Atal Tools

• Automatic shutdown (OFF after 10 minutes);
• Can calculate the maximum value of torque, minimum and mean value;
• Torque value display automatically zeroes;
• Automatic deletion of torque value (the time required to adjust the automatic reset by switching)
• Use LCD to display test values. Easy to read.
• The torque value can be set and the buzzer can be used to prompt the operator
• When setting tool torque, peak display is retained until reset to ensure accuracy
• It can be tested when the reverse direction is reversed
• Inverse time direction measurement, data show negative;
• The strain gauge is directly attached to the torsion sensor. The design of its own shock-proof device is simple
• Can be connected to external data processing control system
• This tester USES rechargeable batteries. Small size. Light weight, easy to carry
• The data output port can be transmitted to the computer for processing

• Imported brushless motor, strong performance, high stability and long ser vice life.
• Low vibration, low noise, low electromagnetic interference, comply with environmental requirements, especially applicable to dustfree working environment.
• The internal stop device adopts magnetic induction system, with high sensitivity, instantaneous braking, low impact force, and long-term use not easily damaged.
• The newest power supply design, break through the traditional volume big, the power consumption big drawback, use medium is lighter, more convenient, apply to 100V ~ 250V working environment.
• The torque is accurate, the torque is accurate and the torque is adjusted by using professional tools so that you don't have to worr y about the torque.
• A perfect combination of push-start and push-down dual mode functions, with just a small switch to make your use more arbitrary.
• Specially designed for screw assembly automation equipment, with signal output, is the best choice for the manufacturer of screw assembly automation equipment.
• The speed of 0-1200rpm can be adjusted to suit your different needs.
• The products are fully functional and meet all kinds of industrial needs

Torque wrench is now a must have tool for all garages and workshops. A torque wrench allows a user to precisely tighten a nut or a bolt to an optimum rotational force or torque.

Advantages of torque master® torque wrenches:

·         Extra Heavy Duty: With the use of high strength alloy steel and precise heat treatment, the torque wrenches are built to last.

·         Sturdy Storage: Supplied with an aesthetically pleasing rugged blow moulded case and with a sturdy steel case above for extra care and protection for your valuable tool.

·         Accuracy: With a torque tolerance of ±3%, the accuracy exceeds any national or international torque standard including ISO 6789: 2017.

·         Three phase mechanism: Sight, Touch and sound signal unmistakably lets the user know that the torque has been achieved even in a noisy environment.

·         Comfort: The synthetic double moulded handle is manufactured by specially selected resin  which provides comfort and durability and resists chemicals in automotive and industrial usage. The new Ergonomic shape and higher proportion of soft feel high grip material make it a lot more comfortable.

·         Bi-Directional torque: Torque can be applied in both right handed and left handed threaded nuts and bolts.

·         Range: Covers a vast range from 2 Nm to 3450 Nm.

·         Ideal for confined spaces: With the low re-engagement angle of 6 degrees for all ratchet type models, Working in confined spaces is not a hassle anymore.

·         Available in both Standard and Ratcheting type. Production type and open end type can be supplied against specific orders.

During development, durability has been on top of our priority, both in terms of the life of the tool and the calibration of the tool. Full load torture tests are carried out on each and every torque wrench prior to dispatch. The result is a product that you can use with complete confidence that you have the best tool for the job.

Torque wrench is now a must have tool for all garages and workshops. A torque wrench allows a user to precisely tighten a nut or a bolt to an optimum rotational force or torque.

Advantages of torque master® torque wrenches:

·         Extra Heavy Duty: With the use of high strength alloy steel and precise heat treatment, the torque wrenches are built to last.

·         Sturdy Storage: Supplied with an aesthetically pleasing rugged blow moulded case and with a sturdy steel case above for extra care and protection for your valuable tool.

·         Accuracy: With a torque tolerance of ±3%, the accuracy exceeds any national or international torque standard including ISO 6789: 2017.

·         Three phase mechanism: Sight, Touch and sound signal unmistakably lets the user know that the torque has been achieved even in a noisy environment.

