quality factor of components, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance and resistance mode to satisfy the actual requirement.

Additional Information:

• Delivery Time: Same day
• Packaging Details: Display Count: 20000 D/Q Display Count: 2000 D/Q Resolution: 0.001 Auto Range: ¿¿¿ Real-Time Display Test Frequency: ¿¿¿ Measurement Mode: Series/Parallel Auto Power Off: ¿¿¿ Low Battery Indication: ¿¿¿6.8V Data Hold: ¿¿¿ Relative Mode: ¿¿¿ Analogue Bar Graph: 26 Deviation Ratio Measurement: ¿¿¿ Comparsion Function: ¿¿¿ Calibration Function: ¿¿¿ Output Impedance: 120¿¿ Auto LCR Smart Check and Measurement: ¿¿¿

This series desktop bridge incorporates 3.5-inch TFT display, user-friendly interface, and a variety of measurement parameters into one body. It is convenient for users to carry out remote control with USB and RS232 and also perform the sorting of
components using handle. In function, it can not only adjust the output frequency and test level, but also record the value of components in the process of measurement. In the performance parameters, its basic accuracy reaches 0.2%.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing

The UTR2810 Series LCR digital bridge is a new generation of low frequency components measuring instrument launched by UNI-T. Small size, light weight, beautiful appearance, simple operation, ultra-high cost performance and good test stability. It can meet the needs of production line quality assurance, incoming inspection and automatic production..

• 2.8" TFT truecolor LCD 
• Multiple measurement frequency: 100Hz,120Hz,1kHz,10kHz,
• Accuracy: 0.02%
• Highest measurement accuracy: 0.1%
• The main and auxiliary parameters can be matched freely, with 42 combinations in total
• Test speed: slow/medium/fast
• The fastest test speed is 33times/s
• Automatic LCR measurement function
• Comparator function (4th gear sorting)
• UTR2810E can send sorting signal through Handler interface
• UTR2810E can be connected to the upper computer for statistical analysis
• UTR2810E has bus trigger and external trigger functions

Additional Information:

• Delivery Time: Same Day
• Packaging Details: Standard Packing