Atal Tools

The UTE9800 Series intelligent electric parameter measuring instrument, also known as digital power meter, is an economical and portable measuring instrument. It is a multifunctional measuring instrument integrating voltage, current, power, power factor and frequency.

Multiple windows simultaneously display the measured voltage, current, power, power factor, frequency, voltage crest factor and current crest factor.

Volage Range: 3.0V~600V

Current Range: 0.5mA~20.0A

Frequency Range: 40Hz~130Hz；BW 5kHz

Accuracy: ± (0.4% reading + 0.1 range + 1 digit)

True RMS measurement. Can measure AC、DC、AC+DC

Connectivity: RS-232/RS-485

Automatic switching of voltage and current range to improve the measurement accuracy.

The measurement accuracy is not affected by waveform, high reliability and long service life.

AC/DC Type is more suitable for measurement of half wave rectifier.

Set the upper and lower limit alarm parameters of current and power, and provide audible and visual alarm.

With RS-232 and RS-485 serial communication interface, it is convenient to communicate with computer or PLC.

• Broad measurement range extending from leakage currents to load currents.
• Speed up pass/fail judgments with the built-in comparator function.
• Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)

VA LCD display, intuitive reading, using high-speed DSP processor + phase-locked loop (PLL) for operation.

Multiple windows simultaneously display the measured voltage, current, power, power factor, frequency, voltage crest factor and current crest factor.

Phase locked loop (PLL) synchronization method, and the maximum harmonic analysis is 50 times.

Automatic switching of voltage and current range to improve the measurement accuracy.

High reliability and long service life.

Set the upper and lower limit alarm parameters of current and power, and provide audible and visual alarm.

With RS-232 and RS-485 serial communication interface, it is convenient to communicate with computer or PLC.

Communication address: 1 ~ 32, baud rate: 9600、19200、38400、115200.

UTE9800+ Series is an economical portable intelligent electric parameter measuring instrument. Multifunctional measuring instrument integrating voltage, current, power, power factor and frequency. High cost performance, widely used in production, measure, quality and scientific research and other fields.

• Voltage Range: 3.0V~600V
• Current Range: 0.5mA~20.0A
• Frequency Range : DC, 40Hz~400Hz
• Accuracy: ± (0.4% reading + 0.1 range + 1 digit)
• Measurement Mode: AC，DC，AC+DC
• Connectivity: RS-232/RS-485
• Size: ½ 2U
• Display: VA LCD

• VA LCD display, intuitive reading, using high-speed DSP processor + phase-locked loop (PLL) for operation.
• Multiple windows simultaneously display the measured voltage, current, power, power factor, frequency, voltage crest factor and current crest factor.
• Phase locked loop (PLL) synchronization method, and the maximum harmonic analysis is 50 times.
• Automatic switching of voltage and current range to improve the measurement accuracy.
• High reliability and long service life.
• Set the upper and lower limit alarm parameters of current and power, and provide audible and visual alarm.
• With RS-232 and RS-485 serial communication interface, it is convenient to communicate with computer or PLC.
• Communication address: 1 ~ 32, baud rate: 9600、19200、38400、115200.

ToolWorld is Authorized UNI-T Distributor

Includes calibration/conformity report