·         Comfort: The synthetic double moulded handle is manufactured by specially selected resin  which provides comfort and durability and resists chemicals in automotive and industrial usage. The new Ergonomic shape and higher proportion of soft feel high grip material make it a lot more comfortable.

·         Bi-Directional torque: Torque can be applied in both right handed and left handed threaded nuts and bolts.

·         Range: Covers a vast range from 2 Nm to 3450 Nm.

·         Ideal for confined spaces: With the low re-engagement angle of 6 degrees for all ratchet type models, Working in confined spaces is not a hassle anymore.

·         Available in both Standard and Ratcheting type. Production type and open end type can be supplied against specific orders.

During development, durability has been on top of our priority, both in terms of the life of the tool and the calibration of the tool. Full load torture tests are carried out on each and every torque wrench prior to dispatch. The result is a product that you can use with complete confidence that you have the best tool for the job.

• Attention:  Clockwise operation only                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

Torque wrench is now a must have tool for all garages and workshops. A torque wrench allows a user to precisely tighten a nut or a bolt to an optimum rotational force or torque.

Advantages of torque master® torque wrenches:

·         Extra Heavy Duty: With the use of high strength alloy steel and precise heat treatment, the torque wrenches are built to last.

·         Sturdy Storage: Supplied with an aesthetically pleasing rugged blow moulded case and with a sturdy steel case above for extra care and protection for your valuable tool.

·         Accuracy: With a torque tolerance of ±3%, the accuracy exceeds any national or international torque standard including ISO 6789: 2017.

·         Three phase mechanism: Sight, Touch and sound signal unmistakably lets the user know that the torque has been achieved even in a noisy environment.

·         Comfort: The synthetic double moulded handle is manufactured by specially selected resin  which provides comfort and durability and resists chemicals in automotive and industrial usage. The new Ergonomic shape and higher proportion of soft feel high grip material make it a lot more comfortable.

·         Bi-Directional torque: Torque can be applied in both right handed and left handed threaded nuts and bolts.

·         Range: Covers a vast range from 2 Nm to 3450 Nm.

·         Ideal for confined spaces: With the low re-engagement angle of 6 degrees for all ratchet type models, Working in confined spaces is not a hassle anymore.

·         Available in both Standard and Ratcheting type. Production type and open end type can be supplied against specific orders.

During development, durability has been on top of our priority, both in terms of the life of the tool and the calibration of the tool. Full load torture tests are carried out on each and every torque wrench prior to dispatch. The result is a product that you can use with complete confidence that you have the best tool for the job.

Torque wrench is now a must have tool for all garages and workshops. A torque wrench allows a user to precisely tighten a nut or a bolt to an optimum rotational force or torque.

Advantages of torque master® torque wrenches:

·         Extra Heavy Duty: With the use of high strength alloy steel and precise heat treatment, the torque wrenches are built to last.

·         Sturdy Storage: Supplied with an aesthetically pleasing rugged blow moulded case and with a sturdy steel case above for extra care and protection for your valuable tool.

·         Accuracy: With a torque tolerance of ±3%, the accuracy exceeds any national or international torque standard including ISO 6789: 2017.

·         Three phase mechanism: Sight, Touch and sound signal unmistakably lets the user know that the torque has been achieved even in a noisy environment.

·         Comfort: The synthetic double moulded handle is manufactured by specially selected resin  which provides comfort and durability and resists chemicals in automotive and industrial usage. The new Ergonomic shape and higher proportion of soft feel high grip material make it a lot more comfortable.

·         Bi-Directional torque: Torque can be applied in both right handed and left handed threaded nuts and bolts.

·         Range: Covers a vast range from 2 Nm to 3450 Nm.

·         Ideal for confined spaces: With the low re-engagement angle of 6 degrees for all ratchet type models, Working in confined spaces is not a hassle anymore.

·         Available in both Standard and Ratcheting type. Production type and open end type can be supplied against specific orders.

During development, durability has been on top of our priority, both in terms of the life of the tool and the calibration of the tool. Full load torture tests are carried out on each and every torque wrench prior to dispatch. The result is a product that you can use with complete confidence that you have the best tool for the job.